# translation of kio4.po to 简体中文
# Copyright (C) 2007 Free Software Foundation, Inc.
#
#
# Wang Jian <lark@linux.ustc.edu.cn>, 1998.
# Sarah Smith <sarahs@redhat.com>, 2002.
# Xiong Jiang <jxiong@offtopic.org>, 2002,2003.
# Funda Wang <fundawang@linux.net.cn>, 2002,2003,2004.
# Liang Qi <cavendish.qi@gmail.com>, 2007.
# Ni Hui <shuizhuyuanluo@126.com>, 2009, 2010, 2011, 2012.
# Feng Chao <chaofeng111@gmail.com>, 2010, 2012, 2013, 2014.
# Lie Ex <lilith.ex@gmail.com>, 2007-2010.
# Weng Xuetian <wengxt@gmail.com>, 2011, 2012.
msgid ""
msgstr ""
"Project-Id-Version: kio4\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
"POT-Creation-Date: 2014-03-28 02:03+0000\n"
"PO-Revision-Date: 2014-05-24 10:17+0800\n"
"Last-Translator: Feng Chao <chaofeng111@gmail.com>\n"
"Language-Team: Chinese Simplified <kde-i18n-doc@kde.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 1.5\n"

#: kbookmark.cpp:307
msgctxt "KBookmark|Bookmark separator"
msgid "--- separator ---"
msgstr "--- 分隔符 ---"

#: kbookmarkcontextmenu.cpp:62
msgctxt "KBookmarkContextMenu|"
msgid "Add Bookmark Here"
msgstr "在此添加书签"

#: kbookmarkcontextmenu.cpp:68
msgctxt "KBookmarkContextMenu|"
msgid "Open Folder in Bookmark Editor"
msgstr "在书签编辑器中打开文件夹"

#: kbookmarkcontextmenu.cpp:71
msgctxt "KBookmarkContextMenu|"
msgid "Delete Folder"
msgstr "删除文件夹"

#: kbookmarkcontextmenu.cpp:76
msgctxt "KBookmarkContextMenu|"
msgid "Properties"
msgstr "属性"

#: kbookmarkcontextmenu.cpp:81
msgctxt "KBookmarkContextMenu|"
msgid "Copy Link Address"
msgstr "复制链接地址"

#: kbookmarkcontextmenu.cpp:84
msgctxt "KBookmarkContextMenu|"
msgid "Delete Bookmark"
msgstr "删除书签"

#: kbookmarkcontextmenu.cpp:90
msgctxt "KBookmarkContextMenu|"
msgid "Open Folder in Tabs"
msgstr "在标签中打开文件夹"

#: kbookmarkcontextmenu.cpp:116
msgctxt "KBookmarkContextMenu|"
msgid "Cannot add bookmark with empty URL."
msgstr "无法添加空 URL 的书签。"

#: kbookmarkcontextmenu.cpp:146
msgctxt "KBookmarkContextMenu|"
msgid "Bookmark Folder Deletion"
msgstr "书签文件夹删除"

#: kbookmarkcontextmenu.cpp:147
msgctxt "KBookmarkContextMenu|"
msgid "Bookmark Deletion"
msgstr "书签删除"

#: kbookmarkcontextmenu.cpp:148
#, qt-format
msgctxt "KBookmarkContextMenu|"
msgid ""
"Are you sure you wish to remove the bookmark folder\n"
"\"%1\"?"
msgstr ""
"您确定想要删除书签文件夹\n"
"“%1”吗？"

#: kbookmarkcontextmenu.cpp:149
#, qt-format
msgctxt "KBookmarkContextMenu|"
msgid ""
"Are you sure you wish to remove the bookmark\n"
"\"%1\"?"
msgstr ""
"您确定想要删除书签\n"
"“%1”吗？"

#: kbookmarkdialog.cpp:70
msgctxt "KBookmarkDialog|@label:textbox"
msgid "Name:"
msgstr "名称："

#: kbookmarkdialog.cpp:75
msgctxt "KBookmarkDialog|@label:textbox"
msgid "Location:"
msgstr "位置："

#: kbookmarkdialog.cpp:80
msgctxt "KBookmarkDialog|@label:textbox"
msgid "Comment:"
msgstr "注释："

#: kbookmarkdialog.cpp:191
msgctxt "KBookmarkDialog|@action:button"
msgid "Update"
msgstr "更新"

#: kbookmarkdialog.cpp:192
msgctxt "KBookmarkDialog|@title:window"
msgid "Bookmark Properties"
msgstr "书签属性"

#: kbookmarkdialog.cpp:223 kbookmarkdialog.cpp:261 kbookmarkdialog.cpp:295
msgctxt "KBookmarkDialog|@action:button"
msgid "&New Folder..."
msgstr "新建文件夹(&N)..."

#: kbookmarkdialog.cpp:227 kbookmarkdialog.cpp:265
msgctxt "KBookmarkDialog|@action:button"
msgid "Add"
msgstr "添加"

#: kbookmarkdialog.cpp:228
msgctxt "KBookmarkDialog|@title:window"
msgid "Add Bookmark"
msgstr "添加书签"

#: kbookmarkdialog.cpp:266
msgctxt "KBookmarkDialog|@title:window"
msgid "Add Bookmarks"
msgstr "添加书签"

#: kbookmarkdialog.cpp:299
msgctxt "KBookmarkDialog|@title:window"
msgid "Select Folder"
msgstr "选择文件夹"

#: kbookmarkdialog.cpp:327
msgctxt "KBookmarkDialog|@title:window"
msgid "New Folder"
msgstr "新建文件夹"

#: kbookmarkdialog.cpp:362
msgctxt "KBookmarkDialog|@title:window"
msgid "Create New Bookmark Folder"
msgstr "新建书签文件夹"

#: kbookmarkdialog.cpp:363
#, qt-format
msgctxt "KBookmarkDialog|@title:window"
msgid "Create New Bookmark Folder in %1"
msgstr "在 %1 中新建书签文件夹"

#: kbookmarkdialog.cpp:365
msgctxt "KBookmarkDialog|@label:textbox"
msgid "New folder:"
msgstr "新建文件夹："

#: kbookmarkdialog.cpp:386
msgctxt "KBookmarkDialog|name of the container of all browser bookmarks"
msgid "Bookmarks"
msgstr "书签"

#: kbookmarkimporter_ns.cpp:115
msgctxt "KNSBookmarkImporterImpl|"
msgid "HTML Files (*.html)"
msgstr "HTML 文件(*.html)"

#: kbookmarkimporter_ns.cpp:119
msgctxt "KNSBookmarkImporterImpl|"
msgid "*.html|HTML Files (*.html)"
msgstr "*.html|HTML 文件(*.html)"

#: kbookmarkimporter_ns.cpp:135
#, qt-format
msgctxt "KNSBookmarkImporterImpl|"
msgid ""
"Could not find %1. Netscape is probably not installed. Aborting the export."
msgstr "无法找到 %1. Netscape 可能未安装，停止导出。"

#: kbookmarkimporter_ns.cpp:137
msgctxt "KNSBookmarkImporterImpl|"
msgid "Netscape not found"
msgstr "未找到 Netscape"

#: kbookmarkimporter_ns.cpp:158
msgctxt "KNSBookmarkImporterImpl|"
msgid "<!-- This file was generated by Konqueror -->"
msgstr "<!-- 本文件由 Konqueror 生成 -->"

#: kbookmarkimporter_ns.cpp:161 kbookmarkimporter_ns.cpp:162
msgctxt "KNSBookmarkImporterImpl|"
msgid "Bookmarks"
msgstr "书签"

#: kbookmarkimporter_opera.cpp:119
msgctxt "KOperaBookmarkImporterImpl|"
msgid "Opera Bookmark Files (*.adr)"
msgstr "Opera 书签文件(*.adr)"

#: kbookmarkimporter_opera.cpp:122
msgctxt "KOperaBookmarkImporterImpl|"
msgid "*.adr|Opera Bookmark Files (*.adr)"
msgstr "*.adr|Opera 书签文件(*.adr)"

#: kbookmarkmanager.cpp:442
#, qt-format
msgctxt "KBookmarkManager|"
msgid ""
"Unable to save bookmarks in %1. Reported error was: %2. This error message "
"will only be shown once. The cause of the error needs to be fixed as quickly "
"as possible, which is most likely a full hard drive."
msgstr ""
"无法在 %1 中保存书签。报告的错误是：%2。错误信息只会显示一次。产生错误的原因"
"需要尽快修复，因为很可能是硬盘已满。"

#: kbookmarkmenu.cpp:260
msgctxt "KBookmarkMenu|"
msgid "Open Folder in Tabs"
msgstr "在标签中打开文件夹"

#: kbookmarkmenu.cpp:264
msgctxt "KBookmarkMenu|"
msgid "Open all bookmarks in this folder as a new tab."
msgstr "将此文件夹中的全部书签打开为新标签。"

#: kbookmarkmenu.cpp:279
msgctxt "KBookmarkMenu|"
msgid "Bookmark Tabs as Folder..."
msgstr "将标签添加为书签文件夹..."

#: kbookmarkmenu.cpp:283
msgctxt "KBookmarkMenu|"
msgid "Add a folder of bookmarks for all open tabs."
msgstr "为已打开的全部标签添加书签文件夹。"

#: kbookmarkmenu.cpp:320
msgctxt "KBookmarkMenu|"
msgid "Edit your bookmark collection in a separate window"
msgstr "在另外的窗口中编辑您的书签集"

#: kbookmarkmenu.cpp:331
msgctxt "KBookmarkMenu|"
msgid "New Bookmark Folder..."
msgstr "新建书签文件夹..."

#: kbookmarkmenu.cpp:333
msgctxt "KBookmarkMenu|"
msgid "Create a new bookmark folder in this menu"
msgstr "在该菜单中创建新书签文件夹"

#: konqbookmarkmenu.cpp:59 konqbookmarkmenu.cpp:72
msgctxt "KonqBookmarkContextMenu|"
msgid "Hide in toolbar"
msgstr "在工具栏中隐藏"

#: konqbookmarkmenu.cpp:59 konqbookmarkmenu.cpp:72
msgctxt "KonqBookmarkContextMenu|"
msgid "Show in toolbar"
msgstr "在工具栏中显示"

#: konqbookmarkmenu.cpp:66
msgctxt "KonqBookmarkContextMenu|"
msgid "Open in New Window"
msgstr "在新窗口中打开"

#: konqbookmarkmenu.cpp:67
msgctxt "KonqBookmarkContextMenu|"
msgid "Open in New Tab"
msgstr "在新标签中打开"

#~ msgctxt "NAME OF TRANSLATORS"
#~ msgid "Your names"
#~ msgstr "KDE 中国"

#~ msgctxt "EMAIL OF TRANSLATORS"
#~ msgid "Your emails"
#~ msgstr "kde-china@kde.org"

#~ msgid "A file or folder named %1 already exists."
#~ msgstr "名为 %1 的文件或文件夹已存在。"

#~ msgid "You do not have permission to create that folder."
#~ msgstr "您没有创建该文件夹的权限。"

#~ msgid "You did not select a file to delete."
#~ msgstr "您没有选择要删除的文件。"

#~ msgid "Nothing to Delete"
#~ msgstr "没有可删除的"

#~ msgid ""
#~ "<qt>Do you really want to delete\n"
#~ " <b>'%1'</b>?</qt>"
#~ msgstr ""
#~ "<qt>您真的要删除\n"
#~ "<b>“%1”</b>吗？</qt>"

#~ msgid "Delete File"
#~ msgstr "删除文件"

#~ msgid "Do you really want to delete this item?"
#~ msgid_plural "Do you really want to delete these %1 items?"
#~ msgstr[0] "您真的要删除这 %1 项吗？"

#~ msgid "Delete Files"
#~ msgstr "删除文件"

#~ msgid "You did not select a file to trash."
#~ msgstr "您没有选择要移至回收站的文件。"

#~ msgid "Nothing to Trash"
#~ msgstr "没有可移至回收站的"

#~ msgid ""
#~ "<qt>Do you really want to trash\n"
#~ " <b>'%1'</b>?</qt>"
#~ msgstr ""
#~ "<qt>您真的要将\n"
#~ "<b>“%1”</b>移至回收站吗？</qt>"

#~ msgid "Trash File"
#~ msgstr "移至回收站"

#~ msgctxt "to trash"
#~ msgid "&Trash"
#~ msgstr "移至回收站(&T)"

#~ msgid "translators: not called for n == 1"
#~ msgid_plural "Do you really want to trash these %1 items?"
#~ msgstr[0] "您真的想要删除这 %1 项吗？"

#~ msgid "Trash Files"
#~ msgstr "移至回收站"

#~ msgid "The specified folder does not exist or was not readable."
#~ msgstr "指定的文件夹不存在或不可读。"

#~ msgid "Menu"
#~ msgstr "菜单"

#~ msgid "Parent Folder"
#~ msgstr "父文件夹"

#~ msgid "Home Folder"
#~ msgstr "主文件夹"

#~ msgid "Reload"
#~ msgstr "重新装入"

#~ msgid "New Folder..."
#~ msgstr "新建文件夹..."

#~ msgid "Move to Trash"
#~ msgstr "移至回收站"

#~ msgid "Delete"
#~ msgstr "删除"

#~ msgid "Sorting"
#~ msgstr "排序"

#~ msgid "By Name"
#~ msgstr "按名称"

#~ msgid "By Size"
#~ msgstr "按大小"

#~ msgid "By Date"
#~ msgstr "按日期"

#~ msgid "By Type"
#~ msgstr "按类型"

#~ msgid "Descending"
#~ msgstr "降序"

#~ msgid "Folders First"
#~ msgstr "文件夹在前"

#~ msgid "Icon Position"
#~ msgstr "图标位置"

#~ msgid "Next to File Name"
#~ msgstr "在文件名之后"

#~ msgid "Above File Name"
#~ msgstr "在文件名之上"

#~ msgid "Short View"
#~ msgstr "简要视图"

#~ msgid "Detailed View"
#~ msgstr "详细资料视图"

#~ msgid "Tree View"
#~ msgstr "树状视图"

#~ msgid "Detailed Tree View"
#~ msgstr "详细树状视图"

#~ msgid "Show Hidden Files"
#~ msgstr "显示隐藏文件"

#~ msgid "Show Aside Preview"
#~ msgstr "显示侧边预览"

#~ msgid "Show Preview"
#~ msgstr "显示预览"

#~ msgid "Open File Manager"
#~ msgstr "打开文件管理器"

#~ msgid "&View"
#~ msgstr "查看(&V)"

#~ msgctxt "@title:window"
#~ msgid "New Folder"
#~ msgstr "新建文件夹"

#~ msgctxt "@label:textbox"
#~ msgid ""
#~ "Create new folder in:\n"
#~ "%1"
#~ msgstr ""
#~ "创建新文件夹的位置：\n"
#~ "%1"

#~ msgctxt "@action:button"
#~ msgid "New Folder..."
#~ msgstr "新建文件夹..."

#~ msgctxt "@action:inmenu"
#~ msgid "New Folder..."
#~ msgstr "新建文件夹..."

#~ msgctxt "@action:inmenu"
#~ msgid "Move to Trash"
#~ msgstr "移至回收站"

#~ msgctxt "@action:inmenu"
#~ msgid "Delete"
#~ msgstr "删除"

#~ msgctxt "@option:check"
#~ msgid "Show Hidden Folders"
#~ msgstr "显示隐藏文件夹"

#~ msgctxt "@action:inmenu"
#~ msgid "Properties"
#~ msgstr "属性"

#~ msgid "*|All Files"
#~ msgstr "*|全部文件"

#~ msgid "All Supported Files"
#~ msgstr "支持的全部文件"

#~ msgid "All Files"
#~ msgstr "全部文件"

#~ msgid "Add Places Entry"
#~ msgstr "添加位置项"

#~ msgid "Edit Places Entry"
#~ msgstr "编辑位置项"

#~ msgid ""
#~ "<qt>This is the text that will appear in the Places panel.<br /><br />The "
#~ "label should consist of one or two words that will help you remember what "
#~ "this entry refers to. If you do not enter a label, it will be derived "
#~ "from the location's URL.</qt>"
#~ msgstr ""
#~ "<qt>这是将出现在位置面板中的文字。<br /><br />描述应该由一两个词组成，以便"
#~ "帮助您记住本项的含义。如果不输入，则会根据此地址的 URL 自动获取内容。</qt>"

#~ msgid "L&abel:"
#~ msgstr "标签(&A)："

#~ msgid "Enter descriptive label here"
#~ msgstr "在此输入描述标签"

#~ msgid ""
#~ "<qt>This is the location associated with the entry. Any valid URL may be "
#~ "used. For example:<br /><br />%1<br />http://www.kde.org<br />ftp://ftp."
#~ "kde.org/pub/kde/stable<br /><br />By clicking on the button next to the "
#~ "text edit box you can browse to an appropriate URL.</qt>"
#~ msgstr ""
#~ "<qt>这是与该项关联的位置，可以使用任何合法的 URL。例如：<br /><br />"
#~ "%1<br />http://www.kde.org<br />ftp://ftp.kde.org/pub/kde/stable<br /"
#~ "><br />单击文本编辑框旁边的按钮可以浏览相应的 URL。</qt>"

#~ msgid "&Location:"
#~ msgstr "位置(&L)："

#~ msgid ""
#~ "<qt>This is the icon that will appear in the Places panel.<br /><br /"
#~ ">Click on the button to select a different icon.</qt>"
#~ msgstr ""
#~ "<qt>这是将出现在快速访问面板中的图标。<br /><br />单击按钮可以选择不同的图"
#~ "标。</qt>"

#~ msgid "Choose an &icon:"
#~ msgstr "选择图标(&I)："

#~ msgid "&Only show when using this application (%1)"
#~ msgstr "仅在使用此程序(%1)时显示(&O)"

#~ msgid ""
#~ "<qt>Select this setting if you want this entry to show only when using "
#~ "the current application (%1).<br /><br />If this setting is not selected, "
#~ "the entry will be available in all applications.</qt>"
#~ msgstr ""
#~ "<qt>如果您希望此项仅在使用当前应用程序(%1)时显示，请选择该设置。<br /"
#~ "><br />如果该设置没有被选，此项将在所有应用程序中显示。</qt>"

#~ msgctxt "KFile System Bookmarks"
#~ msgid "Home"
#~ msgstr "主文件夹"

#~ msgctxt "KFile System Bookmarks"
#~ msgid "Network"
#~ msgstr "网络"

#~ msgctxt "KFile System Bookmarks"
#~ msgid "Root"
#~ msgstr "根"

#~ msgctxt "KFile System Bookmarks"
#~ msgid "Trash"
#~ msgstr "回收站"

#~ msgid "&Release '%1'"
#~ msgstr "释放“%1”(&R)"

#~ msgid "&Safely Remove '%1'"
#~ msgstr "安全删除“%1”(&S)"

#~ msgid "&Unmount '%1'"
#~ msgstr "卸载“%1”(&U)"

#~ msgid "&Eject '%1'"
#~ msgstr "弹出“%1”(&E)"

#~ msgid "The device '%1' is not a disk and cannot be ejected."
#~ msgstr "设备“%1”不是一个磁盘，无法弹出。"

#~ msgid "An error occurred while accessing '%1', the system responded: %2"
#~ msgstr "试图“%1”时发生错误，系统响应：%2"

#~ msgid "An error occurred while accessing '%1'"
#~ msgstr "访问“%1”时发生了错误"

#~ msgctxt "@action:inmenu"
#~ msgid "Empty Trash"
#~ msgstr "清空回收站"

#~ msgid "Add Entry..."
#~ msgstr "添加项目..."

#~ msgid "&Edit Entry '%1'..."
#~ msgstr "编辑项目“%1”(&E)..."

