FW: DTN Setup On Arm [ Gumstix ]

Received: from n19.bullet.mail.mud.yahoo.com (n19.bullet.mail.mud.yahoo.com [68.142.206.146]) by maillists.intel-research.net (8.13.8/8.13.8) with SMTP id o4QHY8WN028353 for ; Wed, 26 May 2010 10:34:09 -0700 Received: from [68.142.200.227] by n19.bullet.mail.mud.yahoo.com with NNFMP; 26 May 2010 17:34:08 -0000 Received: from [66.196.114.79] by t8.bullet.mud.yahoo.com with NNFMP; 26 May 2010 17:34:08 -0000 Received: from [127.0.0.1] by omp308.mail.re3.yahoo.com with NNFMP; 26 May 2010 17:34:08 -0000 X-Yahoo-Newman-Property: ymail-3 X-Yahoo-Newman-Id: 695764.52004.bm@omp308.mail.re3.yahoo.com Received: (qmail 77083 invoked by uid 60001); 26 May 2010 17:34:08 -0000 Message-ID: <604762.76814.qm@web56601.mail.re3.yahoo.com> X-YMail-OSG: ORL6VJ4VM1nCqcijEg5fMmijOIab8Z.TzDuOGNbtLEaBKHX nkyaOdNA3KaxY38el4qTc9bpH6ofUcjDFCjnYFsmJRJ.LCB3JN1jbiANsTW6 dnhF.Tq5w6bJ4f8xfc.KTGPw0Q2tGkpLUxqpdi1txA2_1Apgouyq0e4B4LNg EDXE4cZzRUTF1lor2pCrL8pbCvxbZSfcC66dDCAgf98ZIejw.DDfWVkY3ePr RpFDmRXOCkSIf3zHzOdBHtwVpxuau226_kNIdKDCe8.qzUzQLdSuk7dA_Ghb ia4OzSUw2Fab2uDbjRS.wXmjwYiGQjM4ycBBS0b31 Received: from [98.108.71.33] by web56601.mail.re3.yahoo.com via HTTP; Wed, 26 May 2010 10:34:08 PDT X-Mailer: YahooMailClassic/11.0.8 YahooMailWebService/0.8.103.269680 Date: Wed, 26 May 2010 10:34:08 -0700 (PDT) From: Justin Dailey To: dtn-users@maillists.intel-research.net In-Reply-To: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1601474373-1274895248=:76814" Subject: [dtn-users] Addition to dtnbone - Shawnee State University Testbed X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 May 2010 17:34:09 -0000 --0-1601474373-1274895248=:76814 Content-Type: text/plain; charset=us-ascii We have set up a function DTN2 testbed with 8 nodes that are always available online. This is an extension of the dtnbone effort, we have made the appropriate changes on the dtnrg dtnbone wiki page. We have one server that is directly connected online acting as a gateway for the remainder of the testbed. (its domain is shawneeursamajor.org) For testbed topology, connection information, and other information regarding our testbed visit http://www.shawneeursamajor.org Justin Dailey & Zack Sims Shawnee State University - Cyber Center Research Assistants --0-1601474373-1274895248=:76814 Content-Type: text/html; charset=us-ascii

We have set up a function DTN2 testbed with 8 nodes that are always available online. This is an extension of the dtnbone effort, we have made the appropriate changes on the dtnrg dtnbone wiki page. We have one server that is directly connected online acting as a gateway for the remainder of the testbed. (its domain is shawneeursamajor.org) For testbed topology, connection information, and other information regarding our testbed visit http://www.shawneeursamajor.org

Justin Dailey & Zack Sims
Shawnee State University - Cyber Center
Research Assistants