#~ msgid "&Hide Entry '%1'"
#~ msgstr "隐藏项目“%1”(&H)"

#~ msgid "&Show All Entries"
#~ msgstr "显示全部项(&S)"

#~ msgid "&Remove Entry '%1'"
#~ msgstr "删除项目“%1”(&R)"

#~ msgctxt "@info"
#~ msgid "Do you really want to empty the Trash? All items will be deleted."
#~ msgstr "您真的要清空回收站吗？里面所有的内容都将被删除。"

#~ msgctxt "@action:button"
#~ msgid "Empty Trash"
#~ msgstr "清空回收站"

#~ msgid "Show Hidden Folders"
#~ msgstr "显示隐藏文件夹"

#~ msgid ""
#~ "<qt>While typing in the text area, you may be presented with possible "
#~ "matches. This feature can be controlled by clicking with the right mouse "
#~ "button and selecting a preferred mode from the <b>Text Completion</b> "
#~ "menu.</qt>"
#~ msgstr ""
#~ "<qt>在文本区域输入的时候，您将会得到可能匹配的提示。若要控制此功能，您可以"
#~ "单击鼠标右键，然后从<b>文本补全</b>菜单中选择希望的模式。</qt>"

#~ msgid "Drive: %1"
#~ msgstr "驱动器：%1"

#~ msgid ""
#~ "<qt>Click this button to enter the parent folder.<br /><br />For "
#~ "instance, if the current location is file:/home/%1 clicking this button "
#~ "will take you to file:/home.</qt>"
#~ msgstr ""
#~ "<qt>单击此按钮来进入父文件夹。<br /><br />例如，如果当前位置是：file:/"
#~ "home/%1，单击此按钮将把您带到 file:/home。</qt>"

#~ msgid ""
#~ "Click this button to move backwards one step in the browsing history."
#~ msgstr "单击此按钮在浏览历史中向后移动一步。"

#~ msgid "Click this button to move forward one step in the browsing history."
#~ msgstr "单击此按钮在浏览历史中向前移动一步。"

#~ msgid "Click this button to reload the contents of the current location."
#~ msgstr "单击此按钮可刷新当前位置的内容。"

#~ msgid "Click this button to create a new folder."
#~ msgstr "单击此按钮可创建新文件夹。"

#~ msgid "Show Places Navigation Panel"
#~ msgstr "显示位置导航面板"

#~ msgid "Show Bookmarks"
#~ msgstr "显示书签"

#~ msgid "Options"
#~ msgstr "选项"

#~ msgid ""
#~ "<qt>This is the preferences menu for the file dialog. Various options can "
#~ "be accessed from this menu including: <ul><li>how files are sorted in the "
#~ "list</li><li>types of view, including icon and list</li><li>showing of "
#~ "hidden files</li><li>the Places navigation panel</li><li>file previews</"
#~ "li><li>separating folders from files</li></ul></qt>"
#~ msgstr ""
#~ "<qt>这是文件对话框的配置菜单。此菜单中可访问的各种选项包括：<ul><li>列表中"
#~ "的文件如何排序</li><li>视图类型，包括图标和列表</li><li>隐藏文件的显示与否"
#~ "</li><li>位置导航面板</li><li>文件预览</li><li>区分文件和文件夹</li></"
#~ "ul></qt>"

#~ msgid "Zoom out"
#~ msgstr "缩小"

#~ msgid "Zoom in"
#~ msgstr "放大"

#~ msgid "&Name:"
#~ msgstr "名称(&N)："

#~ msgid ""
#~ "<qt>This is the filter to apply to the file list. File names that do not "
#~ "match the filter will not be shown.<p>You may select from one of the "
#~ "preset filters in the drop down menu, or you may enter a custom filter "
#~ "directly into the text area.</p><p>Wildcards such as * and ? are allowed."
#~ "</p></qt>"
#~ msgstr ""
#~ "<qt>这是应用到文件列表的过滤器。不符合该过滤器的文件名将不会被显示。<p>您"
#~ "可以从下拉菜单中选择预设的过滤器，或者直接在文本区域中输入自定义的过滤器。"
#~ "</p><p>允许使用 * 和 ? 通配符。</p></qt>"

#~ msgid "&Filter:"
#~ msgstr "过滤(&F)："

#~ msgid "You can only select one file"
#~ msgstr "只能选择一个文件"

#~ msgid "More than one file provided"
#~ msgstr "给定的文件多于一个"

#~ msgid "You can only select local files"
#~ msgstr "只能选择本地文件"

#~ msgid "Remote files not accepted"
#~ msgstr "不接受远程文件"

#~ msgid ""
#~ "More than one folder has been selected and this dialog does not accept "
#~ "folders, so it is not possible to decide which one to enter. Please "
#~ "select only one folder to list it."
#~ msgstr ""
#~ "此对话框不能接受您所选择的多个文件夹，因为无法决定要进入的那个。请从列表中"
#~ "选择唯一的文件。"

#~ msgid "More than one folder provided"
#~ msgstr "给定的文件夹多于一个"

#~ msgid ""
#~ "At least one folder and one file has been selected. Selected files will "
#~ "be ignored and the selected folder will be listed"
#~ msgstr ""
#~ "至少需要选择一个文件夹和一个文件。所选文件将被忽略，而只列出您所选择的文件"
#~ "夹"

#~ msgid "Files and folders selected"
#~ msgstr "所选文件和文件夹"

#~ msgid "The file \"%1\" could not be found"
#~ msgstr "找不到文件“%1”"

#~ msgid "Cannot open file"
#~ msgstr "无法打开文件"

#~ msgid "This is the name to save the file as."
#~ msgstr "这是文件要保存的名称。"

#~ msgid ""
#~ "This is the list of files to open. More than one file can be specified by "
#~ "listing several files, separated by spaces."
#~ msgstr "这是要打开的文件列表。如果想要指定多个文件，可以用空格分隔。"

#~ msgid "This is the name of the file to open."
#~ msgstr "这是要打开的文件名。"

#~ msgctxt "@title:window"
#~ msgid "Places"
#~ msgstr "位置"

#~ msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
#~ msgstr "文件“%1”已经存在。您想要覆盖它吗？"

#~ msgid "Overwrite File?"
#~ msgstr "要覆盖文件吗？"

#~ msgid ""
#~ "The chosen filenames do not\n"
#~ "appear to be valid."
#~ msgstr "选中的文件名似乎无效。"

#~ msgid "Invalid Filenames"
#~ msgstr "无效的文件名"

#~ msgid "You can only select local files."
#~ msgstr "只能选择本地文件。"

#~ msgid "Remote Files Not Accepted"
#~ msgstr "不接受远程文件"

#~ msgid "*|All Folders"
#~ msgstr "*|全部文件夹"

#~ msgid "&Open"
#~ msgstr "打开(&O)"

#~ msgid "Icon size: %1 pixels (standard size)"
#~ msgstr "图标尺寸：%1 像素(标准尺寸)"

#~ msgid "Icon size: %1 pixels"
#~ msgstr "图标尺寸：%1 像素"

#~ msgid "Automatically select filename e&xtension (%1)"
#~ msgstr "自动选择文件扩展名(%1)(&X)"

#~ msgid "the extension <b>%1</b>"
#~ msgstr "扩展名 <b>%1</b>"

#~ msgid "Automatically select filename e&xtension"
#~ msgstr "自动选择文件扩展名(&X)"

#~ msgid "a suitable extension"
#~ msgstr "适合的扩展名"

#~ msgid ""
#~ "This option enables some convenient features for saving files with "
#~ "extensions:<br /><ol><li>Any extension specified in the <b>%1</b> text "
#~ "area will be updated if you change the file type to save in.<br /><br /></"
#~ "li><li>If no extension is specified in the <b>%2</b> text area when you "
#~ "click <b>Save</b>, %3 will be added to the end of the filename (if the "
#~ "filename does not already exist). This extension is based on the file "
#~ "type that you have chosen to save in.<br /><br />If you do not want KDE "
#~ "to supply an extension for the filename, you can either turn this option "
#~ "off or you can suppress it by adding a period (.) to the end of the "
#~ "filename (the period will be automatically removed).</li></ol>If unsure, "
#~ "keep this option enabled as it makes your files more manageable."
#~ msgstr ""
#~ "此选项将在保存带扩展名的文件时启用某些便捷特性：<br /><ol><li>如果您更改了"
#~ "保存的文件类型，<b>%1</b> 文本区中指定的扩展名也会进行更新。<br/><br/></"
#~ "li><li>如果当您单击<b>保存</b>时，没有在 <b>%2</b> 文本区中指定扩展名，将"
#~ "会在文件名结尾处添加 %3(如果文件名不存在的话)。扩展名基于您所选的保存类"
#~ "型。<br/><br/>如果您不想让 KDE 为文件名提供扩展名，您可以关闭选项，或者在"
#~ "文件名末尾添加句号(.)(句号会被自动去掉)。</li></ol>如果不确定的话，请保持"
#~ "此选项有效，这样会使得您的文件更容易管理。"

#~ msgid ""
#~ "<qt>This button allows you to bookmark specific locations. Click on this "
#~ "button to open the bookmark menu where you may add, edit or select a "
#~ "bookmark.<br /><br />These bookmarks are specific to the file dialog, but "
#~ "otherwise operate like bookmarks elsewhere in KDE.</qt>"
#~ msgstr ""
#~ "<qt>此按钮允许您将指定位置加入书签。单击此按钮将打开书签菜单，其中您可以添"
#~ "加、编辑或选择书签。<br /><br />这些书签专用于文件对话框，但是可像 KDE 其"
#~ "它地方的书签一样操作。</qt>"

#~ msgid "Sorry"
#~ msgstr "抱歉"

#~ msgid "<qt>The template file <b>%1</b> does not exist.</qt>"
#~ msgstr "<qt>模板文件 <b>%1</b> 不存在。</qt>"

#~ msgctxt "@action:button"
#~ msgid "Create directory"
#~ msgstr "创建目录"

#~ msgctxt "@action:button"
#~ msgid "Enter a different name"
#~ msgstr "输入不同的名称"

#~ msgid "Create hidden directory?"
#~ msgstr "是否创建隐藏目录？"

#~ msgid ""
#~ "The name \"%1\" starts with a dot, so the directory will be hidden by "
#~ "default."
#~ msgstr "“%1”是一个以点号开头的名称，此目录默认会被隐藏。"

#~ msgid "Do not ask again"
#~ msgstr "不再询问"

#~ msgid "File name:"
#~ msgstr "文件名："

#~ msgid "Create Symlink"
#~ msgstr "创建符号链接"

#~ msgid "Create link to URL"
#~ msgstr "创建到 URL 的链接"

#~ msgctxt "@item:inmenu Create New"
#~ msgid "%1"
#~ msgstr "%1"

#~ msgid ""
#~ "Basic links can only point to local files or directories.\n"
#~ "Please use \"Link to Location\" for remote URLs."
#~ msgstr ""
#~ "基本链接只能链接到本地文件或目录。\n"
#~ "如果是远程地址(URL)，请使用“链接到地址”选项来操作。"

#~ msgid "Create New"
#~ msgstr "新建"

#~ msgid "Link to Device"
#~ msgstr "链接到设备"

#~ msgctxt "Default name for a new folder"
#~ msgid "New Folder"
#~ msgstr "新建文件夹"

#~ msgid ""
#~ "Create new folder in:\n"
#~ "%1"
#~ msgstr ""
#~ "创建新文件夹的位置：\n"
#~ "%1"

#~ msgid "Copy"
#~ msgstr "复制"

#~ msgid "Paste"
#~ msgstr "粘贴"

#~ msgid "Edit"
#~ msgstr "编辑"

#~ msgid "Navigate"
#~ msgstr "导航"

#~ msgid "Show Full Path"
#~ msgstr "显示完整路径"

#~ msgid "Custom Path"
#~ msgstr "自定义路径"

#~ msgctxt "@action:inmenu"
#~ msgid "More"
#~ msgstr "更多"

#~ msgctxt "@item:inmenu"
#~ msgid "Devices"
#~ msgstr "设备"

#~ msgctxt "@item:inmenu"
#~ msgid "Subversion"
#~ msgstr "Subversion"

#~ msgctxt "@item:inmenu"
#~ msgid "Other"
#~ msgstr "其它"

#~ msgid "Click for Location Navigation"
#~ msgstr "单击可进行位置导航"

#~ msgid "Click to Edit Location"
#~ msgstr "单击可编辑位置"

#~ msgid "Setting ACL for %1"
#~ msgstr "设置 %1 的 ACL"

#~ msgid ""
#~ "Could not change permissions for\n"
#~ "%1"
#~ msgstr ""
#~ "无法改变 %1\n"
#~ "的权限"

#~ msgid "No Media inserted or Media not recognized."
#~ msgstr "未插入介质，或介质不可识别。"

#~ msgid "\"vold\" is not running."
#~ msgstr "“vold”未运行。"

#~ msgid "Could not find program \"mount\""
#~ msgstr "找不到程序“mount”"

#~ msgid "mounting is not supported by wince."
#~ msgstr "Wince 平台还不支持挂载。"

#~ msgid "Could not find program \"umount\""
#~ msgstr "找不到程序“umount”"

#~ msgid "unmounting is not supported by wince."
#~ msgstr "Wince 平台还不支持卸载。"

#~ msgid "Cannot copy file from %1 to %2. (Errno: %3)"
#~ msgstr "无法将文件从 %1 复制到 %2。(错误号：%3)"

#~ msgid "No media in device for %1"
#~ msgstr "%1 设备中没有介质"

#~ msgid "Could not get user id for given user name %1"
#~ msgstr "无法获得给定用户名 %1 的用户 ID"

#~ msgid "Could not get group id for given group name %1"
#~ msgstr "无法获得给定组名 %1 的组 ID"

#~ msgid "Opening connection to host %1"
#~ msgstr "打开到主机 %1 的连接"

#~ msgid "Connected to host %1"
#~ msgstr "已连接到主机 %1"

#~ msgid ""
#~ "%1.\n"
#~ "\n"
#~ "Reason: %2"
#~ msgstr ""
#~ "%1。\n"
#~ "\n"
#~ "原因：%2"

#~ msgid "Sending login information"
#~ msgstr "发送登录信息"

#~ msgid ""
#~ "Message sent:\n"
#~ "Login using username=%1 and password=[hidden]\n"
#~ "\n"
#~ "Server replied:\n"
#~ "%2\n"
#~ "\n"
#~ msgstr ""
#~ "发送的消息：\n"
#~ "登录所用的用户名=%1，密码=[隐藏]\n"
#~ "\n"
#~ "服务器的回应：\n"
#~ "%2\n"
#~ "\n"

#~ msgid "You need to supply a username and a password to access this site."
#~ msgstr "您需要提供用户名和密码来访问这个站点。"

#~ msgid "Site:"
#~ msgstr "站点："

#~ msgid "<b>%1</b>"
#~ msgstr "<b>%1</b>"

#~ msgid "Login OK"
#~ msgstr "登录成功"

#~ msgid "Could not login to %1."
#~ msgstr "无法登录到 %1。"

#~ msgid ""
#~ "You need to supply a username and a password for the proxy server listed "
#~ "below before you are allowed to access any sites."
#~ msgstr "您需要为以下列出的代理服务器提供用户名和密码，才能够访问站点。"

#~ msgid "Proxy:"
#~ msgstr "代理："

#~ msgid "<b>%1</b> at <b>%2</b>"
#~ msgstr "<b>%1</b> 在 <b>%2</b>"

#~ msgid "Proxy Authentication Failed."
#~ msgstr "代理验证失败。"

#~ msgid "No host specified."
#~ msgstr "没有指定主机。"

#~ msgid "Otherwise, the request would have succeeded."
#~ msgstr "否则，该请求已经成功。"

#~ msgctxt "request type"
#~ msgid "retrieve property values"
#~ msgstr "获取属性值"

#~ msgctxt "request type"
#~ msgid "set property values"
#~ msgstr "设置属性值"

#~ msgctxt "request type"
#~ msgid "create the requested folder"
#~ msgstr "创建请求的文件夹"

#~ msgctxt "request type"
#~ msgid "copy the specified file or folder"
#~ msgstr "复制指定的文件或文件夹"

#~ msgctxt "request type"
#~ msgid "move the specified file or folder"
#~ msgstr "移动指定的文件或文件夹"

#~ msgctxt "request type"
#~ msgid "search in the specified folder"
#~ msgstr "在指定的文件夹中搜索"

#~ msgctxt "request type"
#~ msgid "lock the specified file or folder"
#~ msgstr "锁定指定的文件或文件夹"

#~ msgctxt "request type"
#~ msgid "unlock the specified file or folder"
#~ msgstr "解锁指定的文件或文件夹"

#~ msgctxt "request type"
#~ msgid "delete the specified file or folder"
#~ msgstr "删除指定的文件或文件夹"

#~ msgctxt "request type"
#~ msgid "query the server's capabilities"
#~ msgstr "查询服务器的能力"

#~ msgctxt "request type"
#~ msgid "retrieve the contents of the specified file or folder"
#~ msgstr "获取指定的文件或文件夹的内容"

#~ msgctxt "request type"
#~ msgid "run a report in the specified folder"
#~ msgstr "在指定的文件夹中运行报告"

#~ msgctxt "%1: code, %2: request type"
#~ msgid "An unexpected error (%1) occurred while attempting to %2."
#~ msgstr "试图%2时发生不可预料的错误(%1)。"

#~ msgid "The server does not support the WebDAV protocol."
#~ msgstr "服务器不支持 WebDAV 协议。"

#~ msgctxt "%1: request type, %2: url"
#~ msgid ""
#~ "An error occurred while attempting to %1, %2. A summary of the reasons is "
#~ "below."
#~ msgstr "试图%1 %2 时发生错误。原因摘要如下。"

#~ msgctxt "%1: request type"
#~ msgid "Access was denied while attempting to %1."
#~ msgstr "试图%1时访问被拒绝。"

#~ msgid ""
#~ "A resource cannot be created at the destination until one or more "
#~ "intermediate collections (folders) have been created."
#~ msgstr "在一个或多个中介集合(文件夹)被创建后才能够在目标处创建资源。"

#~ msgid ""
#~ "The server was unable to maintain the liveness of the properties listed "
#~ "in the propertybehavior XML element or you attempted to overwrite a file "
#~ "while requesting that files are not overwritten. %1"
#~ msgstr ""
#~ "服务器无法保持列举在“属性行为”XML 元素中的属性的活跃性，或者您试图覆盖某文"
#~ "件，同时又请求那些文件不被覆盖。%1"

#~ msgid "The requested lock could not be granted. %1"
#~ msgstr "请求的锁定无法被授予。%1"

#~ msgid "The server does not support the request type of the body."
#~ msgstr "服务器不支持内容中的请求类型。"

#~ msgctxt "%1: request type"
#~ msgid "Unable to %1 because the resource is locked."
#~ msgstr "无法%1，因为资源被锁定了。"

#~ msgid "This action was prevented by another error."
#~ msgstr "该动作被另外一个错误阻止。"

#~ msgctxt "%1: request type"
#~ msgid ""
#~ "Unable to %1 because the destination server refuses to accept the file or "
#~ "folder."
#~ msgstr "无法%1，因为目标服务器拒绝接收该文件或文件夹。"

#~ msgid ""
#~ "The destination resource does not have sufficient space to record the "
#~ "state of the resource after the execution of this method."
#~ msgstr "目标资源在该方法执行后没有足够的空间来记录资源的状态。"

#~ msgid "The resource cannot be deleted."
#~ msgstr "无法删除资源。"

#~ msgctxt "request type"
#~ msgid "upload %1"
#~ msgstr "上传%1"

#~ msgctxt "%1: response code, %2: request type"
#~ msgid "An unexpected error (%1) occurred while attempting to %2."
#~ msgstr "试图%2时发生未知的错误(%1)。"

#~ msgid "%1 contacted. Waiting for reply..."
#~ msgstr "已连接到 %1。正在等候响应..."

#~ msgctxt "@info Security check on url being accessed"
#~ msgid ""
#~ "<p>You are about to log in to the site \"%1\" with the username \"%2\", "
#~ "but the website does not require authentication. This may be an attempt "
#~ "to trick you.</p><p>Is \"%1\" the site you want to visit?</p>"
#~ msgstr ""
#~ "<p>您将要使用用户名\"%2\"登录到站点\"%1\"，但是网站并不要求进行验证。这可"
#~ "能是在尝试欺骗您。</p><p>\"%1\"是您想要访问的网站吗？</p>"

#~ msgctxt "@title:window"
#~ msgid "Confirm Website Access"
#~ msgstr "确认网站访问"

#~ msgid "Server processing request, please wait..."
#~ msgstr "服务器正在处理请求，请稍候..."

#~ msgid "Sending data to %1"
#~ msgstr "把数据发送到 %1"

#~ msgid "Retrieving %1 from %2..."
#~ msgstr "正在从 %2 中获取 %1..."

#~ msgid "Authentication Failed."
#~ msgstr "验证失败。"

#~ msgid "Authorization failed."
#~ msgstr "验证失败。"

#~ msgid "Unknown Authorization method."
#~ msgstr "未知的验证方法。"

#~ msgid "KDE HTTP cache maintenance tool"
#~ msgstr "KDE HTTP 缓存维护工具"

#~ msgid "Empty the cache"
#~ msgstr "清空缓存"

#~ msgid "Display information about cache file"
#~ msgstr "显示缓存文件的信息"

#~ msgid "Cookie Alert"
#~ msgstr "Cookie 警报"

#~ msgctxt "%2 hostname, %3 optional cross domain suffix (translated below)"
#~ msgid ""
#~ "<p>You received a cookie from<br/><b>%2%3</b><br/>Do you want to accept "
#~ "or reject this cookie?</p>"
#~ msgid_plural ""
#~ "<p>You received %1 cookies from<br/><b>%2%3</b><br/>Do you want to accept "
#~ "or reject these cookies?</p>"
#~ msgstr[0] ""
#~ "<p>您收到 %1 cookies，来自<br/><b>%2%3</b><br/>接受还是拒绝？</p>"

#~ msgctxt "@item:intext cross domain cookie"
#~ msgid " [Cross Domain]"
#~ msgstr "[跨域]"

#~ msgid "Apply Choice To"
#~ msgstr "将选择应用到"

#~ msgid "&Only this cookie"
#~ msgstr "仅这个 cookie(&O)"

#~ msgid "&Only these cookies"
#~ msgstr "仅这些 cookie(&O)"

#~ msgid ""
#~ "Select this option to only accept or reject this cookie. You will be "
#~ "prompted again if you receive another cookie."
#~ msgstr ""
#~ "使用该选项来接受或拒绝这个 cookie。在收到另外一个 cookie 时，您会被再次提"
#~ "示。"

#~ msgid "All cookies from this do&main"
#~ msgstr "来自此域的全部 cookie(&M)"

#~ msgid ""
#~ "Select this option to accept or reject all cookies from this site. "
#~ "Choosing this option will add a new policy for the site this cookie "
#~ "originated from. This policy will be permanent until you manually change "
#~ "it from the System Settings."
#~ msgstr ""
#~ "使用该选项来接受或拒绝来自这个网站的所有 cookie。选择该选项会给这个 "
#~ "cookie 的来源站点添加一个新策略。这个策略将一直保持，直到您在控制中心手工"
#~ "修改它。"

#~ msgid "All &cookies"
#~ msgstr "全部 &cookie"

#~ msgid ""
#~ "Select this option to accept/reject all cookies from anywhere. Choosing "
#~ "this option will change the global cookie policy for all cookies until "
#~ "you manually change it from the System Settings."
#~ msgstr ""
#~ "使用该选项来接受或拒绝来自任何地方的 cookie。选择该选项会修改控制中心的全"
#~ "局 cookie 设置，需要手动从系统设置修改。"

#~ msgid "&Accept"
#~ msgstr "接受(&A)"

#~ msgid "Accept for this &session"
#~ msgstr "此会话同意(&S)"

#~ msgid "Accept cookie(s) until the end of the current session"
#~ msgstr "在本会话结束前接受 cookie"

#~ msgid "&Reject"
#~ msgstr "拒绝(&R)"

#~ msgid "See or modify the cookie information"
#~ msgstr "显示或修改 cookie 信息"

#~ msgid "Cookie Details"
#~ msgstr "Cookie 细节"

#~ msgid "Value:"
#~ msgstr "值："

#~ msgid "Expires:"
#~ msgstr "过期时间："

#~ msgid "Path:"
#~ msgstr "路径："

#~ msgid "Domain:"
#~ msgstr "域："

#~ msgid "Exposure:"
#~ msgstr "过期："

#~ msgctxt "Next cookie"
#~ msgid "&Next >>"
#~ msgstr "下一个(&N) >>"

#~ msgid "Show details of the next cookie"
#~ msgstr "显示下一个 cookie 的细节"

#~ msgid "Not specified"
#~ msgstr "未指定"

#~ msgid "End of Session"
#~ msgstr "会话结束"

#~ msgid "Secure servers only"
#~ msgstr "只对安全服务器"

#~ msgid "Secure servers, page scripts"
#~ msgstr "安全服务器，页面脚本"

#~ msgid "Servers"
#~ msgstr "服务器"

#~ msgid "Servers, page scripts"
#~ msgstr "服务器，页面脚本"

#~ msgid "HTTP Cookie Daemon"
#~ msgstr "HTTP Cookie 守护程序"

#~ msgid "HTTP cookie daemon"
#~ msgstr "HTTP cookie 守护程序"

#~ msgid "Shut down cookie jar"
#~ msgstr "关闭 cookie jar"

#~ msgid "Remove cookies for domain"
#~ msgstr "删除域的全部 cookie"

#~ msgid "Remove all cookies"
#~ msgstr "删除全部 cookie"

#~ msgid "Reload configuration file"
#~ msgstr "重新载入配置文件"

#~ msgid "kio_metainfo"
#~ msgstr "kio_metainfo"

#~ msgid "No metainfo for %1"
#~ msgstr "没有 %1 的元信息"

#~ msgctxt "@label:textbox"
#~ msgid "Name:"
#~ msgstr "名称："

#~ msgctxt "@label:textbox"
#~ msgid "Location:"
#~ msgstr "位置："

#~ msgctxt "name of the container of all browser bookmarks"
#~ msgid "Bookmarks"
#~ msgstr "书签"

#~ msgid "Receiving corrupt data."
#~ msgstr "接收损坏的数据。"

#~ msgid "Owner"
#~ msgstr "所有者"

#~ msgid "Owning Group"
#~ msgstr "所属组"

#~ msgid "Others"
#~ msgstr "其它"

#~ msgid "Mask"
#~ msgstr "掩码"

#~ msgid "Named User"
#~ msgstr "命名用户"

#~ msgid "Named Group"
#~ msgstr "命名群组"

#~ msgid "Edit Entry..."
#~ msgstr "编辑项目..."

#~ msgid "Delete Entry"
#~ msgstr "删除项目"

#~ msgid " (Default)"
#~ msgstr " (默认)"

#~ msgid "Edit ACL Entry"
#~ msgstr "编辑 ACL 项目"

#~ msgid "Entry Type"
#~ msgstr "项类型"

#~ msgid "Default for new files in this folder"
#~ msgstr "此目录中新文件的默认值"

#~ msgid "Named user"
#~ msgstr "命名用户"

#~ msgid "Named group"
#~ msgstr "命名群组"

#~ msgid "User: "
#~ msgstr "用户："

#~ msgid "Group: "
#~ msgstr "群组："

#~ msgid "Type"
#~ msgstr "类型"

#~ msgid "Name"
#~ msgstr "名称"

#~ msgctxt "read permission"
#~ msgid "r"
#~ msgstr "r"

#~ msgctxt "write permission"
#~ msgid "w"
#~ msgstr "w"

#~ msgctxt "execute permission"
#~ msgid "x"
#~ msgstr "x"

#~ msgid "Effective"
#~ msgstr "生效"

#~ msgctxt "@label"
#~ msgid "Add Comment..."
#~ msgstr "添加注释..."

#~ msgctxt "@label"
#~ msgid "Change..."
#~ msgstr "更改..."

#~ msgctxt "@title:window"
#~ msgid "Change Comment"
#~ msgstr "更改注释"

#~ msgctxt "@title:window"
#~ msgid "Add Comment"
#~ msgstr "添加注释"

#~ msgid "Device name"
#~ msgstr "设备名"

#~ msgid "Encoding:"
#~ msgstr "编码："

#~ msgid "Open"
#~ msgstr "打开"

#~ msgid "Save As"
#~ msgstr "另存为"

#~ msgid "*|All files"
#~ msgstr "*|全部文件"

#~ msgctxt "@item:intable"
#~ msgid "%1 item"
#~ msgid_plural "%1 items"
#~ msgstr[0] "%1 项"

#~ msgctxt "@label"
#~ msgid "Comment"
#~ msgstr "备注"

#~ msgctxt "@label"
#~ msgid "Modified"
#~ msgstr "修改时间"

#~ msgctxt "@label"
#~ msgid "Owner"
#~ msgstr "所有者"

#~ msgctxt "@label"
#~ msgid "Permissions"
#~ msgstr "权限"

#~ msgctxt "@label"
#~ msgid "Rating"
#~ msgstr "评分"

#~ msgctxt "@label"
#~ msgid "Size"
#~ msgstr "大小"

#~ msgctxt "@label"
#~ msgid "Tags"
#~ msgstr "标记"

#~ msgctxt "@label"
#~ msgid "Total Size"
#~ msgstr "总大小"

#~ msgctxt "@label"
#~ msgid "Type"
#~ msgstr "类型"

#~ msgid "KFileMetaDataReader"
#~ msgstr "KFile 元数据读取器"

#~ msgid "KFileMetaDataReader can be used to read metadata from a file"
#~ msgstr "KFile 元数据读取器可用于从文件中读取元数据"

#~ msgid "(C) 2011, Peter Penz"
#~ msgstr "(C) 2011，Peter Penz"

#~ msgid "Peter Penz"
#~ msgstr "Peter Penz"

#~ msgid "Current maintainer"
#~ msgstr "当前维护者"

#~ msgid "Only the meta data that is part of the file is read"
#~ msgstr "只有文件一小部分中的元数据会被读取"

#~ msgid "List of URLs where the meta-data should be read from"
#~ msgstr "用于读取元数据的来源 URL 列表"

#~ msgid "<Error>"
#~ msgstr "<错误>"

#~ msgid "&Share"
#~ msgstr "共享(&S)"

#~ msgid "Only folders in your home folder can be shared."
#~ msgstr "仅可共享您主文件夹中的文件夹。"

#~ msgid "Not shared"
#~ msgstr "未共享"

#~ msgid "Shared"
#~ msgstr "已共享"

#~ msgid ""
#~ "Sharing this folder makes it available under Linux/UNIX (NFS) and Windows "
#~ "(Samba)."
#~ msgstr "共享此文件夹将使其可以在 Linux/UNIX(NFS) 和 Windows(Samba) 中访问。"

#~ msgid "You can also reconfigure file sharing authorization."
#~ msgstr "您还可以重新配置文件共享的授权。"

#~ msgid "Configure File Sharing..."
#~ msgstr "配置文件共享..."

#~ msgid ""
#~ "Error running 'filesharelist'. Check if installed and in $PATH or /usr/"
#~ "sbin."
#~ msgstr ""
#~ "运行“filesharelist”出错。请检查该程序是否已经安装并位于 $PATH 或 /usr/bin "
#~ "中。"

#~ msgid "You need to be authorized to share folders."
#~ msgstr "您需要被授权共享文件夹。"

#~ msgid "File sharing is disabled."
#~ msgstr "文件共享已禁用。"

#~ msgid "Sharing folder '%1' failed."
#~ msgstr "共享文件夹“%1”失败。"

#~ msgid ""
#~ "An error occurred while trying to share folder '%1'. Make sure that the "
#~ "Perl script 'fileshareset' is set suid root."
#~ msgstr ""
#~ "试图共享文件夹“%1”时发生了错误。请确定 Perl 脚本“fileshareset”已设置了 "
#~ "suid root。"

#~ msgid "Unsharing folder '%1' failed."
#~ msgstr "取消文件夹“%1”的共享失败。"

#~ msgid ""
#~ "An error occurred while trying to unshare folder '%1'. Make sure that the "
#~ "Perl script 'fileshareset' is set suid root."
#~ msgstr ""
#~ "试图取消文件夹“%1”的共享时发生了错误。请确定 Perl 脚本“fileshareset”已设置"
#~ "了 suid root。"

#~ msgid "Select Icon"
#~ msgstr "选择图标"

#~ msgid "Icon Source"
#~ msgstr "图标来源"

#~ msgid "S&ystem icons:"
#~ msgstr "系统图标(&Y)："

#~ msgid "O&ther icons:"
#~ msgstr "其它图标(&T)："

#~ msgid "&Browse..."
#~ msgstr "浏览(&B)..."

#~ msgid "&Search:"
#~ msgstr "搜索(&S)："

#~ msgid "Search interactively for icon names (e.g. folder)."
#~ msgstr "交互式搜索图标名称(如文件夹)。"

#~ msgid "Actions"
#~ msgstr "动作"

#~ msgid "Animations"
#~ msgstr "动画"

#~ msgid "Applications"
#~ msgstr "程序"

#~ msgid "Categories"
#~ msgstr "类别"

#~ msgid "Devices"
#~ msgstr "设备"

#~ msgid "Emblems"
#~ msgstr "徽标"

#~ msgid "Emotes"
#~ msgstr "表情"

#~ msgid "Filesystems"
#~ msgstr "文件系统"

#~ msgid "International"
#~ msgstr "国际"

#~ msgid "Mimetypes"
#~ msgstr "MIME 类型"

#~ msgid "Places"
#~ msgstr "位置"

#~ msgid "Status"
#~ msgstr "状态"

#~ msgid "*.png *.xpm *.svg *.svgz|Icon Files (*.png *.xpm *.svg *.svgz)"
#~ msgstr "*.png *.xpm *.svg *.svgz|图标文件(*.png *.xpm *.svg *.svgz)"

#~ msgctxt "@title:window"
#~ msgid "Configure Shown Data"
#~ msgstr "配置显示的数据"

#~ msgctxt "@label::textbox"
#~ msgid "Select which data should be shown:"
#~ msgstr "选择要显示的数据："

#~ msgctxt "@action:button"
#~ msgid "Configure..."
#~ msgstr "配置..."

#~ msgctxt "@title:tab"
#~ msgid "Information"
#~ msgstr "信息"

#~ msgctxt "@label creation date"
#~ msgid "Created"
#~ msgstr "创建时间"

#~ msgctxt "@label file content size"
#~ msgid "Size"
#~ msgstr "大小"

#~ msgctxt "@label file depends from"
#~ msgid "Depends"
#~ msgstr "依赖关系"

#~ msgctxt "@label"
#~ msgid "Description"
#~ msgstr "描述"

#~ msgctxt "@label Software used to generate content"
#~ msgid "Generator"
#~ msgstr "生成器"

#~ msgctxt ""
#~ "@label see http://www.semanticdesktop.org/ontologies/2007/01/19/"
#~ "nie#hasPart"
#~ msgid "Has Part"
#~ msgstr "包含"

#~ msgctxt ""
#~ "@label see http://www.semanticdesktop.org/ontologies/2007/01/19/"
#~ "nie#hasLogicalPart"
#~ msgid "Has Logical Part"
#~ msgstr "具有逻辑部分"

#~ msgctxt "@label parent directory"
#~ msgid "Part of"
#~ msgstr "父文件夹"

#~ msgctxt "@label"
#~ msgid "Keyword"
#~ msgstr "关键字"

#~ msgctxt "@label modified date of file"
#~ msgid "Modified"
#~ msgstr "修改时间"

#~ msgctxt "@label"
#~ msgid "MIME Type"
#~ msgstr "MIME 类型"

#~ msgctxt "@label"
#~ msgid "Content"
#~ msgstr "内容"

#~ msgctxt "@label"
#~ msgid "Related To"
#~ msgstr "相关"

#~ msgctxt "@label"
#~ msgid "Subject"
#~ msgstr "主题"

#~ msgctxt "@label music title"
#~ msgid "Title"
#~ msgstr "标题"

#~ msgctxt "@label file URL"
#~ msgid "Location"
#~ msgstr "位置"

#~ msgctxt "@label"
#~ msgid "Creator"
#~ msgstr "创建者"

#~ msgctxt "@label"
#~ msgid "Average Bitrate"
#~ msgstr "平均比特率"

#~ msgctxt "@label"
#~ msgid "Channels"
#~ msgstr "声道"

#~ msgctxt "@label number of characters"
#~ msgid "Characters"
#~ msgstr "字符"

#~ msgctxt "@label"
#~ msgid "Codec"
#~ msgstr "解码器"

#~ msgctxt "@label"
#~ msgid "Color Depth"
#~ msgstr "色深"

#~ msgctxt "@label"
#~ msgid "Duration"
#~ msgstr "时长"

#~ msgctxt "@label"
#~ msgid "Filename"
#~ msgstr "文件名"

#~ msgctxt "@label"
#~ msgid "Hash"
#~ msgstr "哈希"

#~ msgctxt "@label"
#~ msgid "Height"
#~ msgstr "高度"

#~ msgctxt "@label"
#~ msgid "Interlace Mode"
#~ msgstr "插值模式"

#~ msgctxt "@label number of lines"
#~ msgid "Lines"
#~ msgstr "行数"

#~ msgctxt "@label"
#~ msgid "Programming Language"
#~ msgstr "编程语言"

#~ msgctxt "@label"
#~ msgid "Sample Rate"
#~ msgstr "采样率"

#~ msgctxt "@label"
#~ msgid "Width"
#~ msgstr "宽度"

#~ msgctxt "@label number of words"
#~ msgid "Words"
#~ msgstr "单词数"

#~ msgctxt "@label EXIF aperture value"
#~ msgid "Aperture"
#~ msgstr "孔径"

#~ msgctxt "@label EXIF"
#~ msgid "Exposure Bias Value"
#~ msgstr "曝光补偿值"

#~ msgctxt "@label EXIF"
#~ msgid "Exposure Time"
#~ msgstr "曝光时长"

#~ msgctxt "@label EXIF"
#~ msgid "Flash"
#~ msgstr "闪光灯"

#~ msgctxt "@label EXIF"
#~ msgid "Focal Length"
#~ msgstr "焦距"

#~ msgctxt "@label EXIF"
#~ msgid "Focal Length 35 mm"
#~ msgstr "焦距长度 35 毫米"

#~ msgctxt "@label EXIF"
#~ msgid "ISO Speed Ratings"
#~ msgstr "ISO 速率"

#~ msgctxt "@label EXIF"
#~ msgid "Make"
#~ msgstr "制造商"

#~ msgctxt "@label EXIF"
#~ msgid "Metering Mode"
#~ msgstr "测距模式"

#~ msgctxt "@label EXIF"
#~ msgid "Model"
#~ msgstr "型号"

#~ msgctxt "@label EXIF"
#~ msgid "Orientation"
#~ msgstr "方向"

#~ msgctxt "@label EXIF"
#~ msgid "White Balance"
#~ msgstr "白平衡"

#~ msgctxt "@label video director"
#~ msgid "Director"
#~ msgstr "导演"

#~ msgctxt "@label music genre"
#~ msgid "Genre"
#~ msgstr "流派"

#~ msgctxt "@label music album"
#~ msgid "Album"
#~ msgstr "专辑"

#~ msgctxt "@label"
#~ msgid "Performer"
#~ msgstr "演绎者"

#~ msgctxt "@label"
#~ msgid "Release Date"
#~ msgstr "发布日期"

#~ msgctxt "@label music track number"
#~ msgid "Track"
#~ msgstr "音轨"

#~ msgctxt "@label resource created time"
#~ msgid "Resource Created"
#~ msgstr "资源创建时间"

#~ msgctxt "@label"
#~ msgid "Sub Resource"
#~ msgstr "子资源"

#~ msgctxt "@label resource last modified"
#~ msgid "Resource Modified"
#~ msgstr "资源修改时间"

#~ msgctxt "@label"
#~ msgid "Numeric Rating"
#~ msgstr "评分"

#~ msgctxt "@label"
#~ msgid "Copied From"
#~ msgstr "复制于"

#~ msgctxt "@label"
#~ msgid "First Usage"
#~ msgstr "首次使用"

#~ msgctxt "@label"
#~ msgid "Last Usage"
#~ msgstr "下次使用"

#~ msgctxt "@label"
#~ msgid "Usage Count"
#~ msgstr "使用次数"

#~ msgctxt "@label"
#~ msgid "Unix File Group"
#~ msgstr "Unix 文件群组"

#~ msgctxt "@label"
#~ msgid "Unix File Mode"
#~ msgstr "Unix 文件模式"

#~ msgctxt "@label"
#~ msgid "Unix File Owner"
#~ msgstr "Unix 文件属主"

#~ msgctxt "@label file type"
#~ msgid "Type"
#~ msgstr "类型"

#~ msgctxt "@label Number of fuzzy translations"
#~ msgid "Fuzzy Translations"
#~ msgstr "模糊翻译"

#~ msgctxt "@label Name of last translator"
#~ msgid "Last Translator"
#~ msgstr "最后翻译者"

#~ msgctxt "@label Number of obsolete translations"
#~ msgid "Obsolete Translations"
#~ msgstr "废弃翻译"

#~ msgctxt "@label"
#~ msgid "Translation Source Date"
#~ msgstr "翻译来源日期"

#~ msgctxt "@label Number of total translations"
#~ msgid "Total Translations"
#~ msgstr "总共翻译"

#~ msgctxt "@label Number of translated strings"
#~ msgid "Translated"
#~ msgstr "已翻译"

#~ msgctxt "@label"
#~ msgid "Translation Date"
#~ msgstr "翻译日期"

#~ msgctxt "@label Number of untranslated strings"
#~ msgid "Untranslated"
#~ msgstr "未翻译"

#~ msgid "Known Applications"
#~ msgstr "已知程序"

#~ msgid "Open With"
#~ msgstr "打开方式"

#~ msgid ""
#~ "<qt>Select the program that should be used to open <b>%1</b>. If the "
#~ "program is not listed, enter the name or click the browse button.</qt>"
#~ msgstr ""
#~ "<qt>选择用来打开 <b>%1</b> 的程序。如果程序未列出，输入程序名称或单击浏览"
#~ "按钮。</qt>"

#~ msgid ""
#~ "Choose the name of the program with which to open the selected files."
#~ msgstr "选择用来打开文件的程序名。"

#~ msgid "Choose Application for %1"
#~ msgstr "选择用于 %1 的程序"

#~ msgid ""
#~ "<qt>Select the program for the file type: <b>%1</b>. If the program is "
#~ "not listed, enter the name or click the browse button.</qt>"
#~ msgstr ""
#~ "<qt>选择打开文件类型<b>%1</b>使用的程序。如果要使用的程序没有列出，输入程"
#~ "序名称或单击浏览按钮。</qt>"

#~ msgid "Choose Application"
#~ msgstr "选择应用程序"

#~ msgid ""
#~ "<qt>Select a program. If the program is not listed, enter the name or "
#~ "click the browse button.</qt>"
#~ msgstr ""
#~ "<qt>选择程序。如果要使用的程序没有列出，输入程序名称或单击浏览按钮。</qt>"

#~ msgid ""
#~ "Following the command, you can have several place holders which will be "
#~ "replaced with the actual values when the actual program is run:\n"
#~ "%f - a single file name\n"
#~ "%F - a list of files; use for applications that can open several local "
#~ "files at once\n"
#~ "%u - a single URL\n"
#~ "%U - a list of URLs\n"
#~ "%d - the directory of the file to open\n"
#~ "%D - a list of directories\n"
#~ "%i - the icon\n"
#~ "%m - the mini-icon\n"
#~ "%c - the comment"
#~ msgstr ""
#~ "您可以在命令后面跟上几个占位符，程序运行时这些占位符将会替换为实际的值：\n"
#~ "%f - 单个文件名\n"
#~ "%F - 文件列表；用于可同时打开多个本地文件的应用程序\n"
#~ "%u - 单个 URL\n"
#~ "%U - URL 列表\n"
#~ "%d - 要打开的文件所在目录\n"
#~ "%D - 目录列表\n"
#~ "%i - 图标\n"
#~ "%m - 小图标\n"
#~ "%c - 注释"

#~ msgid "Run in &terminal"
#~ msgstr "在终端中运行(&T)"

#~ msgid "&Do not close when command exits"
#~ msgstr "命令退出时不关闭(&D)"

#~ msgid "&Remember application association for this type of file"
#~ msgstr "记住该文件类型的应用程序关联(&R)"

#~ msgid ""
#~ "Could not extract executable name from '%1', please type a valid program "
#~ "name."
#~ msgstr "无法从“%1”展开可执行文件名，请输入一个有效的程序名。"

#~ msgid "'%1' not found, please type a valid program name."
#~ msgstr "找不到“%1”，请输入一个有效的程序名。"

#~ msgid "P&review"
#~ msgstr "预览(&R)"

#~ msgctxt ""
#~ "@title:group Title of a group that lets the user choose options about the "
#~ "terminal when launching a program"
#~ msgid "Terminal"
#~ msgstr "终端"

#~ msgid ""
#~ "Check this option if the application you want to run is a text mode "
#~ "application or if you want the information that is provided by the "
#~ "terminal emulator window."
#~ msgstr ""
#~ "如果您想要运行的应用程序是文本模式应用程序，或者您需要的信息由终端模拟窗口"
#~ "所提供，请选中此选项。"