--0-1601474373-1274895248=:76814-- Received: from scss.tcd.ie (hermes.cs.tcd.ie [134.226.32.56]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o4PAVIw6003539 for ; Tue, 25 May 2010 03:31:19 -0700 Received: from localhost (localhost [127.0.0.1]) by hermes.scss.tcd.ie (Postfix) with ESMTP id 7D5D83E4084; Tue, 25 May 2010 11:31:17 +0100 (IST) X-Virus-Scanned: Debian amavisd-new at scss.tcd.ie Received: from scss.tcd.ie ([127.0.0.1]) by localhost (scss.tcd.ie [127.0.0.1]) (amavisd-new, port 10027) with ESMTP id Lrgs7vHz05nc; Tue, 25 May 2010 11:31:16 +0100 (IST) Received: from [10.20.81.132] (unknown [86.47.217.115]) by smtp.scss.tcd.ie (Postfix) with ESMTPSA id 46D053E4082; Tue, 25 May 2010 11:31:15 +0100 (IST) Message-ID: <4BFBA6F1.8060201@cs.tcd.ie> Date: Tue, 25 May 2010 11:31:13 +0100 From: Stephen Farrell User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 Lightning/1.0b1 Thunderbird/3.0.4 MIME-Version: 1.0 To: "Akshay Uttama Nambi S N." References: <8F9228B5F890474A9E809955D59EB72AA617BC@edpc500.cedt.iisc.ernet.in> In-Reply-To: <8F9228B5F890474A9E809955D59EB72AA617BC@edpc500.cedt.iisc.ernet.in> X-Enigmail-Version: 1.0.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: dtn-users@maillists.intel-research.net Subject: Re: [dtn-users] FW: DTN Setup On Arm [ Gumstix ] X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 May 2010 10:31:19 -0000 I'd suggest that this is really a cross-compiling question and not specifically related to DTN2, so if it were me I'd head to a gumstix support list/forum/whatever and figure out how to cross-compile "hello world" and then do that for the DTN2 build. S. PS: Just saying "it didn't work" isn't likely to get much useful help. Better to say what failed to build and how when sending any mail like that to a list. On 05/25/2010 06:37 AM, Akshay Uttama Nambi S N. wrote: > > Hello , > > I'm Akshay, working in IISc,India on DTN. I have installed DTN on x86 > machines and it works very well. Thanks to DTN research group. > > However, I found there are no documents showing how to setup DTN on a > ARM platform eg. Gumstix. > > I did try ./configure for arm which went well, however, make gave me an > error. Please let me know how can i cross compile DTN for Arm. > > Thank You > > Regards, > Akshay > > > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* , and is > believed to be clean. > > > > _______________________________________________ > dtn-users mailing list > dtn-users@maillists.intel-research.net > http://maillists.intel-research.net/mailman/listinfo/dtn-users Received: from relay.iisc.ernet.in (relay.iisc.ernet.in [203.200.35.70]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o4P5Zm4q021753 for ; Mon, 24 May 2010 22:35:49 -0700 Received: from chandra.cedt.iisc.ernet.in (chandra.cedt.iisc.ernet.in [10.114.1.14]) by relay.iisc.ernet.in (8.13.1/8.13.1) with ESMTP id o4P5Vvfb019230 for ; Tue, 25 May 2010 11:01:57 +0530 Received: by chandra.cedt.iisc.ernet.in (Postfix, from userid 65534) id C4DC2FB87E; Tue, 25 May 2010 11:01:48 +0530 (IST) Received: from rashmi.cedt.iisc.ernet.in (rashmi.cedt.iisc.ernet.in [10.114.1.15]) by chandra.cedt.iisc.ernet.in (Postfix) with ESMTP id 5B26CFB87B for ; Tue, 25 May 2010 11:01:48 +0530 (IST) Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01CAFBCC.5BFFE805" X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 Date: Tue, 25 May 2010 11:07:18 +0530 Message-ID: <8F9228B5F890474A9E809955D59EB72AA617BC@edpc500.cedt.iisc.ernet.in> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: DTN Setup On Arm [ Gumstix ] Thread-Index: Acr7ypipm+GcqBW9THagawoLdM2qhQAAb6ZA From: "Akshay Uttama Nambi S N." To: X-Spambayes-Classification: ham; 0.02 X-IISc-MailScanner-Information: Please contact the ISP for more information X-IISc-MailScanner: Found to be clean X-IISc-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-1.503, required 6.5, BAYES_00 -2.60, HTML_40_50 0.50, J_CHICKENPOX_45 0.60) X-IISc-MailScanner-From: akshay@cedt.iisc.ernet.in X-Spam-Status: No Subject: [dtn-users] FW: DTN Setup On Arm [ Gumstix ] X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 May 2010 05:35:49 -0000 This is a multi-part message in MIME format. ------_=_NextPart_001_01CAFBCC.5BFFE805 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello , I'm Akshay, working in IISc,India on DTN. I have installed DTN on x86 machi= nes and it works very well. Thanks to DTN research group. However, I found there are no documents showing how to setup DTN on a ARM p= latform eg. Gumstix. I did try ./configure for arm which went well, however, make gave me an err= or. Please let me know how can i cross compile DTN for Arm. Thank You Regards, Akshay --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------_=_NextPart_001_01CAFBCC.5BFFE805 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable FW: DTN Setup On Arm [ Gumstix ]