#~ msgid "&Run in terminal"
#~ msgstr "在终端中运行(&R)"

#~ msgid "&Terminal options:"
#~ msgstr "终端选项(&T)："

#~ msgid ""
#~ "Check this option if the text mode application offers relevant "
#~ "information on exit. Keeping the terminal emulator open allows you to "
#~ "retrieve this information."
#~ msgstr ""
#~ "如果文本模式应用程序在退出时提供相关信息，请选中此选项。保持终端模拟器打开"
#~ "可允许您获取此信息。"

#~ msgid "Do not &close when command exits"
#~ msgstr "命令退出时不关闭(&C)"

#~ msgctxt ""
#~ "@title:group Title of a group that lets the user choose which user to use "
#~ "when launching a program"
#~ msgid "User"
#~ msgstr "用户"

#~ msgid ""
#~ "Check this option if you want to run this application with a different "
#~ "user id. Every process has a different user id associated with it. This "
#~ "id code determines file access and other permissions. The password of the "
#~ "user is required to use this option."
#~ msgstr ""
#~ "如果您想要以不同的用户 ID 运行此应用程序，请选中此选项。每个进程都有与其关"
#~ "联的不同的用户 ID。此 ID 代码决定了文件访问和其它权限。需要提供该用户的密"
#~ "码才可以使用此选项。"

#~ msgid "Ru&n as a different user"
#~ msgstr "以不同的用户运行(&N)"

#~ msgid "Enter the user name you want to run the application as."
#~ msgstr "输入您想要以何用户名的身份运行此应用程序。"

#~ msgid "&Username:"
#~ msgstr "用户名(&U)："

#~ msgid "Enter the user name you want to run the application as here."
#~ msgstr "在此输入您想要以何用户名的身份运行此应用程序。"

#~ msgctxt ""
#~ "@title:group Title of a group that lets the user choose options regargin "
#~ "program startup"
#~ msgid "Startup"
#~ msgstr "启动"

#~ msgid ""
#~ "Check this option if you want to make clear that your application has "
#~ "started. This visual feedback may appear as a busy cursor or in the "
#~ "taskbar."
#~ msgstr ""
#~ "如果您想要更清楚地了解您应用程序的启动过程，请选中此选项。此视觉反馈可能显"
#~ "示为忙光标，也可能在任务栏中有所体现。"

#~ msgid "Enable &launch feedback"
#~ msgstr "启用执行反馈(&L)"

#~ msgid ""
#~ "Check this option if you want to have a system tray handle for your "
#~ "application."
#~ msgstr "如果您想要为您的应用程序提供系统托盘句柄，请选中此选项。"

#~ msgid "&Place in system tray"
#~ msgstr "放在系统托盘中(&P)"

#~ msgid "&D-Bus registration:"
#~ msgstr "&D-Bus 注册："

#~ msgid "None"
#~ msgstr "无"

#~ msgid "Multiple Instances"
#~ msgstr "多实例"

#~ msgid "Single Instance"
#~ msgstr "单实例"

#~ msgid "Run Until Finished"
#~ msgstr "运行至完成"

#~ msgid ""
#~ "Type the name you want to give to this application here. This application "
#~ "will appear under this name in the applications menu and in the panel."
#~ msgstr ""
#~ "在此输入您想要为此应用程序起的名字。此应用程序将以此名称出现在应用程序菜单"
#~ "和面板中。"

#~ msgid ""
#~ "Type the description of this application, based on its use, here. "
#~ "Examples: a dial up application (KPPP) would be \"Dial up tool\"."
#~ msgstr ""
#~ "在此根据用途输入此应用程序的描述。例如：拨号应用程序(KPPP)可能是“拨号工"
#~ "具”。"

#~ msgid "&Description:"
#~ msgstr "描述(&D)："

#~ msgid "Type any comment you think is useful here."
#~ msgstr "在此输入您认为有用的注释。"

#~ msgid "Comm&ent:"
#~ msgstr "注释(&E)："

#~ msgid ""
#~ "Type the command to start this application here.\n"
#~ "\n"
#~ "Following the command, you can have several place holders which will be "
#~ "replaced with the actual values when the actual program is run:\n"
#~ "%f - a single file name\n"
#~ "%F - a list of files; use for applications that can open several local "
#~ "files at once\n"
#~ "%u - a single URL\n"
#~ "%U - a list of URLs\n"
#~ "%d - the directory of the file to open\n"
#~ "%D - a list of directories\n"
#~ "%i - the icon\n"
#~ "%m - the mini-icon\n"
#~ "%c - the caption"
#~ msgstr ""
#~ "在此输入启动此应用程序的命令。\n"
#~ "\n"
#~ "在命令之后，您可以使用某些占位符，在程序实际运行时这些占位符将被替换为实际"
#~ "值：\n"
#~ "%f - 单个文件名\n"
#~ "%F - 文件列表；用于可一次打开多个本地文件的应用程序\n"
#~ "%u - 单个 URL\n"
#~ "%U - URL 列表\n"
#~ "%d - 要打开文件的目录\n"
#~ "%D - 目录列表\n"
#~ "%i - 图标\n"
#~ "%m - 小图标\n"
#~ "%c - 标题"

#~ msgid "Co&mmand:"
#~ msgstr "命令(&M)："

#~ msgid ""
#~ "Click here to browse your file system in order to find the desired "
#~ "executable."
#~ msgstr "单击此处可在您的文件系统中浏览，以便找到想要的可执行文件。"

#~ msgid "Sets the working directory for your application."
#~ msgstr "设置您应用程序的工作目录。"

#~ msgid "&Work path:"
#~ msgstr "工作路径(&W)："

#~ msgid ""
#~ "<qt><p>This list should show the types of file that your application can "
#~ "handle. This list is organized by <u>mimetypes</u>.</p>\n"
#~ "<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol "
#~ "for identifying the type of data based on filename extensions and "
#~ "correspondent <u>mimetypes</u>. Example: the \"bmp\" part that comes "
#~ "after the dot in flower.bmp indicates that it is a specific kind of "
#~ "image, <u>image/x-bmp</u>. To know which application should open each "
#~ "type of file, the system should be informed about the abilities of each "
#~ "application to handle these extensions and mimetypes.</p>\n"
#~ "<p>If you want to associate this application with one or more mimetypes "
#~ "that are not in this list, click on the button <b>Add</b> below. If there "
#~ "are one or more filetypes that this application cannot handle, you may "
#~ "want to remove them from the list clicking on the button <b>Remove</b> "
#~ "below.</p></qt>"
#~ msgstr ""
#~ "<qt><p>在此选择您的应用程序可处理的一种或多种文件类型。此列表是按照 "
#~ "<u>MIME 类型</u>组织的。</p>\n"
#~ "<p>MIME——多用途网际邮件扩展——是一种用来根据文件扩展名和相应的 <u>MIME 类型"
#~ "</u>来标识数据类型的标准协议。例如：flower.bmp 中句点后面的“bmp”部分表明了"
#~ "这是一种图像 <u>image/x-bmp</u>。要哪个应用程序应该打开哪种类型的文件，您"
#~ "系统通知系统每个应用程序可处理哪些扩展名和 MIME 类型。</p>\n"
#~ "<p>如果您想要将此应用程序与一种或多种未在列表中出现的 MIME 类型关联起来，"
#~ "请单击下面的<b>添加</b>按钮。如果此应用程序有一种或多种文件类型，您可以使"
#~ "用下面的<b>删除</b>按钮从列表中予以删除。</p></qt>"

#~ msgid "&Supported file types:"
#~ msgstr "支持的 MIME 类型(&S)："

#~ msgid "Mimetype"
#~ msgstr "MIME 类型"

#~ msgid "Description"
#~ msgstr "描述"

#~ msgid ""
#~ "Click on this button if you want to add a type of file (mimetype) that "
#~ "your application can handle."
#~ msgstr "如果您想要为您的应用程序可处理的文件类型(MIME 类型)，请单击此按钮。"

#~ msgid "Add..."
#~ msgstr "添加..."

#~ msgid ""
#~ "If you want to remove a type of file (mimetype) that your application "
#~ "cannot handle, select the mimetype in the list above and click on this "
#~ "button."
#~ msgstr ""
#~ "如果您想要删除某种您应用程序无法处理的文件类型(MIME 类型)，请在上面的列表"
#~ "中选择该 MIME 类型，然后单击此按钮。"

#~ msgid "Remove"
#~ msgstr "删除"

#~ msgid ""
#~ "Click here to modify the way this application will run, launch feedback, "
#~ "D-Bus options or to run it as a different user."
#~ msgstr ""
#~ "单击此处修改应用程序运行的方式，执行反馈，D-Bus 选项或者以不同的用户运行。"

#~ msgid "Ad&vanced Options"
#~ msgstr "高级选项(&V)"

#~ msgid "Properties for %1"
#~ msgstr "%1 的属性"

#~ msgid "Properties for 1 item"
#~ msgid_plural "Properties for %1 Selected Items"
#~ msgstr[0] "%1 个选中项的属性"

#~ msgctxt "@title:tab File properties"
#~ msgid "&General"
#~ msgstr "常规(&G)"

#~ msgid "Type:"
#~ msgstr "类型："

#~ msgid "Create New File Type"
#~ msgstr "创建新的文件类型"

#~ msgid "File Type Options"
#~ msgstr "文件类型选项"

#~ msgid "Contents:"
#~ msgstr "内容："

#~ msgid "Size:"
#~ msgstr "大小："

#~ msgid "Calculate"
#~ msgstr "计算"

#~ msgid "Stop"
#~ msgstr "停止"

#~ msgid "Refresh"
#~ msgstr "刷新"

#~ msgid "Points to:"
#~ msgstr "指向："

#~ msgid "Created:"
#~ msgstr "创建时间："

#~ msgid "Modified:"
#~ msgstr "修改时间："

#~ msgid "Accessed:"
#~ msgstr "访问时间："

#~ msgid "Mounted on:"
#~ msgstr "挂载点："

#~ msgid "Device usage:"
#~ msgstr "设备使用率："

#~ msgctxt "Available space out of total partition size (percent used)"
#~ msgid "%1 free of %2 (%3% used)"
#~ msgstr "共 %2，剩余 %1(已用 %3%)"

#~ msgid ""
#~ "Calculating... %1 (%2)\n"
#~ "%3, %4"
#~ msgstr ""
#~ "正在计算...%1 (%2)\n"
#~ "%3，%4"

#~ msgid "1 file"
#~ msgid_plural "%1 files"
#~ msgstr[0] "%1 个文件"

#~ msgid "1 sub-folder"
#~ msgid_plural "%1 sub-folders"
#~ msgstr[0] "%1 个子文件夹"

#~ msgid "Calculating..."
#~ msgstr "正在计算..."

#~ msgid "At least %1"
#~ msgstr "至少 %1"

#~ msgid "The new file name is empty."
#~ msgstr "新文件名称为空。"

#~ msgid ""
#~ "<qt>Could not save properties. You do not have sufficient access to write "
#~ "to <b>%1</b>.</qt>"
#~ msgstr "<qt>无法保存属性。您没有写入 <b>%1</b> 的足够权限。</qt>"

#~ msgid "Forbidden"
#~ msgstr "禁止"

#~ msgid "Can Read"
#~ msgstr "可读"

#~ msgid "Can Read & Write"
#~ msgstr "可读写"

#~ msgid "Can View Content"
#~ msgstr "可查看内容"

#~ msgid "Can View & Modify Content"
#~ msgstr "可查看并修改内容"

#~ msgid "Can View Content & Read"
#~ msgstr "可查看内容并读取"

#~ msgid "Can View/Read & Modify/Write"
#~ msgstr "可查看/读取并修改/写入内容"

#~ msgid "&Permissions"
#~ msgstr "权限(&P)"

#~ msgid "Access Permissions"
#~ msgstr "访问权限"

#~ msgid "This file is a link and does not have permissions."
#~ msgid_plural "All files are links and do not have permissions."
#~ msgstr[0] "文件为链接，且没有权限。"

#~ msgid "Only the owner can change permissions."
#~ msgstr "只有所有者可以更改权限。"

#~ msgid "O&wner:"
#~ msgstr "所有者(&W)："

#~ msgid "Specifies the actions that the owner is allowed to do."
#~ msgstr "指定允许所有者执行的操作。"

#~ msgid "Gro&up:"
#~ msgstr "群组(&U)："

#~ msgid ""
#~ "Specifies the actions that the members of the group are allowed to do."
#~ msgstr "指定允许同组用户执行的操作。"

#~ msgid "O&thers:"
#~ msgstr "其他(&T)："

#~ msgid ""
#~ "Specifies the actions that all users, who are neither owner nor in the "
#~ "group, are allowed to do."
#~ msgstr "指定既非所有者也非同组者的其他用户可执行的操作。"

#~ msgid "Only own&er can rename and delete folder content"
#~ msgstr "只有所有者可以重命名并删除文件夹内容(&E)"

#~ msgid "Is &executable"
#~ msgstr "可执行(&E)"

#~ msgid ""
#~ "Enable this option to allow only the folder's owner to delete or rename "
#~ "the contained files and folders. Other users can only add new files, "
#~ "which requires the 'Modify Content' permission."
#~ msgstr ""
#~ "启用此选项，将允许文件夹属主删除或重命名文件和文件夹。其他用户在设置了“修"
#~ "改内容”权限的情况下，可以添加新文件。"

#~ msgid ""
#~ "Enable this option to mark the file as executable. This only makes sense "
#~ "for programs and scripts. It is required when you want to execute them."
#~ msgstr ""
#~ "启用此选项，可将此文件标为可执行。这只对程序和脚本。如果您想要执行此文件的"
#~ "话，则需要选中此项。"

#~ msgid "A&dvanced Permissions"
#~ msgstr "高级权限(&D)"

#~ msgid "Ownership"
#~ msgstr "所有者"

#~ msgid "User:"
#~ msgstr "用户："

#~ msgid "Group:"
#~ msgstr "群组："

#~ msgid "Apply changes to all subfolders and their contents"
#~ msgstr "将更改应用到所有的子文件夹和其中的文件"

#~ msgid "Advanced Permissions"
#~ msgstr "高级权限"

#~ msgid "Class"
#~ msgstr "类"

#~ msgid ""
#~ "Show\n"
#~ "Entries"
#~ msgstr ""
#~ "显示\n"
#~ "项目"

#~ msgid "Read"
#~ msgstr "读取"

#~ msgid "This flag allows viewing the content of the folder."
#~ msgstr "此标志允许查看文件夹的内容。"

#~ msgid "The Read flag allows viewing the content of the file."
#~ msgstr "读取标志允许查看文件的内容。"

#~ msgid ""
#~ "Write\n"
#~ "Entries"
#~ msgstr ""
#~ "写入\n"
#~ "项目"

#~ msgid "Write"
#~ msgstr "写入"

#~ msgid ""
#~ "This flag allows adding, renaming and deleting of files. Note that "
#~ "deleting and renaming can be limited using the Sticky flag."
#~ msgstr ""
#~ "此标志允许添加、重命名和删除文件。请注意，删除和重命名可以使用粘性标志加以"
#~ "限制。"

#~ msgid "The Write flag allows modifying the content of the file."
#~ msgstr "写入标志允许修改文件内容。"

#~ msgctxt "Enter folder"
#~ msgid "Enter"
#~ msgstr "进入"

#~ msgid "Enable this flag to allow entering the folder."
#~ msgstr "启用此标志以允许进入文件夹。"

#~ msgid "Exec"
#~ msgstr "执行"

#~ msgid "Enable this flag to allow executing the file as a program."
#~ msgstr "启用此标志，可以将文件以程序方式执行。"

#~ msgid "Special"
#~ msgstr "特殊"

#~ msgid ""
#~ "Special flag. Valid for the whole folder, the exact meaning of the flag "
#~ "can be seen in the right hand column."
#~ msgstr ""
#~ "特殊标志。只对整个文件夹有效，您可在右手列中查看每个标志的具体含义。"

#~ msgid ""
#~ "Special flag. The exact meaning of the flag can be seen in the right hand "
#~ "column."
#~ msgstr "特殊标志。您可在右手列中查看每个标志的具体含义。"

#~ msgid "User"
#~ msgstr "用户"

#~ msgid "Group"
#~ msgstr "群组"

#~ msgid "Set UID"
#~ msgstr "设置 UID"

#~ msgid ""
#~ "If this flag is set, the owner of this folder will be the owner of all "
#~ "new files."
#~ msgstr "如果设置了此标志，此文件夹的所有者也将是全部新文件的所有者。"

#~ msgid ""
#~ "If this file is an executable and the flag is set, it will be executed "
#~ "with the permissions of the owner."
#~ msgstr "如果此文件可执行且设置了此标志，该文件将会以所有者的权限加以运行。"

#~ msgid "Set GID"
#~ msgstr "设置 GID"

#~ msgid ""
#~ "If this flag is set, the group of this folder will be set for all new "
#~ "files."
#~ msgstr "如果设置了此标志，此文件夹的群组将会设置为全部新文件的群组。"

#~ msgid ""
#~ "If this file is an executable and the flag is set, it will be executed "
#~ "with the permissions of the group."
#~ msgstr "如果此文件可执行且设置了此标志，该文件将会以群组的权限加以运行。"

#~ msgctxt "File permission"
#~ msgid "Sticky"
#~ msgstr "粘性"

#~ msgid ""
#~ "If the Sticky flag is set on a folder, only the owner and root can delete "
#~ "or rename files. Otherwise everybody with write permissions can do this."
#~ msgstr ""
#~ "如果在文件夹上设置了粘性标志，则只有所有者和 root 可以删除或重命名文件。否"
#~ "则，拥有写入权限的每个人都可以删除或重命名文件。"

#~ msgid ""
#~ "The Sticky flag on a file is ignored on Linux, but may be used on some "
#~ "systems"
#~ msgstr "文件上的粘性标志在 Linux 下被忽略，但可能在其它系统尚有用"

#~ msgid "Link"
#~ msgstr "链接"

#~ msgid "Varying (No Change)"
#~ msgstr "多种情况(无更改)"

#~ msgid "This file uses advanced permissions"
#~ msgid_plural "These files use advanced permissions."
#~ msgstr[0] "文件使用了高级权限。"

#~ msgid "This folder uses advanced permissions."
#~ msgid_plural "These folders use advanced permissions."
#~ msgstr[0] "文件夹使用了高级权限。"

#~ msgid "These files use advanced permissions."
#~ msgstr "这些文件使用了高级权限。"

#~ msgid "U&RL"
#~ msgstr "U&RL"

#~ msgid "URL:"
#~ msgstr "URL："

#~ msgid "De&vice"
#~ msgstr "设备(&V)"

#~ msgid "Device (/dev/fd0):"
#~ msgstr "设备 (/dev/fd0)："

#~ msgid "Device:"
#~ msgstr "设备："

#~ msgid "Read only"
#~ msgstr "只读"

#~ msgid "File system:"
#~ msgstr "文件系统："

#~ msgid "Mount point (/mnt/floppy):"
#~ msgstr "挂载点 (/mnt/floppy)："

#~ msgid "Mount point:"
#~ msgstr "挂载点："

#~ msgid "&Application"
#~ msgstr "应用程序(&A)"

#~ msgid "Add File Type for %1"
#~ msgstr "为 %1 添加文件类型"

#~ msgid "Select one or more file types to add:"
#~ msgstr "选择要添加的一个或多个文件类型："

#~ msgid "Only executables on local file systems are supported."
#~ msgstr "只支持本地文件系统上的可执行文件。"

#~ msgid "Advanced Options for %1"
#~ msgstr "%1 的高级选项"

#~ msgid "Open file dialog"
#~ msgstr "打开文件对话框"

#~ msgid "Blocked request."
#~ msgstr "已屏蔽的请求。"

#~ msgid "Unknown HTTP verb."
#~ msgstr "未知 HTTP 动作。"

#~ msgid ""
#~ "<qt>Could not modify the ownership of file <b>%1</b>. You have "
#~ "insufficient access to the file to perform the change.</qt>"
#~ msgstr ""
#~ "<qt>无法修改文件 <b>%1</b> 的所有者。您没有足够的权限来进行修改。</qt>"

#~ msgid "&Skip File"
#~ msgstr "跳过文件(&S)"

#~ msgid "Unable to create io-slave: %1"
#~ msgstr "无法创建输入输出后端：%1"

#~ msgid "Folder Already Exists"
#~ msgstr "文件夹已存在"

#~ msgid "File Already Exists"
#~ msgstr "文件已存在"

#~ msgid "Already Exists as Folder"
#~ msgstr "已经存在一个同名文件夹"

#~ msgid "Creating directory"
#~ msgstr "创建目录中"

#~ msgid "Directory"
#~ msgstr "目录"

#~ msgid "Moving"
#~ msgstr "移动中"

#~ msgctxt "The source of a file operation"
#~ msgid "Source"
#~ msgstr "源"

#~ msgctxt "The destination of a file operation"
#~ msgid "Destination"
#~ msgstr "目的"

#~ msgid "Deleting"
#~ msgstr "删除中"

#~ msgid "File"
#~ msgstr "文件"

#~ msgid "Und&o"
#~ msgstr "撤消(&O)"

#~ msgid "Und&o: Copy"
#~ msgstr "撤消：复制(&O)"

#~ msgid "Und&o: Link"
#~ msgstr "撤消：链接(&O)"

#~ msgid "Und&o: Move"
#~ msgstr "撤消：移动(&O)"

#~ msgid "Und&o: Rename"
#~ msgstr "撤消：重命名(&O)"

#~ msgid "Und&o: Trash"
#~ msgstr "撤消：移至回收站(&O)"

#~ msgid "Und&o: Create Folder"
#~ msgstr "撤消：创建文件夹(&O)"

#~ msgid "Und&o: Create File"
#~ msgstr "撤消：创建文件(&O)"

#~ msgid ""
#~ "The file %1 was copied from %2, but since then it has apparently been "
#~ "modified at %3.\n"
#~ "Undoing the copy will delete the file, and all modifications will be "
#~ "lost.\n"
#~ "Are you sure you want to delete %4?"
#~ msgstr ""
#~ "文件 %1 复制自 %2，不过它似乎已于 %3 时被修改过。\n"
#~ "撤消复制操作将会删除该文件，所有的修改都将丢失。\n"
#~ "您确认要删除 %4 吗？"

#~ msgid "Undo File Copy Confirmation"
#~ msgstr "确认撤消文件复制"

#~ msgid "1 day %2"
#~ msgid_plural "%1 days %2"
#~ msgstr[0] "%1 天 %2"

#~ msgid "%1 Item"
#~ msgid_plural "%1 Items"
#~ msgstr[0] "%1 项"

#~ msgid "1 Folder"
#~ msgid_plural "%1 Folders"
#~ msgstr[0] "%1 个文件夹"

#~ msgid "1 File"
#~ msgid_plural "%1 Files"
#~ msgstr[0] "%1 个文件"

#~ msgctxt "folders, files (size)"
#~ msgid "%1, %2 (%3)"
#~ msgstr "%1，%2 (%3)"

#~ msgctxt "folders, files"
#~ msgid "%1, %2"
#~ msgstr "%1，%2"

#~ msgctxt "files (size)"
#~ msgid "%1 (%2)"
#~ msgstr "%1 (%2)"

#~ msgctxt "items: folders, files (size)"
#~ msgid "%1: %2"
#~ msgstr "%1：%2"

#~ msgid "Could not read %1."
#~ msgstr "无法读取 %1。"

#~ msgid "Could not write to %1."
#~ msgstr "无法写入 %1。"

#~ msgid "Could not start process %1."
#~ msgstr "无法启动进程 %1。"

#~ msgid ""
#~ "Internal Error\n"
#~ "Please send a full bug report at http://bugs.kde.org\n"
#~ "%1"
#~ msgstr ""
#~ "内部错误\n"
#~ "请在 http://bugs.kde.org 上提交一个完整的错误报告\n"
#~ "%1"

#~ msgid "Malformed URL %1."
#~ msgstr "不正确的 URL %1。"

#~ msgid "The protocol %1 is not supported."
#~ msgstr "不支持协议 %1。"

#~ msgid "The protocol %1 is only a filter protocol."
#~ msgstr "协议 %1 只是一个过滤协议。"

#~ msgid "%1 is a folder, but a file was expected."
#~ msgstr "%1 是个文件夹，但现在需要一个文件。"

#~ msgid "%1 is a file, but a folder was expected."
#~ msgstr "%1 是个文件，但现在需要一个文件夹。"

#~ msgid "The file or folder %1 does not exist."
#~ msgstr "文件或文件夹 %1 不存在。"

#~ msgid "A file named %1 already exists."
#~ msgstr "名为 %1 的文件已存在。"

#~ msgid "A folder named %1 already exists."
#~ msgstr "名为 %1 的文件夹已存在。"

#~ msgid "No hostname specified."
#~ msgstr "没有指定主机名。"

#~ msgid "Unknown host %1"
#~ msgstr "未知的主机 %1"

#~ msgid "Access denied to %1."
#~ msgstr "拒绝访问 %1。"

#~ msgid ""
#~ "Access denied.\n"
#~ "Could not write to %1."
#~ msgstr ""
#~ "拒绝访问。\n"
#~ "无法写入 %1。"

#~ msgid "Could not enter folder %1."
#~ msgstr "无法进入文件夹 %1。"

#~ msgid "The protocol %1 does not implement a folder service."
#~ msgstr "协议 %1 没有实现文件夹服务。"

#~ msgid "Found a cyclic link in %1."
#~ msgstr "在 %1 中发现一个循环链接。"

#~ msgid "Found a cyclic link while copying %1."
#~ msgstr "在复制 %1 时发现一个循环链接。"

#~ msgid "Could not create socket for accessing %1."
#~ msgstr "无法为访问 %1 创建套接字。"

#~ msgid "Could not connect to host %1."
#~ msgstr "无法连接到主机 %1。"

#~ msgid "Connection to host %1 is broken."
#~ msgstr "到主机 %1 的连接中断。"

#~ msgid "The protocol %1 is not a filter protocol."
#~ msgstr "协议 %1 不是一个过滤协议。"

#~ msgid ""
#~ "Could not mount device.\n"
#~ "The reported error was:\n"
#~ "%1"
#~ msgstr ""
#~ "无法挂载设备。\n"
#~ "报告的错误为：\n"
#~ "%1"

#~ msgid ""
#~ "Could not unmount device.\n"
#~ "The reported error was:\n"
#~ "%1"
#~ msgstr ""
#~ "无法卸载设备。\n"
#~ "报告的错误为：\n"
#~ "%1"

#~ msgid "Could not read file %1."
#~ msgstr "无法读取文件 %1。"

#~ msgid "Could not write to file %1."
#~ msgstr "无法写入文件 %1。"

#~ msgid "Could not bind %1."
#~ msgstr "无法绑定 %1。"

#~ msgid "Could not listen %1."
#~ msgstr "无法监听 %1。"

#~ msgid "Could not accept %1."
#~ msgstr "无法接受 %1。"

#~ msgid "Could not access %1."
#~ msgstr "无法访问 %1。"

#~ msgid "Could not terminate listing %1."
#~ msgstr "无法停止列举 %1。"

#~ msgid "Could not make folder %1."
#~ msgstr "无法创建文件夹 %1。"

#~ msgid "Could not remove folder %1."
#~ msgstr "无法重命名文件夹 %1。"

#~ msgid "Could not resume file %1."
#~ msgstr "无法续传文件 %1。"

#~ msgid "Could not rename file %1."
#~ msgstr "无法重命名文件 %1。"

#~ msgid "Could not change permissions for %1."
#~ msgstr "无法更改 %1 的权限。"

#~ msgid "Could not change ownership for %1."
#~ msgstr "无法更改 %1 的所有权。"

#~ msgid "Could not delete file %1."
#~ msgstr "无法删除文件 %1。"

#~ msgid "The process for the %1 protocol died unexpectedly."
#~ msgstr "为 %1 协议服务的进程意外退出。"

#~ msgid ""
#~ "Error. Out of memory.\n"
#~ "%1"
#~ msgstr ""
#~ "错误。内存不足。\n"
#~ "%1"

#~ msgid ""
#~ "Unknown proxy host\n"
#~ "%1"
#~ msgstr ""
#~ "未知的代理主机\n"
#~ "%1"

#~ msgid "Authorization failed, %1 authentication not supported"
#~ msgstr "授权失败，不支持 %1 验证方式"

#~ msgid ""
#~ "User canceled action\n"
#~ "%1"
#~ msgstr ""
#~ "用户取消了动作\n"
#~ "%1"

#~ msgid ""
#~ "Internal error in server\n"
#~ "%1"
#~ msgstr ""
#~ "服务器内部错误\n"
#~ "%1"

#~ msgid ""
#~ "Timeout on server\n"
#~ "%1"
#~ msgstr ""
#~ "服务器超时\n"
#~ "%1"

#~ msgid ""
#~ "Unknown error\n"
#~ "%1"
#~ msgstr ""
#~ "未知的错误\n"
#~ "%1"

#~ msgid ""
#~ "Unknown interrupt\n"
#~ "%1"
#~ msgstr ""
#~ "未知的中断\n"
#~ "%1"

#~ msgid ""
#~ "Could not delete original file %1.\n"
#~ "Please check permissions."
#~ msgstr ""
#~ "无法删除原始文件 %1。\n"
#~ "请检查权限。"

#~ msgid ""
#~ "Could not delete partial file %1.\n"
#~ "Please check permissions."
#~ msgstr ""
#~ "无法删除部分文件 %1。\n"
#~ "请检查权限。"

#~ msgid ""
#~ "Could not rename original file %1.\n"
#~ "Please check permissions."
#~ msgstr ""
#~ "无法重命名原始文件 %1。\n"
#~ "请检查权限。"

#~ msgid ""
#~ "Could not rename partial file %1.\n"
#~ "Please check permissions."
#~ msgstr ""
#~ "无法重命名部分文件 %1。\n"
#~ "请检查权限。"

#~ msgid ""
#~ "Could not create symlink %1.\n"
#~ "Please check permissions."
#~ msgstr ""
#~ "无法创建符号链接 %1。\n"
#~ "请检查权限。"

#~ msgid ""
#~ "Could not write file %1.\n"
#~ "Disk full."
#~ msgstr ""
#~ "无法写入文件 %1。\n"
#~ "磁盘已满。"

#~ msgid ""
#~ "The source and destination are the same file.\n"
#~ "%1"
#~ msgstr ""
#~ "源文件和目标文件是同一文件。\n"
#~ "%1"

#~ msgid "%1 is required by the server, but is not available."
#~ msgstr "服务器需要 %1，但它不可用。"

#~ msgid "Access to restricted port in POST denied."
#~ msgstr "拒绝对 POST 中被限制端口的访问。"

#~ msgid ""
#~ "The required content size information was not provided for a POST "
#~ "operation."
#~ msgstr "未提供 POST 操作所需的内容大小信息。"

#~ msgid ""
#~ "Unknown error code %1\n"
#~ "%2\n"
#~ "Please send a full bug report at http://bugs.kde.org."
#~ msgstr ""
#~ "未知的错误代码 %1\n"
#~ "%2\n"
#~ "请在 http://bugs.kde.org 上提交一个完整的错误报告。"

#~ msgid "Opening connections is not supported with the protocol %1."
#~ msgstr "协议 %1 不支持打开连接。"

#~ msgid "Closing connections is not supported with the protocol %1."
#~ msgstr "协议 %1 不支持关闭连接。"

#~ msgid "Accessing files is not supported with the protocol %1."
#~ msgstr "协议 %1 不支持文件访问。"

#~ msgid "Writing to %1 is not supported."
#~ msgstr "不支持写入 %1。"

#~ msgid "There are no special actions available for protocol %1."
#~ msgstr "协议 %1 没有可用的特殊动作。"

#~ msgid "Listing folders is not supported for protocol %1."
#~ msgstr "协议 %1 不支持列出文件夹内容。"

#~ msgid "Retrieving data from %1 is not supported."
#~ msgstr "不支持从 %1 获取数据。"

#~ msgid "Retrieving mime type information from %1 is not supported."
#~ msgstr "抱歉，不支持从 %1 获取 MIME 类型。"

#~ msgid "Renaming or moving files within %1 is not supported."
#~ msgstr "不支持在 %1 内重命名或移动文件。"

#~ msgid "Creating symlinks is not supported with protocol %1."
#~ msgstr "协议 %1 不支持符号链接。"

#~ msgid "Copying files within %1 is not supported."
#~ msgstr "不支持在 %1 内复制文件。"

#~ msgid "Deleting files from %1 is not supported."
#~ msgstr "不支持从 %1 删除文件。"

#~ msgid "Creating folders is not supported with protocol %1."
#~ msgstr "协议 %1 不支持创建文件夹。"

#~ msgid "Changing the attributes of files is not supported with protocol %1."
#~ msgstr "协议 %1 不支持更改文件属性。"

#~ msgid "Changing the ownership of files is not supported with protocol %1."
#~ msgstr "协议 %1 不支持更改文件属主。"

#~ msgid "Using sub-URLs with %1 is not supported."
#~ msgstr "不支持在 %1 使用子 URL。"

#~ msgid "Multiple get is not supported with protocol %1."
#~ msgstr "协议 %1 不支持多次获取。"

#~ msgid "Opening files is not supported with protocol %1."
#~ msgstr "协议 %1 不支持打开文件。"

#~ msgid "Protocol %1 does not support action %2."
#~ msgstr "协议 %1 不支持动作 %2。"

#~ msgctxt "@info url"
#~ msgid "(unknown)"
#~ msgstr "(未知)"

#~ msgctxt "@info %1 error name, %2 description"
#~ msgid "<qt><p><b>%1</b></p><p>%2</p></qt>"
#~ msgstr "<qt><p><b>%1</b></p><p>%2</p></qt>"

#~ msgid "<b>Technical reason</b>: "
#~ msgstr "<b>技术原因</b>："

#~ msgid "<b>Details of the request</b>:"
#~ msgstr "<b>请求的细节</b>："

#~ msgid "<li>URL: %1</li>"
#~ msgstr "<li>URL：%1</li>"

#~ msgid "<li>Protocol: %1</li>"
#~ msgstr "<li>协议：%1</li>"

#~ msgid "<li>Date and time: %1</li>"
#~ msgstr "<li>日期和时间：%1</li>"

#~ msgid "<li>Additional information: %1</li>"
#~ msgstr "<li>额外信息：%1</li>"

#~ msgid "<b>Possible causes</b>:"
#~ msgstr "<b>可能原因</b>："

#~ msgid "<b>Possible solutions</b>:"
#~ msgstr "<b>可能的解决方法</b>："

#~ msgctxt "@info protocol"
#~ msgid "(unknown)"
#~ msgstr "(未知)"

#~ msgid ""
#~ "Contact your appropriate computer support system, whether the system "
#~ "administrator, or technical support group for further assistance."
#~ msgstr ""
#~ "请联系合适的计算机支持系统来获得更多帮助，例如系统管理员或技术支持小组。"

#~ msgid "Contact the administrator of the server for further assistance."
#~ msgstr "联系服务器的管理员以获得更多帮助。"

#~ msgid "Check your access permissions on this resource."
#~ msgstr "检查您对该资源的访问权限。"

#~ msgid ""
#~ "Your access permissions may be inadequate to perform the requested "
#~ "operation on this resource."
#~ msgstr "您可能没有足够权限来执行所请求的对该资源的操作。"

#~ msgid ""
#~ "The file may be in use (and thus locked) by another user or application."
#~ msgstr "文件可能正在被其它人或程序使用(所以被锁定)。"

#~ msgid ""
#~ "Check to make sure that no other application or user is using the file or "
#~ "has locked the file."
#~ msgstr "请检查并确定没有其它的程序或用户正在使用该文件或锁定该文件。"

#~ msgid "Although unlikely, a hardware error may have occurred."
#~ msgstr "虽然不太可能，也许出现了硬件错误。"

#~ msgid "You may have encountered a bug in the program."
#~ msgstr "您可能遇到了程序中的错误。"

#~ msgid ""
#~ "This is most likely to be caused by a bug in the program. Please consider "
#~ "submitting a full bug report as detailed below."
#~ msgstr "最大的可能是程序中的错误导致。请考虑提交一个详细的错误报告。"

#~ msgid ""
#~ "Update your software to the latest version. Your distribution should "
#~ "provide tools to update your software."
#~ msgstr ""
#~ "请将您的软件更新至最新版本。您使用的发行版本应该提供了更新软件的工具。"

#~ msgid ""
#~ "When all else fails, please consider helping the KDE team or the third "
#~ "party maintainer of this software by submitting a high quality bug "
#~ "report. If the software is provided by a third party, please contact them "
#~ "directly. Otherwise, first look to see if the same bug has been submitted "
#~ "by someone else by searching at the <a href=\"http://bugs.kde.org/\">KDE "
#~ "bug reporting website</a>. If not, take note of the details given above, "
#~ "and include them in your bug report, along with as many other details as "
#~ "you think might help."
#~ msgstr ""
#~ "当其它所有方式都失败后，请考虑提交一份高质量的错误报告来帮助 KDE 团队或此"
#~ "软件的第三方维护者。如果该软件是由第三方提供的，请直接联系他们。否则，先看"
#~ "看相同的错误是否已经由其他人提交了。您可以在 <a href=\"http://bugs.kde."
#~ "org/\">KDE 错误报告网站</a>搜索一番。如果没有相同的错误，请注意上面给出的"
#~ "信息，并在错误报告中包含这些信息，以及您认为可能有帮助的其它细节。"

#~ msgid "There may have been a problem with your network connection."
#~ msgstr "您的网络连接可能有问题。"

#~ msgid ""
#~ "There may have been a problem with your network configuration. If you "
#~ "have been accessing the Internet with no problems recently, this is "
#~ "unlikely."
#~ msgstr "您的网络配置可能有问题。如果您最近访问网络没有问题，这就不太可能。"

#~ msgid ""
#~ "There may have been a problem at some point along the network path "
#~ "between the server and this computer."
#~ msgstr "在网络中该计算机和服务器之间的路径可能有问题。"

#~ msgid "Try again, either now or at a later time."
#~ msgstr "请即刻或稍后再重试。"

#~ msgid "A protocol error or incompatibility may have occurred."
#~ msgstr "可能出现了协议错误或不兼容。"

#~ msgid "Ensure that the resource exists, and try again."
#~ msgstr "请确保资源存在后再重试。"

#~ msgid "The specified resource may not exist."
#~ msgstr "指定的资源可能不存在。"

#~ msgid "You may have incorrectly typed the location."
#~ msgstr "您可能输入了错误的位置。"

#~ msgid ""
#~ "Double-check that you have entered the correct location and try again."
#~ msgstr "请反复确认您输入了正确的位置后再重试。"

#~ msgid "Check your network connection status."
#~ msgstr "检查您的网络连接状态。"

#~ msgid "Cannot Open Resource For Reading"
#~ msgstr "无法打开资源来读取"

#~ msgid ""
#~ "This means that the contents of the requested file or folder <strong>%1</"
#~ "strong> could not be retrieved, as read access could not be obtained."
#~ msgstr ""
#~ "由于无法获取读权限，无法获取所请求的文件或文件夹 <strong>%1</strong> 的内"
#~ "容。"

#~ msgid "You may not have permissions to read the file or open the folder."
#~ msgstr "您可能没有读取文件或打开文件夹的权限。"

#~ msgid "Cannot Open Resource For Writing"
#~ msgstr "无法打开资源以写入"

#~ msgid ""
#~ "This means that the file, <strong>%1</strong>, could not be written to as "
#~ "requested, because access with permission to write could not be obtained."
#~ msgstr "由于无法获得写权限，无法按请求写入文件 <strong>%1</strong>。"

#~ msgid "Cannot Initiate the %1 Protocol"
#~ msgstr "无法初始化 %1 协议"

#~ msgid "Unable to Launch Process"
#~ msgstr "无法启动进程"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol could not be started. This is usually due to technical "
#~ "reasons."
#~ msgstr ""
#~ "您计算机上提供 <strong>%1</strong> 协议的程序无法被启动。这通常是由于技术"
#~ "原因。"

#~ msgid ""
#~ "The program which provides compatibility with this protocol may not have "
#~ "been updated with your last update of KDE. This can cause the program to "
#~ "be incompatible with the current version and thus not start."
#~ msgstr ""
#~ "提供此协议兼容性的程序可能没有与您最新的 KDE 一起更新。这导致程序与当前版"
#~ "本不兼容，因此无法启动。"

#~ msgid "Internal Error"
#~ msgstr "内部错误"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol has reported an internal error."
#~ msgstr "您计算机上提供 <strong>%1</strong> 协议的程序报告了一个内部错误。"

#~ msgid "Improperly Formatted URL"
#~ msgstr "未正确格式化的 URL"

#~ msgid ""
#~ "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
#~ "strong>ocator (URL) that you entered was not properly formatted. The "
#~ "format of a URL is generally as follows:<blockquote><strong>protocol://"
#~ "user:password@www.example.org:port/folder/filename.extension?query=value</"
#~ "strong></blockquote>"
#~ msgstr ""
#~ "您输入的统一资源定位符(<strong>URL</strong>)格式不对。URL 的格式应该是："
#~ "<blockquote><strong>协议://用户名@密码:www.example.org:端口/文件夹/文件名."
#~ "扩展名?查询=值</strong></blockquote>"

#~ msgid "Unsupported Protocol %1"
#~ msgstr "不支持的协议 %1"

#~ msgid ""
#~ "The protocol <strong>%1</strong> is not supported by the KDE programs "
#~ "currently installed on this computer."
#~ msgstr "目前安装在该计算机上的 KDE 程序不支持协议 <strong>%1</strong>。"

#~ msgid "The requested protocol may not be supported."
#~ msgstr "请求的协议可能不被支持。"

#~ msgid ""
#~ "The versions of the %1 protocol supported by this computer and the server "
#~ "may be incompatible."
#~ msgstr "该计算机支持的 %1 协议的版本可能和服务器的版本不兼容。"

#~ msgid ""
#~ "You may perform a search on the Internet for a KDE program (called a "
#~ "kioslave or ioslave) which supports this protocol. Places to search "
#~ "include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a "
#~ "href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
#~ msgstr ""
#~ "您可以在 Internet 上搜索支持此协议的 KDE 程序(称为 kioslave 或 ioslave)。"
#~ "推荐的搜索地点是 <a href=\"http://kde-apps.org/\">http://kde-apps.org/</"
#~ "a> 和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>。"

#~ msgid "URL Does Not Refer to a Resource."
#~ msgstr "URL 不是一个资源。"

#~ msgid "Protocol is a Filter Protocol"
#~ msgstr "协议是一个过滤协议"

#~ msgid ""
#~ "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
#~ "strong>ocator (URL) that you entered did not refer to a specific resource."
#~ msgstr "您输入的统一资源定位符(<strong>URL</strong>)不是特定资源。"

#~ msgid ""
#~ "KDE is able to communicate through a protocol within a protocol; the "
#~ "protocol specified is only for use in such situations, however this is "
#~ "not one of these situations. This is a rare event, and is likely to "
#~ "indicate a programming error."
#~ msgstr ""
#~ "KDE 可以通过协议中的协议通讯；特定的协议仅用于特定的情况，但是目前并不是这"
#~ "些情况之一。这种情况非常罕见，可能表明出现了编程错误。"

#~ msgid "Unsupported Action: %1"
#~ msgstr "不支持的动作：%1"

#~ msgid ""
#~ "The requested action is not supported by the KDE program which is "
#~ "implementing the <strong>%1</strong> protocol."
#~ msgstr "实现 <strong>%1</strong> 协议的 KDE 程序不支持所请求的动作。"

#~ msgid ""
#~ "This error is very much dependent on the KDE program. The additional "
#~ "information should give you more information than is available to the KDE "
#~ "input/output architecture."
#~ msgstr ""
#~ "该错误依赖于 KDE 程序。额外的信息应该给您提供比 KDE 输入输出体系更多的信"
#~ "息。"

#~ msgid "Attempt to find another way to accomplish the same outcome."
#~ msgstr "试图查找另一种获得同一结果的方式。"

#~ msgid "File Expected"
#~ msgstr "需要文件"

#~ msgid ""
#~ "The request expected a file, however the folder <strong>%1</strong> was "
#~ "found instead."
#~ msgstr "请求需要一个文件，然而 <strong>%1</strong> 是一个文件夹。"

#~ msgid "This may be an error on the server side."
#~ msgstr "这可能是服务器端的错误。"

#~ msgid "Folder Expected"
#~ msgstr "需要文件夹"

#~ msgid ""
#~ "The request expected a folder, however the file <strong>%1</strong> was "
#~ "found instead."
#~ msgstr "请求需要一个文件夹，然而 <strong>%1</strong> 是一个文件。"

#~ msgid "File or Folder Does Not Exist"
#~ msgstr "文件或文件夹不存在"

#~ msgid "The specified file or folder <strong>%1</strong> does not exist."
#~ msgstr "指定的文件或文件夹 <strong>%1</strong> 不存在。"

#~ msgid ""
#~ "The requested file could not be created because a file with the same name "
#~ "already exists."
#~ msgstr "无法创建请求的文件，原因是已经存在相同名称的文件。"

#~ msgid ""
#~ "Try moving the current file out of the way first, and then try again."
#~ msgstr "请试着先将当前文件移动到其它位置，然后再试一次。"

#~ msgid "Delete the current file and try again."
#~ msgstr "删除当前文件然后再试一次。"

#~ msgid "Choose an alternate filename for the new file."
#~ msgstr "为新建文件选择其它的文件名。"

#~ msgid ""
#~ "The requested folder could not be created because a folder with the same "
#~ "name already exists."
#~ msgstr "无法创建请求的文件夹，原因是已经存在相同名称的文件夹。"

#~ msgid ""
#~ "Try moving the current folder out of the way first, and then try again."
#~ msgstr "请试着先将当前文件夹移动到其它位置，然后再试一次。"

#~ msgid "Delete the current folder and try again."
#~ msgstr "删除当前文件夹然后再试一次。"

#~ msgid "Choose an alternate name for the new folder."
#~ msgstr "为新建文件夹选择其它的名称。"

#~ msgid "Unknown Host"
#~ msgstr "未知主机"

#~ msgid ""
#~ "An unknown host error indicates that the server with the requested name, "
#~ "<strong>%1</strong>, could not be located on the Internet."
#~ msgstr ""
#~ "未知主机错误表明了在互联网上找不到所请求的名称为 <strong>%1</strong> 的服"
#~ "务器。"

#~ msgid ""
#~ "The name that you typed, %1, may not exist: it may be incorrectly typed."
#~ msgstr "您输入的名称 %1 可能不存在：可能输错了。"

#~ msgid "Access Denied"
#~ msgstr "拒绝访问"

#~ msgid "Access was denied to the specified resource, <strong>%1</strong>."
#~ msgstr "拒绝访问指定的资源，<strong>%1</strong>。"

#~ msgid ""
#~ "You may have supplied incorrect authentication details or none at all."
#~ msgstr "您可能提供了不正确的验证细节或根本没有提供。"

#~ msgid ""
#~ "Your account may not have permission to access the specified resource."
#~ msgstr "您的账户可能没有访问指定资源的权限。"

#~ msgid ""
#~ "Retry the request and ensure your authentication details are entered "
#~ "correctly."
#~ msgstr "重试请求并确保您已正确输入了验证细节。"

#~ msgid "Write Access Denied"
#~ msgstr "拒绝写入"

#~ msgid ""
#~ "This means that an attempt to write to the file <strong>%1</strong> was "
#~ "rejected."
#~ msgstr "这意味着试图写入文件 <strong>%1</strong> 被拒绝。"

#~ msgid "Unable to Enter Folder"
#~ msgstr "无法进入文件夹"

#~ msgid ""
#~ "This means that an attempt to enter (in other words, to open) the "
#~ "requested folder <strong>%1</strong> was rejected."
#~ msgstr "这意味着试图进入(或说打开)请求的文件夹 <strong>%1</strong> 被拒绝。"

#~ msgid "Folder Listing Unavailable"
#~ msgstr "文件夹列出不可用"

#~ msgid "Protocol %1 is not a Filesystem"
#~ msgstr "协议 %1 不是一个文件系统"

#~ msgid ""
#~ "This means that a request was made which requires determining the "
#~ "contents of the folder, and the KDE program supporting this protocol is "
#~ "unable to do so."
#~ msgstr ""
#~ "这意味着产生了一个需要确定文件夹内容的请求，而支持此协议的 KDE 程序无法完"
#~ "成此功能。"

#~ msgid "Cyclic Link Detected"
#~ msgstr "检测到循环链接"

#~ msgid ""
#~ "UNIX environments are commonly able to link a file or folder to a "
#~ "separate name and/or location. KDE detected a link or series of links "
#~ "that results in an infinite loop - i.e. the file was (perhaps in a "
#~ "roundabout way) linked to itself."
#~ msgstr ""
#~ "UNIX 环境通常允许将文件或文件夹链接到其它名称和/或位置。KDE 检测到链接的结"
#~ "果是无穷循环。即，文件(可能是间接的)链接到它自己。"

#~ msgid ""
#~ "Delete one part of the loop in order that it does not cause an infinite "
#~ "loop, and try again."
#~ msgstr "删除循环中的一部分，以便不再构成无穷循环，然后再试一次。"

#~ msgid "Request Aborted By User"
#~ msgstr "请求被用户中止"

#~ msgid "The request was not completed because it was aborted."
#~ msgstr "请求未完成，原因是被中止。"

#~ msgid "Retry the request."
#~ msgstr "重试请求。"

#~ msgid "Cyclic Link Detected During Copy"
#~ msgstr "复制时检测到了循环链接"

#~ msgid ""
#~ "UNIX environments are commonly able to link a file or folder to a "
#~ "separate name and/or location. During the requested copy operation, KDE "
#~ "detected a link or series of links that results in an infinite loop - i."
#~ "e. the file was (perhaps in a roundabout way) linked to itself."
#~ msgstr ""
#~ "UNIX 环境通常允许将文件或文件夹链接到其它名称和/或位置。在请求的复制过程"
#~ "中，KDE 检测到链接的结果是无穷循环。即，文件(可能是间接的)链接到它自己。"

#~ msgid "Could Not Create Network Connection"
#~ msgstr "无法创建网络连接"

#~ msgid "Could Not Create Socket"
#~ msgstr "无法创建套接字"

#~ msgid ""
#~ "This is a fairly technical error in which a required device for network "
#~ "communications (a socket) could not be created."
#~ msgstr "这是一个技术错误。无法创建网络通讯(套接字)请求的设备。"

#~ msgid ""
#~ "The network connection may be incorrectly configured, or the network "
#~ "interface may not be enabled."
#~ msgstr "网络连接可能配置不正确，或者网络接口未启用。"

#~ msgid "Connection to Server Refused"
#~ msgstr "拒绝连接服务器"

#~ msgid ""
#~ "The server <strong>%1</strong> refused to allow this computer to make a "
#~ "connection."
#~ msgstr "服务器 <strong>%1</strong> 拒绝此计算机连接。"

#~ msgid ""
#~ "The server, while currently connected to the Internet, may not be "
#~ "configured to allow requests."
#~ msgstr "目前虽然连接到 Internet，该服务器可能没有被配置成允许接受请求。"

#~ msgid ""
#~ "The server, while currently connected to the Internet, may not be running "
#~ "the requested service (%1)."
#~ msgstr "目前虽然连接到互联网中，该服务器可能没有在运行所请求的服务(%1)。"

#~ msgid ""
#~ "A network firewall (a device which restricts Internet requests), either "
#~ "protecting your network or the network of the server, may have "
#~ "intervened, preventing this request."
#~ msgstr ""
#~ "网络防火墙(限制 Internet 请求的设备)，保护您的网络或服务器网络的设备，可能"
#~ "干涉并阻止了这一请求。"

#~ msgid "Connection to Server Closed Unexpectedly"
#~ msgstr "到服务器的连接异常关闭"

#~ msgid ""
#~ "Although a connection was established to <strong>%1</strong>, the "
#~ "connection was closed at an unexpected point in the communication."
#~ msgstr ""
#~ "尽管已经建立了到 <strong>%1</strong> 的连接，该连接在通讯的未预期点处已关"
#~ "闭。"

#~ msgid ""
#~ "A protocol error may have occurred, causing the server to close the "
#~ "connection as a response to the error."
#~ msgstr "可能发生了协议错误，导致服务器关闭了连接作为对错误的响应。"

#~ msgid "URL Resource Invalid"
#~ msgstr "URL 资源无效"

#~ msgid "Protocol %1 is not a Filter Protocol"
#~ msgstr "协议 %1 不是一个过滤协议"

#~ msgid ""
#~ "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
#~ "strong>ocator (URL) that you entered did not refer to a valid mechanism "
#~ "of accessing the specific resource, <strong>%1%2</strong>."
#~ msgstr ""
#~ "您输入的统一资源定位符(<strong>URL</strong>)格式不是访问指定资源 <strong>"
#~ "%1%2</strong> 的有效机制。"

#~ msgid ""
#~ "KDE is able to communicate through a protocol within a protocol. This "
#~ "request specified a protocol be used as such, however this protocol is "
#~ "not capable of such an action. This is a rare event, and is likely to "
#~ "indicate a programming error."
#~ msgstr ""
#~ "KDE 可以通过协议中的协议通讯；特定的协议仅用于特定的情况，但是目前并不是这"
#~ "些情况之一。这种情况非常罕见，可能表明出现了编程错误。"

#~ msgid "Unable to Initialize Input/Output Device"
#~ msgstr "无法初始化输入/输出设备"

#~ msgid "Could Not Mount Device"
#~ msgstr "无法挂载设备"

#~ msgid ""
#~ "The requested device could not be initialized (\"mounted\"). The reported "
#~ "error was: <strong>%1</strong>"
#~ msgstr "请求的设备无法被初始化(“被挂载”)。报告的错误是：<strong>%1</strong>"

#~ msgid ""
#~ "The device may not be ready, for example there may be no media in a "
#~ "removable media device (i.e. no CD-ROM in a CD drive), or in the case of "
#~ "a peripheral/portable device, the device may not be correctly connected."
#~ msgstr ""
#~ "设备可能没有就绪，如可移介质驱动器中没有介质(即光驱中没有光盘)，或者便携设"
#~ "备没有被正确连接。"

#~ msgid ""
#~ "You may not have permissions to initialize (\"mount\") the device. On "
#~ "UNIX systems, often system administrator privileges are required to "
#~ "initialize a device."
#~ msgstr ""
#~ "您可能没有初始化(“挂载”)该设备的权限。在 UNIX 系统中，要初始化设备通常需要"
#~ "系统管理员权限。"

#~ msgid ""
#~ "Check that the device is ready; removable drives must contain media, and "
#~ "portable devices must be connected and powered on.; and try again."
#~ msgstr ""
#~ "请检查该设备已经就绪；可移驱动器中必须包含介质，而且便携设备必须被正确连接"
#~ "并打开电源；然后再试一次。"

#~ msgid "Unable to Uninitialize Input/Output Device"
#~ msgstr "无法取消初始化输入/输出设备"

#~ msgid "Could Not Unmount Device"
#~ msgstr "无法卸载设备"

#~ msgid ""
#~ "The requested device could not be uninitialized (\"unmounted\"). The "
#~ "reported error was: <strong>%1</strong>"
#~ msgstr "请求的设备无法被卸载。报告的错误是：<strong>%1</strong>"

#~ msgid ""
#~ "The device may be busy, that is, still in use by another application or "
#~ "user. Even such things as having an open browser window on a location on "
#~ "this device may cause the device to remain in use."
#~ msgstr ""
#~ "该设备可能正忙，即正被其它程序或用户使用。甚至打开一个此设备上位置的浏览器"
#~ "窗口都可能导致它处于被使用状态。"

#~ msgid ""
#~ "You may not have permissions to uninitialize (\"unmount\") the device. On "
#~ "UNIX systems, system administrator privileges are often required to "
#~ "uninitialize a device."
#~ msgstr ""
#~ "您没有卸载设备的权限。在 UNIX 系统中，要卸载设备通常需要系统管理员权限。"

#~ msgid "Check that no applications are accessing the device, and try again."
#~ msgstr "请确定没有应用程序正在使用该设备，然后再试一次。"

#~ msgid "Cannot Read From Resource"
#~ msgstr "无法读取资源"

#~ msgid ""
#~ "This means that although the resource, <strong>%1</strong>, was able to "
#~ "be opened, an error occurred while reading the contents of the resource."
#~ msgstr ""
#~ "这意味着，资源 <strong>%1</strong> 虽然可以打开，但是在读取资源内容的时候"
#~ "发生了错误。"

#~ msgid "You may not have permissions to read from the resource."
#~ msgstr "您没有读取此资源的权限。"

#~ msgid "Cannot Write to Resource"
#~ msgstr "无法写入资源"

#~ msgid ""
#~ "This means that although the resource, <strong>%1</strong>, was able to "
#~ "be opened, an error occurred while writing to the resource."
#~ msgstr ""
#~ "这意味着，资源 <strong>%1</strong> 虽然可以打开，但是在写入资源的时候发生"
#~ "了错误。"

#~ msgid "You may not have permissions to write to the resource."
#~ msgstr "您没有写入此资源的权限。"

#~ msgid "Could Not Listen for Network Connections"
#~ msgstr "无法监听网络连接"

#~ msgid "Could Not Bind"
#~ msgstr "无法绑定"

#~ msgid ""
#~ "This is a fairly technical error in which a required device for network "
#~ "communications (a socket) could not be established to listen for incoming "
#~ "network connections."
#~ msgstr ""
#~ "这是一个技术错误。无法建立网络通讯(套接字)请求的设备来监听进入的网络连接。"

#~ msgid "Could Not Listen"
#~ msgstr "无法监听"

#~ msgid "Could Not Accept Network Connection"
#~ msgstr "无法接受网络连接"

#~ msgid ""
#~ "This is a fairly technical error in which an error occurred while "
#~ "attempting to accept an incoming network connection."
#~ msgstr "这是一个技术错误。接受进入的网络连接时发生了错误。"

#~ msgid "You may not have permissions to accept the connection."
#~ msgstr "您可能没有接受连接的权限。"

#~ msgid "Could Not Login: %1"
#~ msgstr "无法登录：%1"

#~ msgid ""
#~ "An attempt to login to perform the requested operation was unsuccessful."
#~ msgstr "试图登录以执行请求的操作没有成功。"

#~ msgid "Could Not Determine Resource Status"
#~ msgstr "无法确定资源状态"

#~ msgid "Could Not Stat Resource"
#~ msgstr "无法查询资源状态"

#~ msgid ""
#~ "An attempt to determine information about the status of the resource "
#~ "<strong>%1</strong>, such as the resource name, type, size, etc., was "
#~ "unsuccessful."
#~ msgstr ""
#~ "试图确定关于资源 <strong>%1</strong> 状态像资源名称、类型、大小等有关信息"
#~ "的操作没有成功。"

#~ msgid ""
#~ "The specified resource may not have existed or may not be accessible."
#~ msgstr "指定的资源可能不存在或不可访问。"

#~ msgid "Could Not Cancel Listing"
#~ msgstr "无法取消列举内容"

#~ msgid "FIXME: Document this"
#~ msgstr "FIXME：为这里写文档"

#~ msgid "Could Not Create Folder"
#~ msgstr "无法创建文件夹"

#~ msgid "An attempt to create the requested folder failed."
#~ msgstr "试图创建所请求的文件夹失败。"

#~ msgid "The location where the folder was to be created may not exist."
#~ msgstr "要创建文件夹的位置可能不存在。"

#~ msgid "Could Not Remove Folder"
#~ msgstr "无法删除文件夹"

#~ msgid ""
#~ "An attempt to remove the specified folder, <strong>%1</strong>, failed."
#~ msgstr "试图删除指定文件夹 <strong>%1</strong> 失败。"

#~ msgid "The specified folder may not exist."
#~ msgstr "指定的文件夹可能不存在。"

#~ msgid "The specified folder may not be empty."
#~ msgstr "指定的文件夹可能不为空。"

#~ msgid "Ensure that the folder exists and is empty, and try again."
#~ msgstr "请确定文件夹已存在且为空，然后再试一次。"

#~ msgid "Could Not Resume File Transfer"
#~ msgstr "无法继续文件传输"

#~ msgid ""
#~ "The specified request asked that the transfer of file <strong>%1</strong> "
#~ "be resumed at a certain point of the transfer. This was not possible."
#~ msgstr ""
#~ "指定的请求要求传送文件 <strong>%1</strong> 在传送的特定点继续。这不可能。"

#~ msgid "The protocol, or the server, may not support file resuming."
#~ msgstr "此协议或者服务器不支持文件续传。"

#~ msgid "Retry the request without attempting to resume transfer."
#~ msgstr "不试图续传而重试请求。"

#~ msgid "Could Not Rename Resource"
#~ msgstr "无法重命名资源"

#~ msgid ""
#~ "An attempt to rename the specified resource <strong>%1</strong> failed."
#~ msgstr "试图重命名指定资源 <strong>%1</strong> 失败。"

#~ msgid "Could Not Alter Permissions of Resource"
#~ msgstr "无法改变资源的权限"

#~ msgid ""
#~ "An attempt to alter the permissions on the specified resource <strong>%1</"
#~ "strong> failed."
#~ msgstr "试图改变指定资源 <strong>%1</strong> 的权限失败。"

#~ msgid "Could Not Change Ownership of Resource"
#~ msgstr "无法改变资源的权限"

#~ msgid ""
#~ "An attempt to change the ownership of the specified resource <strong>%1</"
#~ "strong> failed."
#~ msgstr "试图改变指定资源 <strong>%1</strong> 的权限失败。"

#~ msgid "Could Not Delete Resource"
#~ msgstr "无法删除资源"

#~ msgid ""
#~ "An attempt to delete the specified resource <strong>%1</strong> failed."
#~ msgstr "试图删除指定资源 <strong>%1</strong> 失败。"

#~ msgid "Unexpected Program Termination"
#~ msgstr "未预料到的程序终止"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol has unexpectedly terminated."
#~ msgstr "您计算机上提供到 <strong>%1</strong> 协议访问的程序未预料地终止。"

#~ msgid "Out of Memory"
#~ msgstr "内存不足"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol could not obtain the memory required to continue."
#~ msgstr ""
#~ "您计算机上提供到 <strong>%1</strong> 协议访问的程序无法获得继续运行所需的"
#~ "内存。"

#~ msgid "Unknown Proxy Host"
#~ msgstr "未知的代理主机"

#~ msgid ""
#~ "While retrieving information about the specified proxy host, <strong>%1</"
#~ "strong>, an Unknown Host error was encountered. An unknown host error "
#~ "indicates that the requested name could not be located on the Internet."
#~ msgstr ""
#~ "在获取关于指定代理主机 <strong>%1</strong> 的信息时，出现了“未知主机”错"
#~ "误。“未知主机”错误表明在互联网上找不到所请求的名称。"

#~ msgid ""
#~ "There may have been a problem with your network configuration, "
#~ "specifically your proxy's hostname. If you have been accessing the "
#~ "Internet with no problems recently, this is unlikely."
#~ msgstr ""
#~ "您的网络配置可能有问题，特别是您的代理主机名。如果您最近访问互联网时没有出"
#~ "现问题，这就不太可能。"

#~ msgid "Double-check your proxy settings and try again."
#~ msgstr "请反复检查您的代理设置后再重试。"

#~ msgid "Authentication Failed: Method %1 Not Supported"
#~ msgstr "授权失败：不支持 %1 验证方式"

#~ msgid ""
#~ "Although you may have supplied the correct authentication details, the "
#~ "authentication failed because the method that the server is using is not "
#~ "supported by the KDE program implementing the protocol %1."
#~ msgstr ""
#~ "虽然您可能提供了正确的验证信息，验证仍旧失败了。原因是该服务器所使用的方法"
#~ "未被实现协议 %1 的 KDE 程序支持。"

#~ msgid ""
#~ "Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/"
#~ "</a> to inform the KDE team of the unsupported authentication method."
#~ msgstr ""
#~ "请向 <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> 提交错误报"
#~ "告，通知 KDE 团队不支持的验证方法。"

#~ msgid "Request Aborted"
#~ msgstr "请求中止"

#~ msgid "Internal Error in Server"
#~ msgstr "服务器内部错误"

#~ msgid ""
#~ "The program on the server which provides access to the <strong>%1</"
#~ "strong> protocol has reported an internal error: %2."
#~ msgstr ""
#~ "服务器上提供到 <strong>%1</strong> 协议访问的程序报告了一个内部错误：%2。"

#~ msgid ""
#~ "This is most likely to be caused by a bug in the server program. Please "
#~ "consider submitting a full bug report as detailed below."
#~ msgstr ""
#~ "最可能的原因是服务器程序错误。请考虑提交一份完整的错误报告，步骤如下。"

#~ msgid ""
#~ "Contact the administrator of the server to advise them of the problem."
#~ msgstr "请联系您的管理员，告诉他们这一问题。"

#~ msgid ""
#~ "If you know who the authors of the server software are, submit the bug "
#~ "report directly to them."
#~ msgstr "如果您知道服务器软件的作者是谁，请直接向他们提交错误报告。"

#~ msgid "Timeout Error"
#~ msgstr "超时错误"

#~ msgid ""
#~ "Although contact was made with the server, a response was not received "
#~ "within the amount of time allocated for the request as follows:"
#~ "<ul><li>Timeout for establishing a connection: %1 seconds</li><li>Timeout "
#~ "for receiving a response: %2 seconds</li><li>Timeout for accessing proxy "
#~ "servers: %3 seconds</li></ul>Please note that you can alter these timeout "
#~ "settings in the KDE System Settings, by selecting Network Settings -> "
#~ "Connection Preferences."
#~ msgstr ""
#~ "虽然已经联系了服务器，但在该请求所规定的时间内没有收到回应：<ul><li>建立连"
#~ "接超时：%1 秒</li><li>接收回应超时：%2 秒</li><li>访问代理服务器超时：%3 "
#~ "秒</li></ul>请注意，您可以在 KDE 系统设置中通过选择“网络”->“首选项”来改变"
#~ "这些超时设置。"

#~ msgid "The server was too busy responding to other requests to respond."
#~ msgstr "服务器忙于响应其它请求，以致无法对该请求做出响应。"

#~ msgid "Unknown Error"
#~ msgstr "未知的错误"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol has reported an unknown error: %2."
#~ msgstr ""
#~ "您的计算机上提供到 <strong>%1</strong> 协议访问的程序报告了一个未知错误："
#~ "%2。"

#~ msgid "Unknown Interruption"
#~ msgstr "未知的中断"

#~ msgid ""
#~ "The program on your computer which provides access to the <strong>%1</"
#~ "strong> protocol has reported an interruption of an unknown type: %2."
#~ msgstr ""
#~ "您的计算机上提供到 <strong>%1</strong> 协议访问的程序报告了一个未知中断："
#~ "%2。"

#~ msgid "Could Not Delete Original File"
#~ msgstr "无法删除原始文件"

#~ msgid ""
#~ "The requested operation required the deleting of the original file, most "
#~ "likely at the end of a file move operation. The original file <strong>%1</"
#~ "strong> could not be deleted."
#~ msgstr ""
#~ "所请求的操作需要删除原始文件，很可能是文件移动操作的最后步骤。原始文件 "
#~ "<strong>%1</strong> 无法被删除。"

#~ msgid "Could Not Delete Temporary File"
#~ msgstr "无法删除临时文件"

#~ msgid ""
#~ "The requested operation required the creation of a temporary file in "
#~ "which to save the new file while being downloaded. This temporary file "
#~ "<strong>%1</strong> could not be deleted."
#~ msgstr ""
#~ "所请求的操作需要创建一个临时文件来保存正在下载的新文件。临时文件 <strong>"
#~ "%1</strong> 无法被删除。"

#~ msgid "Could Not Rename Original File"
#~ msgstr "无法重命名原始文件"

#~ msgid ""
#~ "The requested operation required the renaming of the original file "
#~ "<strong>%1</strong>, however it could not be renamed."
#~ msgstr ""
#~ "所请求的操作需要重命名原始文件 <strong>%1</strong>，但是它无法被重命名。"

#~ msgid "Could Not Rename Temporary File"
#~ msgstr "无法重命名临时文件"

#~ msgid ""
#~ "The requested operation required the creation of a temporary file <strong>"
#~ "%1</strong>, however it could not be created."
#~ msgstr ""
#~ "所请求的操作需要创建临时文件 <strong>%1</strong>，但是该文件无法创建。"

#~ msgid "Could Not Create Link"
#~ msgstr "无法创建链接"

#~ msgid "Could Not Create Symbolic Link"
#~ msgstr "无法创建符号链接"

#~ msgid "The requested symbolic link %1 could not be created."
#~ msgstr "所请求的符号链接 %1 无法被创建。"

#~ msgid "No Content"
#~ msgstr "无内容"

#~ msgid "Disk Full"
#~ msgstr "磁盘已满"

#~ msgid ""
#~ "The requested file <strong>%1</strong> could not be written to as there "
#~ "is inadequate disk space."
#~ msgstr ""
#~ "所请求的文件 <strong>%1</strong> 无法被写入，原因是没有足够的磁盘空间。"

#~ msgid ""
#~ "Free up enough disk space by 1) deleting unwanted and temporary files; 2) "
#~ "archiving files to removable media storage such as CD-Recordable discs; "
#~ "or 3) obtain more storage capacity."
#~ msgstr ""
#~ "释放足够磁盘空间，方法有：1) 删除不需要的和临时的文件；2) 把文件归档到 CD-"
#~ "R 之类的可移动介质上；或 3) 获取更多存储容量。"

#~ msgid "Source and Destination Files Identical"
#~ msgstr "源文件和目标文件是同一文件"

#~ msgid ""
#~ "The operation could not be completed because the source and destination "
#~ "files are the same file."
#~ msgstr "由于源文件和目标文件是同一文件，操作无法完成。"

#~ msgid "Choose a different filename for the destination file."
#~ msgstr "为目标文件选择另一个文件名。"

#~ msgid "Undocumented Error"
#~ msgstr "未记录在文档中的错误"

#~ msgctxt "@title job"
#~ msgid "Moving"
#~ msgstr "移动"

#~ msgctxt "@title job"
#~ msgid "Copying"
#~ msgstr "复制"

#~ msgctxt "@title job"
#~ msgid "Creating directory"
#~ msgstr "创建目录"

#~ msgctxt "@title job"
#~ msgid "Deleting"
#~ msgstr "删除"

#~ msgctxt "@title job"
#~ msgid "Examining"
#~ msgstr "审查"

#~ msgctxt "@title job"
#~ msgid "Transferring"
#~ msgstr "传送"

#~ msgctxt "@title job"
#~ msgid "Mounting"
#~ msgstr "挂载"

#~ msgid "Device"
#~ msgstr "设备"

#~ msgid "Mountpoint"
#~ msgstr "挂载点"

#~ msgctxt "@title job"
#~ msgid "Unmounting"
#~ msgstr "卸载"

#~ msgctxt "@info"
#~ msgid ""
#~ "Do you want to permanently delete all items from Trash? This action "
#~ "cannot be undone."
#~ msgstr "您想要永久删除回收站中的项目吗？此操作无法撤销。"

#~ msgid "Do you really want to move this item to the trash?"
#~ msgid_plural "Do you really want to move these %1 items to the trash?"
#~ msgstr[0] "您真的要将这 %1 项移动至回收站吗？"

#~ msgctxt "Verb"
#~ msgid "&Trash"
#~ msgstr "移至回收站(&T)"

#~ msgid "The peer SSL certificate chain appears to be corrupt."
#~ msgstr "对端的 SSL 证书链似乎已损坏。"

#~ msgid "SSL"
#~ msgstr "SSL"

#~ msgid "Updating System Configuration"
#~ msgstr "更新系统配置"

#~ msgid "Updating system configuration."
#~ msgstr "更新系统配置。"

#~ msgid "No service implementing %1"
#~ msgstr "没有实现 %1 的服务"

#~ msgid "The desktop entry file %1 has no Type=... entry."
#~ msgstr "桌面项文件 %1 没有 Type=... 项。"

#~ msgid ""
#~ "The desktop entry of type\n"
#~ "%1\n"
#~ "is unknown."
#~ msgstr ""
#~ "桌面项的类型\n"
#~ "%1\n"
#~ "未知。"

#~ msgid ""
#~ "The desktop entry file\n"
#~ "%1\n"
#~ "is of type FSDevice but has no Dev=... entry."
#~ msgstr ""
#~ "桌面项目文件\n"
#~ "%1\n"
#~ "是文件系统设备类型，但是没有包含 Dev=... 项目。"

#~ msgid ""
#~ "The desktop entry file\n"
#~ "%1\n"
#~ "is of type Link but has no URL=... entry."
#~ msgstr ""
#~ "桌面项目文件\n"
#~ "%1\n"
#~ "是链接类型，但是没有包含 URL=... 项。"

#~ msgid "Mount"
#~ msgstr "挂载"

#~ msgid "Eject"
#~ msgstr "弹出"

#~ msgid "Unmount"
#~ msgstr "卸载"

#~ msgid ""
#~ "Malformed URL\n"
#~ "%1"
#~ msgstr ""
#~ "不正确的 URL\n"
#~ "%1"

#~ msgid ""
#~ "URL cannot be listed\n"
#~ "%1"
#~ msgstr ""
#~ "无法列出 URL\n"
#~ "%1"

#~ msgctxt "@title:column"
#~ msgid "Name"
#~ msgstr "名称"

#~ msgctxt "@title:column"
#~ msgid "Size"
#~ msgstr "大小"

#~ msgctxt "@title:column"
#~ msgid "Date"
#~ msgstr "日期"

#~ msgctxt "@title:column"
#~ msgid "Permissions"
#~ msgstr "权限"

#~ msgctxt "@title:column"
#~ msgid "Owner"
#~ msgstr "所有者"

#~ msgctxt "@title:column"
#~ msgid "Group"
#~ msgstr "群组"

#~ msgctxt "@title:column"
#~ msgid "Type"
#~ msgstr "类型"

#~ msgid "Default"
#~ msgstr "默认"

#~ msgid "(Symbolic Link to %1)"
#~ msgstr "(到 %1 的符号链接)"

#~ msgid "(%1, Link to %2)"
#~ msgstr "(%1，链接到 %2)"

#~ msgid " (Points to %1)"
#~ msgstr " (指向：%1)"

#~ msgid "Link to %1 (%2)"
#~ msgstr "链接到 %1(%2)"

#~ msgid "Owner:"
#~ msgstr "所有者："

#~ msgid "Permissions:"
#~ msgstr "权限："

#~ msgctxt "@title:menu"
#~ msgid "&Actions"
#~ msgstr "动作(&A)"

#~ msgid "&Open with %1"
#~ msgstr "用 %1 打开(&O)"

#~ msgctxt "@title:menu"
#~ msgid "&Open With"
#~ msgstr "打开方式(&O)"

#~ msgctxt "@action:inmenu Open With"
#~ msgid "&Other..."
#~ msgstr "其它(&O)..."

#~ msgctxt "@title:menu"
#~ msgid "&Open With..."
#~ msgstr "打开方式(&O)..."

#~ msgid "Open &with %1"
#~ msgstr "用 %1 打开(&W)"

#~ msgctxt "@item:inmenu Open With, %1 is application name"
#~ msgid "%1"
#~ msgstr "%1"

#~ msgctxt "Items in a folder"
#~ msgid "1 item"
#~ msgid_plural "%1 items"
#~ msgstr[0] "%1 项"

#~ msgctxt "@info mimetype"
#~ msgid "Unknown"
#~ msgstr "未知"

#~ msgid "All Pictures"
#~ msgstr "全部图片"

#~ msgid "Mime Type"
#~ msgstr "MIME 类型"

#~ msgid "Comment"
#~ msgstr "备注"

#~ msgid "Patterns"
#~ msgstr "模式"

#~ msgid "&Edit..."
#~ msgstr "编辑(&E)..."

#~ msgid "Click this button to display the familiar KDE mime type editor."
#~ msgstr "单击此按钮来显示熟悉的 KDE MIME 类型编辑器。"

#~ msgid ""
#~ "<qt>Unable to enter <b>%1</b>.\n"
#~ "You do not have access rights to this location.</qt>"
#~ msgstr ""
#~ "<qt>无法进入 <b>%1</b>。\n"
#~ "您没有到这个位置的访问权。</qt>"

#~ msgid ""
#~ "<qt>The file <b>%1</b> is an executable program. For safety it will not "
#~ "be started.</qt>"
#~ msgstr "<qt>文件 <b>%1</b> 是可执行程序。为安全起见，不会启动该程序。</qt>"

#~ msgid "<qt>You do not have permission to run <b>%1</b>.</qt>"
#~ msgstr "<qt>您没有运行 <b>%1</b> 的权限。</qt>"

#~ msgid "You are not authorized to select an application to open this file."
#~ msgstr "您没有被授权选择应用程序打开此文件。"

#~ msgid "Open with:"
#~ msgstr "打开方式："

#~ msgid "You are not authorized to execute this file."
#~ msgstr "您没有被授权执行此文件。"

#~ msgid "Launching %1"
#~ msgstr "启动 %1"

#~ msgid "Error processing Exec field in %1"
#~ msgstr "在 %1 中处理 Exec 字段出错"

#~ msgid "You are not authorized to execute this service."
#~ msgstr "您没有被授权执行此服务。"

#~ msgctxt "Warning about executing unknown .desktop file"
#~ msgid "Warning"
#~ msgstr "警告"

#~ msgctxt "program name follows in a line edit below"
#~ msgid "This will start the program:"
#~ msgstr "这将启动此程序："

#~ msgid "If you do not trust this program, click Cancel"
#~ msgstr "如果您不信任此程序，请单击取消"

#~ msgid "Unable to make the service %1 executable, aborting execution"
#~ msgstr "无法执行 %1 服务，已放弃"

#~ msgid ""
#~ "<qt>Unable to run the command specified. The file or folder <b>%1</b> "
#~ "does not exist.</qt>"
#~ msgstr "<qt>无法运行指定的命令。文件或文件夹 <b>%1</b> 不存在。</qt>"

#~ msgid "Could not find the program '%1'"
#~ msgstr "找不到程序“%1”"

#~ msgid "Acquire Image"
#~ msgstr "采集图像"

#~ msgid "OCR Image"
#~ msgstr "OCR 图像"

#~ msgid "The desktop is offline"
#~ msgstr "桌面脱机"

#~ msgid "File '%1' is not readable"
#~ msgstr "文件“%1”不可读"

#~ msgid "ERROR: Unknown protocol '%1'"
#~ msgstr "错误：未知的协议“%1”"

#~ msgid "Authorization Dialog"
#~ msgstr "授权对话框"

#~ msgid "Filename for clipboard content:"
#~ msgstr "用于剪贴板内容的文件名："

#~ msgid "%1 (%2)"
#~ msgstr "%1 (%2)"

#~ msgid ""
#~ "The clipboard has changed since you used 'paste': the chosen data format "
#~ "is no longer applicable. Please copy again what you wanted to paste."
#~ msgstr ""
#~ "剪贴板自您使用“粘贴”之后已经发生了更改：所选的数据格式无法再接受。请再次复"
#~ "制您想要粘贴的内容。"

#~ msgid "The clipboard is empty"
#~ msgstr "剪贴板是空的"

#~ msgid "&Paste File"
#~ msgid_plural "&Paste %1 Files"
#~ msgstr[0] "粘贴 %1 个文件(&P)"

#~ msgid "&Paste URL"
#~ msgid_plural "&Paste %1 URLs"
#~ msgstr[0] "粘贴 %1 个 URL(&P)"

#~ msgid "&Paste Clipboard Contents"
#~ msgstr "粘贴剪贴板内容(&P)"

#~ msgid "Data format:"
#~ msgstr "数据格式："

#~ msgid "Appl&y to All"
#~ msgstr "应用于全体(&Y)"

#~ msgid ""
#~ "When this is checked the button pressed will be applied to all subsequent "
#~ "folder conflicts for the remainder of the current job.\n"
#~ "Unless you press Skip you will still be prompted in case of a conflict "
#~ "with an existing file in the directory."
#~ msgstr ""
#~ "如果点击此按钮，此选项将被应用到当前任务中所有剩下的含有冲突的文件夹。\n"
#~ "除非您点击“跳过”，否则您还会再次看到相关的冲突提示。"

#~ msgid ""
#~ "When this is checked the button pressed will be applied to all subsequent "
#~ "conflicts for the remainder of the current job."
#~ msgstr ""
#~ "如果点击此按钮，此选项将被应用到当前任务中所有剩下的含有冲突的文件夹。"

#~ msgid "&Rename"
#~ msgstr "重命名(&R)"

#~ msgid "Suggest New &Name"
#~ msgstr "建议新名称(&N)"

#~ msgid "&Skip"
#~ msgstr "跳过(&S)"

#~ msgid "Do not copy or move this folder, skip to the next item instead"
#~ msgstr "不要复制或移动此文件夹，请跳至下一项"

#~ msgid "Do not copy or move this file, skip to the next item instead"
#~ msgstr "不要复制或移动此文件，请跳至下一项"

#~ msgctxt "Write files into an existing folder"
#~ msgid "&Write Into"
#~ msgstr "写入(&W)"

#~ msgid "&Overwrite"
#~ msgstr "覆盖(&O)"

#~ msgid ""
#~ "Files and folders will be copied into the existing directory, alongside "
#~ "its existing contents.\n"
#~ "You will be prompted again in case of a conflict with an existing file in "
#~ "the directory."
#~ msgstr ""
#~ "文件和文件夹将被复制到已经存在的目录，目录里面已经有一些内容。\n"
#~ "如果在一个目录内产生同名文件冲突，您将会再次看到相关提示。"

#~ msgid "&Resume"
#~ msgstr "续传(&R)"

#~ msgid ""
#~ "This action would overwrite '%1' with itself.\n"
#~ "Please enter a new file name:"
#~ msgstr ""
#~ "这个动作将用它自身来覆盖“%1”。\n"
#~ "请输入新文件名："

#~ msgid "C&ontinue"
#~ msgstr "继续(&O)"

#~ msgid "This action will overwrite the destination."
#~ msgstr "这个动作将覆盖目标。"

#~ msgid "Source"
#~ msgstr "源"

#~ msgid "Destination"
#~ msgstr "目的"

#~ msgid "Warning, the destination is more recent."
#~ msgstr "警告，目标较新。"

#~ msgid "An older item named '%1' already exists."
#~ msgstr "已经存在一个名为“%1”的旧项目。"

#~ msgid "A similar file named '%1' already exists."
#~ msgstr "名为“%1”的类似文件已存在。"

#~ msgid "A more recent item named '%1' already exists."
#~ msgstr "已经存在一个名为“%1”的较新项目。"

#~ msgid "Rename:"
#~ msgstr "重命名："

#~ msgid "Information"
#~ msgstr "信息"

#~ msgid "Skip"
#~ msgstr "跳过"

#~ msgid "AutoSkip"
#~ msgstr "自动跳过"

#~ msgid "Unknown protocol '%1'."
#~ msgstr "未知的协议“%1”。"

#~ msgid "Can not find io-slave for protocol '%1'."
#~ msgstr "找不到协议“%1”使用的输入输出后端。"

#~ msgid "Cannot talk to klauncher: %1"
#~ msgstr "无法和 klauncher 通信：%1"

#~ msgid ""
#~ "Unable to create io-slave:\n"
#~ "klauncher said: %1"
#~ msgstr ""
#~ "无法创建输入输出后端：\n"
#~ "klauncher 消息：%1"

#~ msgid "&Yes"
#~ msgstr "是(&Y)"

#~ msgid "&No"
#~ msgstr "否(&N)"

#~ msgid "&Details"
#~ msgstr "细节(&D)"

#~ msgid "&Forever"
#~ msgstr "永远(&F)"

#~ msgid "Co&ntinue"
#~ msgstr "继续(&N)"

#~ msgid "&Current Session only"
#~ msgstr "仅当前会话(&C)"

#~ msgid ""
#~ "You are about to leave secure mode. Transmissions will no longer be "
#~ "encrypted.\n"
#~ "This means that a third party could observe your data in transit."
#~ msgstr ""
#~ "您即将离开安全模式，数据传输将不再加密。\n"
#~ "这意味着第三方有可能查看到您传输的数据。"

#~ msgid "Security Information"
#~ msgstr "安全信息"

#~ msgid "C&ontinue Loading"
#~ msgstr "继续载入(&O)"

#~ msgctxt "%1 is a host name"
#~ msgid "%1: SSL negotiation failed"
#~ msgstr "%1：SSL 协商失败"

#~ msgid ""
#~ "You are about to enter secure mode. All transmissions will be encrypted "
#~ "unless otherwise noted.\n"
#~ "This means that no third party will be able to easily observe your data "
#~ "in transit."
#~ msgstr ""
#~ "您即将进入安全模式。除非另外注明，所有的传输将会被加密。\n"
#~ "这表示第三方将不能轻易查看您传输的数据。"

#~ msgid "Display SSL &Information"
#~ msgstr "显示 SSL 信息(&I)"

#~ msgid "C&onnect"
#~ msgstr "连接(&O)"

#~ msgid "Enter the certificate password:"
#~ msgstr "输入证书的密码："

#~ msgid "SSL Certificate Password"
#~ msgstr "SSL 证书密码"

#~ msgid "Unable to open the certificate. Try a new password?"
#~ msgstr "无法打开证书。试用新密码吗？"

#~ msgid "The procedure to set the client certificate for the session failed."
#~ msgstr "为会话设置客户端证书的过程失败。"

#~ msgid ""
#~ "The server failed the authenticity check (%1).\n"
#~ "\n"
#~ msgstr ""
#~ "服务器没有通过真实性检查 (%1)。\n"
#~ "\n"

#~ msgid "Server Authentication"
#~ msgstr "服务器验证"

#~ msgid ""
#~ "Would you like to accept this certificate forever without being prompted?"
#~ msgstr "您希望以后不提示就接受该证书吗？"

#~ msgid ""
#~ "You have indicated that you wish to accept this certificate, but it is "
#~ "not issued to the server who is presenting it. Do you wish to continue "
#~ "loading?"
#~ msgstr ""
#~ "您已表明要接受该证书，但是它不是颁发给出示它的服务器的证书。您想继续载入"
#~ "吗？"

#~ msgid ""
#~ "SSL certificate is being rejected as requested. You can disable this in "
#~ "the KDE System Settings."
#~ msgstr "SSL 证书将按要求被拒绝。您可以在 KDE 系统设置中禁用此选项。"

#~ msgid "Common name:"
#~ msgstr "通用名称："

#~ msgid "Acme Co."
#~ msgstr "Acme Co."

#~ msgid "Organization:"
#~ msgstr "组织："

#~ msgid "Acme Sundry Products Company"
#~ msgstr "Acme 杂货公司"

#~ msgid "Organizational unit:"
#~ msgstr "组织单位："

#~ msgid "Fraud Department"
#~ msgstr "Fraud 部门"

#~ msgid "Country:"
#~ msgstr "国家："

#~ msgid "Canada"
#~ msgstr "加拿大"

#~ msgid "State:"
#~ msgstr "州："

#~ msgid "Quebec"
#~ msgstr "魁北克"

#~ msgid "City:"
#~ msgstr "城市："

#~ msgid "Lakeridge Meadows"
#~ msgstr "Lakeridge 牧场"

#~ msgid "Organization / Common Name"
#~ msgstr "组织 / 通用名称"

#~ msgid "Organizational Unit"
#~ msgstr "组织单位"

#~ msgid "Display..."
#~ msgstr "显示..."

#~ msgid "Disable"
#~ msgstr "禁用"

#~ msgid "Enable"
#~ msgstr "启用"

#~ msgid "System certificates"
#~ msgstr "系统证书"

#~ msgid "User-added certificates"
#~ msgstr "用户添加的证书"

#~ msgid "Pick Certificates"
#~ msgstr "拾取证书"

#~ msgid "<b>Subject Information</b>"
#~ msgstr "<b>主题信息</b>"

#~ msgid "<b>Issuer Information</b>"
#~ msgstr "<b>发行者信息</b>"

#~ msgid "<b>Other</b>"
#~ msgstr "<b>其它</b>"

#~ msgid "Validity period"
#~ msgstr "有效期"

#~ msgid "Serial number"
#~ msgstr "序列号"

#~ msgid "MD5 digest"
#~ msgstr "MD5 摘要"

#~ msgid "SHA1 digest"
#~ msgstr "SHA1 摘要"

#~ msgctxt "%1 is the effective date of the certificate, %2 is the expiry date"
#~ msgid "%1 to %2"
#~ msgstr "%1 至 %2"

#~ msgid "SSL Configuration Module"
#~ msgstr "SSL 配置模块"

#~ msgid "Copyright 2010 Andreas Hartmetz"
#~ msgstr "版权 2010 Andreas Hartmetz"

#~ msgid "Andreas Hartmetz"
#~ msgstr "Andreas Hartmetz"

#~ msgid "SSL Signers"
#~ msgstr "SSL 签名者"

#~ msgid ""
#~ "You have indicated that you wish to obtain or purchase a secure "
#~ "certificate. This wizard is intended to guide you through the procedure. "
#~ "You may cancel at any time, and this will abort the transaction."
#~ msgstr ""
#~ "您已经表明您想要获得或者购买安全证书。此向导将会引导您完成这个过程。您可在"
#~ "任何时候取消，从而中止此项事务。"

#~ msgid ""
#~ "You must now provide a password for the certificate request. Please "
#~ "choose a very secure password as this will be used to encrypt your "
#~ "private key."
#~ msgstr ""
#~ "您必须现在就为证书请求提供一个密码。请选择非常安全的密码，因为该密码会用于"
#~ "加密您的私人密钥。"

#~ msgid "&Repeat password:"
#~ msgstr "重复密码(&R)："

#~ msgid "&Choose password:"
#~ msgstr "选择密码(&C)："

#~ msgid "Certificate"
#~ msgstr "证书"

#~ msgid "Save selection for this host."
#~ msgstr "为该主机保存选择。"

#~ msgid "Send certificate"
#~ msgstr "发送证书"

#~ msgid "Do not send a certificate"
#~ msgstr "不要发送证书"

#~ msgid "KDE SSL Certificate Dialog"
#~ msgstr "KDE SSL 证书对话"

#~ msgid ""
#~ "The server <b>%1</b> requests a certificate.<br /><br />Select a "
#~ "certificate to use from the list below:"
#~ msgstr ""
#~ "服务器 <b>%1</b> 请求证书。<br /><br />请从下面的列表中选择要使用的证书："

#~ msgid "Signature Algorithm: "
#~ msgstr "签名算法："

#~ msgid "Unknown"
#~ msgstr "未知"

#~ msgid "Signature Contents:"
#~ msgstr "签名内容："

#~ msgctxt "Unknown"
#~ msgid "Unknown key algorithm"
#~ msgstr "未知的密钥算法"

#~ msgid "Key type: RSA (%1 bit)"
#~ msgstr "密钥类型：RSA (%1 位)"

#~ msgid "Modulus: "
#~ msgstr "模："

#~ msgid "Exponent: 0x"
#~ msgstr "幂：0x"

#~ msgid "Key type: DSA (%1 bit)"
#~ msgstr "密钥类型：DSA (%1 位)"

#~ msgid "Prime: "
#~ msgstr "质数："

#~ msgid "160 bit prime factor: "
#~ msgstr "160 位质数因子："

#~ msgid "Public key: "
#~ msgstr "公钥："

#~ msgid "The certificate is valid."
#~ msgstr "证书有效。"

#~ msgid ""
#~ "Retrieval of the issuer certificate failed. This means the CA's "
#~ "(Certificate Authority) certificate can not be found."
#~ msgstr "检索证书发行方失败。这意味着找不到 CA(认证机构)的证书。"

#~ msgid ""
#~ "Retrieval of the CRL (Certificate Revocation List) failed. This means the "
#~ "CA's (Certificate Authority) CRL can not be found."
#~ msgstr ""
#~ "检索 CRL(证书吊销列表)失败。这意味着找不到 CA(认证机构)的 CRL(证书吊销列"
#~ "表)。"

#~ msgid ""
#~ "The decryption of the certificate's signature failed. This means it could "
#~ "not even be calculated as opposed to just not matching the expected "
#~ "result."
#~ msgstr "证书签名解密失败。这意味着无法求得和预期匹配的反向计算结果。"

#~ msgid ""
#~ "The decryption of the CRL's (Certificate Revocation List) signature "
#~ "failed. This means it could not even be calculated as opposed to just not "
#~ "matching the expected result."
#~ msgstr ""
#~ "CRL(证书吊销列表)签名解密失败。这意味着无法求得和预期匹配的反向计算结果。"

#~ msgid ""
#~ "The decoding of the public key of the issuer failed. This means that the "
#~ "CA's (Certificate Authority) certificate can not be used to verify the "
#~ "certificate you wanted to use."
#~ msgstr "发行方公钥解码失败。这意味着 CA(认证机构)的证书无法被用于校验证书。"

#~ msgid ""
#~ "The certificate's signature is invalid. This means that the certificate "
#~ "can not be verified."
#~ msgstr "证书的签名无效，无法校验证书。"

#~ msgid ""
#~ "The CRL's (Certificate Revocation List) signature is invalid. This means "
#~ "that the CRL can not be verified."
#~ msgstr "CRL(证书吊销列表)的签名无效，无法校验 CRL。"

#~ msgid "The certificate is not valid, yet."
#~ msgstr "证书目前无效。"

#~ msgid "The certificate is not valid, any more."
#~ msgstr "证书已经失效。"

#~ msgid "The CRL (Certificate Revocation List) is not valid, yet."
#~ msgstr "CRL(证书吊销列表)目前无效。"

#~ msgid "The time format of the certificate's 'notBefore' field is invalid."
#~ msgstr "证书上“notBefore”字段里的时间格式无效。"

#~ msgid "The time format of the certificate's 'notAfter' field is invalid."
#~ msgstr "证书上“notAfter”字段里的时间格式无效。"

#~ msgid ""
#~ "The time format of the CRL's (Certificate Revocation List) 'lastUpdate' "
#~ "field is invalid."
#~ msgstr "CRL(证书吊销列表)上“lastUpdate”字段里的时间格式无效。"

#~ msgid ""
#~ "The time format of the CRL's (Certificate Revocation List) 'nextUpdate' "
#~ "field is invalid."
#~ msgstr "CRL(证书吊销列表)上“nextUpdate”字段里的时间格式无效。"

#~ msgid "The OpenSSL process ran out of memory."
#~ msgstr "OpenSSL 进程运行所需的内存不足。"

#~ msgid ""
#~ "The certificate is self-signed and not in the list of trusted "
#~ "certificates. If you want to accept this certificate, import it into the "
#~ "list of trusted certificates."
#~ msgstr ""
#~ "此证书是自签名的，且不在信任证书列表中。如果您想要接受此证书，请将它导入到"
#~ "信任证书列表内。"

#~ msgid ""
#~ "The certificate is self-signed. While the trust chain could be built up, "
#~ "the root CA's (Certificate Authority) certificate can not be found."
#~ msgstr "此证书是自签名的。无法构建其信任链，找不到根 CA(证书机构)的证书。"

#~ msgid ""
#~ "The CA's (Certificate Authority) certificate can not be found. Most "
#~ "likely, your trust chain is broken."
#~ msgstr "找不到 CA(证书机构)的证书。最大可能是因为您的信任链已经损坏。"

#~ msgid ""
#~ "The certificate can not be verified as it is the only certificate in the "
#~ "trust chain and not self-signed. If you self-sign the certificate, make "
#~ "sure to import it into the list of trusted certificates."
#~ msgstr ""
#~ "此证书无法被校验，因为它是信任链中唯一的证书，且没有自签名。如果您自行签名"
#~ "了此证书，请确保将它导入到信任证书列表中。"

#~ msgid "The certificate chain is longer than the maximum depth specified."
#~ msgstr "证书链超出规范所限的最大深度。"

#~ msgid "The certificate has been revoked."
#~ msgstr "证书已被吊销。"

#~ msgid "The certificate's CA (Certificate Authority) is invalid."
#~ msgstr "证书的 CA(认证机构)无效。"

#~ msgid ""
#~ "The length of the trust chain exceeded one of the CA's (Certificate "
#~ "Authority) 'pathlength' parameters, making all subsequent signatures "
#~ "invalid."
#~ msgstr ""
#~ "证书链的长度超出了 CA(认证机构)给定的“pathlength”参数值，这已使得所有后续"
#~ "签名失效。"

#~ msgid ""
#~ "The certificate has not been signed for the purpose you tried to use it "
#~ "for. This means the CA (Certificate Authority) does not allow this usage."
#~ msgstr ""
#~ "未对您尝试用作特定目的的证书附加签名。这意味着 CA(认证机构)不允许此用法。"

#~ msgid ""
#~ "The root CA (Certificate Authority) is not trusted for the purpose you "
#~ "tried to use this certificate for."
#~ msgstr "根 CA(认证机构)不信任您尝试使用此证书的目的。"

#~ msgid ""
#~ "The root CA (Certificate Authority) has been marked to be rejected for "
#~ "the purpose you tried to use it for."
#~ msgstr "根 CA(认证机构)已标记为拒绝您尝试使用此证书的目的。"

#~ msgid ""
#~ "The certificate's CA (Certificate Authority) does not match the CA name "
#~ "of the certificate."
#~ msgstr "证书 CA(认证机构)的名称和给证书命名的 CA 名称不匹配。"

#~ msgid ""
#~ "The CA (Certificate Authority) certificate's key ID does not match the "
#~ "key ID in the 'Issuer' section of the certificate you are trying to use."
#~ msgstr ""
#~ "CA(认证机构)的证书密钥 ID 和您尝试使用的证书上“Issuer”字段里的密钥 ID 不匹"
#~ "配。"

#~ msgid ""
#~ "The CA (Certificate Authority) certificate's key ID and name do not match "
#~ "the key ID and name in the 'Issuer' section of the certificate you are "
#~ "trying to use."
#~ msgstr ""
#~ "CA(认证机构)的证书密钥 ID 和名称和您尝试使用的证书上“Issuer”字段里的密钥 "
#~ "ID 和名称不匹配。"

#~ msgid ""
#~ "The certificate's CA (Certificate Authority) is not allowed to sign "
#~ "certificates."
#~ msgstr "证书 CA(认证机构)未被授权签发证书。"

#~ msgid "OpenSSL could not be verified."
#~ msgstr "无法校验 OpenSSL。"

#~ msgid ""
#~ "The signature test for this certificate failed. This could mean that the "
#~ "signature of this certificate or any in its trust path are invalid, could "
#~ "not be decoded or that the CRL (Certificate Revocation List) could not be "
#~ "verified. If you see this message, please let the author of the software "
#~ "you are using know that he or she should use the new, more specific error "
#~ "messages."
#~ msgstr ""
#~ "对此证书的签名测试失败。这可能意味着此证书的签名或其信任路径无效、无法解码"
#~ "证书或无法校验 CRL(证书吊销列表)。如果您看到此信息，请向目前所用软件的作者"
#~ "告知他/她应该使用更新更规范化的错误信息。"

#~ msgid ""
#~ "This certificate, any in its trust path or its CA's (Certificate "
#~ "Authority) CRL (Certificate Revocation List) is not valid. Any of them "
#~ "could not be valid yet or not valid any more. If you see this message, "
#~ "please let the author of the software you are using know that he or she "
#~ "should use the new, more specific error messages."
#~ msgstr ""
#~ "证书的信任路径中有某一段或其 CA(认证机构)的 CRL(证书吊销列表)无效或已经失"
#~ "效。如果您看到此信息，请向目前所用软件的作者告知他/她应该使用更新更规范化"
#~ "的错误信息。"

#~ msgid ""
#~ "Certificate signing authority root files could not be found so the "
#~ "certificate is not verified."
#~ msgstr "找不到证书签名权威根文件，证书没有被校验。"

#~ msgid "SSL support was not found."
#~ msgstr "没有 SSL 支持。"

#~ msgid "Private key test failed."
#~ msgstr "密钥测试失败。"

#~ msgid "The certificate has not been issued for this host."
#~ msgstr "证书未办发给此主机。"

#~ msgid "This certificate is not relevant."
#~ msgstr "此证书不相关。"

#~ msgid "The certificate is invalid."
#~ msgstr "证书无效。"

#~ msgid "KDE SSL Information"
#~ msgstr "KDE SSL 信息"

#~ msgctxt "The receiver of the SSL certificate"
#~ msgid "Subject"
#~ msgstr "主体"

#~ msgctxt "The authority that issued the SSL certificate"
#~ msgid "Issuer"
#~ msgstr "颁发者"

#~ msgid "Current connection is secured with SSL."
#~ msgstr "当前连接使用安全的 SSL。"

#~ msgid "Current connection is not secured with SSL."
#~ msgstr "当前连接没有使用安全的 SSL。"

#~ msgid "SSL support is not available in this build of KDE."
#~ msgstr "这个编译版本的 KDE 不包含 SSL 支持。"

#~ msgid ""
#~ "The main part of this document is secured with SSL, but some parts are "
#~ "not."
#~ msgstr "该文档的主要部分使用安全的 SSL，但是某些部分没有使用。"

#~ msgid "Some of this document is secured with SSL, but the main part is not."
#~ msgstr "该文档的某些部分使用安全的 SSL，但是主要部分没有使用。"

#~ msgctxt "%1, using %2 bits of a %3 bit key"
#~ msgid "%1, %2 %3"
#~ msgstr "%1，%2 %3"

#~ msgctxt "Part of: %1, using %2 bits of a %3 bit key"
#~ msgid "using %1 bit"
#~ msgid_plural "using %1 bits"
#~ msgstr[0] "使用 %1 位"

#~ msgctxt "Part of: %1, using %2 bits of a %3 bit key"
#~ msgid "of a %1 bit key"
#~ msgid_plural "of a %1 bit key"
#~ msgstr[0] "于 %1 位密钥"

#~ msgctxt "The certificate is not trusted"
#~ msgid "NO, there were errors:"
#~ msgstr "否，错误信息："

#~ msgctxt "The certificate is trusted"
#~ msgid "Yes"
#~ msgstr "是"

#~ msgid "KDE Certificate Request"
#~ msgstr "KDE 证书请求"

#~ msgid "KDE Certificate Request - Password"
#~ msgstr "KDE 证书请求 - 密码"

#~ msgid "Unsupported key size."
#~ msgstr "不支持的密钥大小。"

#~ msgid "KDE"
#~ msgstr "KDE"

#~ msgid "Please wait while the encryption keys are generated..."
#~ msgstr "请稍候，正在生成加密密钥..."

#~ msgid "Do you wish to store the passphrase in your wallet file?"
#~ msgstr "您是否想要在钱包文件中存储密码句？"

#~ msgid "Store"
#~ msgstr "存储"

#~ msgid "Do Not Store"
#~ msgstr "不存储"

#~ msgid "2048 (High Grade)"
#~ msgstr "2048 (高级)"

#~ msgid "1024 (Medium Grade)"
#~ msgstr "1024 (中级)"

#~ msgid "768  (Low Grade)"
#~ msgstr "768 (低级)"

#~ msgid "512  (Low Grade)"
#~ msgstr "512 (低级)"

#~ msgid "No SSL support."
#~ msgstr "不支持 SSL。"

#~ msgid "Certificate password"
#~ msgstr "证书密码"

#~ msgid "GMT"
#~ msgstr "GMT"

#~ msgid "[padlock]"
#~ msgstr "[数字键盘锁定]"

#~ msgctxt "Web page address"
#~ msgid "Address:"
#~ msgstr "地址："

#~ msgid "IP address:"
#~ msgstr "IP 地址："

#~ msgid "Encryption:"
#~ msgstr "加密："

#~ msgid "Details:"
#~ msgstr "细节："

#~ msgid "SSL version:"
#~ msgstr "SSL 版本："

#~ msgid "Certificate chain:"
#~ msgstr "证书链："

#~ msgid "Trusted:"
#~ msgstr "已信任："

#~ msgid "Validity period:"
#~ msgstr "有效期："

#~ msgid "Serial number:"
#~ msgstr "序列号："

#~ msgid "MD5 digest:"
#~ msgstr "MD5 摘要："

#~ msgid "SHA1 digest:"
#~ msgstr "SHA1 摘要："

#~ msgid ""
#~ "The remote host did not send any SSL certificates.\n"
#~ "Aborting because the identity of the host cannot be established."
#~ msgstr ""
#~ "远程主机没有发送任何 SSL 证书。\n"
#~ "因此无法和主机建立验证连接，操作已经取消。"

#~ msgid "KMailService"
#~ msgstr "KMailService"

#~ msgid "Mail service"
#~ msgstr "邮件服务"

#~ msgid "Could not find a usable proxy configuration script"
#~ msgstr "找不到可用的代理配置脚本"

#~ msgid ""
#~ "Could not download the proxy configuration script:\n"
#~ "%1"
#~ msgstr ""
#~ "无法下载代理配置脚本：\n"
#~ "%1"

#~ msgid "Could not download the proxy configuration script"
#~ msgstr "无法下载代理配置脚本"

#~ msgid ""
#~ "The proxy configuration script is invalid:\n"
#~ "%1"
#~ msgstr ""
#~ "代理配置脚本无效：\n"
#~ "%1"

#~ msgid ""
#~ "The proxy configuration script returned an error:\n"
#~ "%1"
#~ msgstr ""
#~ "代理配置脚本返回了错误：\n"
#~ "%1"

#~ msgid "Could not find 'FindProxyForURL' or 'FindProxyForURLEx'"
#~ msgstr "找不到“FindProxyForURL”或“FindProxyForURLEx”"

#~ msgid "Got an invalid reply when calling %1"
#~ msgstr "调用 %1 时得到无效的响应"

#~ msgid "Error connecting to server."
#~ msgstr "连接到服务器时发生错误。"

#~ msgid "Not connected."
#~ msgstr "没有连接。"

#~ msgid "Connection timed out."
#~ msgstr "连接超时。"

#~ msgid "Time out waiting for server interaction."
#~ msgstr "在等待服务器响应时超时。"

#~ msgid "Server said: \"%1\""
#~ msgstr "服务器消息：“%1”"

#~ msgid "KSendBugMail"
#~ msgstr "KSendBugMail"

#~ msgid "Sends a bug report by email"
#~ msgstr "通过邮件发送错误报告"

#~ msgid "(c) 2000 Stephan Kulow"
#~ msgstr "(c) 2000 Stephan Kulow"

#~ msgid "Stephan Kulow"
#~ msgstr "Stephan Kulow"

#~ msgid "Author"
#~ msgstr "作者"

#~ msgid "Subject line"
#~ msgstr "主题行"

#~ msgid "Recipient"
#~ msgstr "收件人"

#~ msgid "telnet service"
#~ msgstr "Telnet 服务"

#~ msgid "telnet protocol handler"
#~ msgstr "Telnet 协议处理程序"

#~ msgid "You do not have permission to access the %1 protocol."
#~ msgstr "您可能没有访问 %1 协议的权限。"

#~ msgid "Could not read %1"
#~ msgstr "无法读取 %1"

#~ msgid "Edit file type"
#~ msgstr "编辑文件类型"

#~ msgid "<html><body style=\"p {line-height: 150%}; text-align: center;\"><p>"
#~ msgstr ""
#~ "<html><body style=\"p {line-height: 150%}; text-align: center;\"><p>"

#, fuzzy
#~ msgctxt "@label: multiple cookies"
#~ msgid "You received %1 cookies from"
#~ msgstr "您收到了 %1 个 cookie，来自"

#, fuzzy
#~ msgctxt "@label: single cookie"
#~ msgid "You received a cookie from"
#~ msgstr "您收到了 %1 个 cookie，来自"

#~ msgid "'Put' job did not send canResume or 'Get' job did not send data!"
#~ msgstr "“Put”任务未发送 canResume 或者“Get”任务未发送数据！"

#~ msgid "The specified folder already exists."
#~ msgstr "指定的文件夹已经存在。"

#~ msgid "Retrieving from %1..."
#~ msgstr "正在从 %1 中获取..."

#~ msgid "A newer item named '%1' already exists."
#~ msgstr "已经存在一个名为“%1”的较新项目。"