Hello ,

I'm Akshay, working in IISc,India on DTN. I have installed DTN on x86 machi= nes and it works very well. Thanks to DTN research group.

However, I found there are no documents showing how to setup DTN on a ARM p= latform eg. Gumstix.

I did try ./configure for arm which went well, however, make gave me an err= or. Please let me know how can i cross compile DTN for Arm.

Thank You

Regards,
Akshay

--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. ------_=_NextPart_001_01CAFBCC.5BFFE805-- Received: from aa011msr.fastwebnet.it (aa011msr.fastwebnet.it [85.18.95.71]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o4I7BrWK030992 for ; Tue, 18 May 2010 00:11:53 -0700 Received: from [10.198.113.47] (10.198.113.47) by aa011msr.fastwebnet.it (8.5.016.6) id 4B829BA80B7FB738 for dtn-users@maillists.intel-research.net; Tue, 18 May 2010 09:11:56 +0200 Message-ID: <4BF23DBC.50605@lilik.it> Date: Tue, 18 May 2010 09:11:56 +0200 From: Francesco Vollero User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; it; rv:1.8.1.24) Gecko/20100228 Thunderbird/2.0.0.24 Mnenhy/0.7.6.666 MIME-Version: 1.0 To: dtn-users@maillists.intel-research.net References: <201005090130325318268@yahoo.com.cn> In-Reply-To: <201005090130325318268@yahoo.com.cn> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [dtn-users] Really Need Help with Building a Bigger DTN X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 May 2010 07:11:53 -0000 luo1020 ha scritto: > hello > I recently want to do some program with DTN2, and I have succeed > intalling the DTN-2.7.0. However, I can't make two machines to > communicate. I just followed the DTN manual and modified the dtn.conf > file, but I failed, I can't receive the message from another computer. > > Is there someone building a bigger DTN successful? Just follow the > manual? If so, please give me some advice, or tell me I did't > configure the dtn.conf file correct. I have configure this for some > time and I didn't have a clue. > > I'm fresh to the DTN, if someone can tell me his/her experience in > building a bigger DTN, I will be really appreciate. > Well, how u think we can gonna help you, if you at least dont send both nodes configuration? Provide us more information, after we can talk about help... -Francesco Received: from mail-gy0-f169.google.com (mail-gy0-f169.google.com [209.85.160.169]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o4AF0eji020911 for ; Mon, 10 May 2010 08:00:40 -0700 Received: by gyg4 with SMTP id 4so1940077gyg.28 for ; Mon, 10 May 2010 08:00:40 -0700 (PDT) MIME-Version: 1.0 Received: by 10.101.128.14 with SMTP id f14mr122296ann.46.1273503640179; Mon, 10 May 2010 08:00:40 -0700 (PDT) Received: by 10.100.8.15 with HTTP; Mon, 10 May 2010 08:00:40 -0700 (PDT) Date: Mon, 10 May 2010 11:00:40 -0400 Message-ID: From: john tuttle To: DTN-Users Content-Type: multipart/alternative; boundary=001636c597a317d7a804863eac8b Subject: Re: [dtn-users] Really Need Help with Building a Bigger DTN X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 May 2010 15:00:40 -0000 --001636c597a317d7a804863eac8b Content-Type: text/plain; charset=ISO-8859-1 luo1020, I was also looking to configure two DTN daemons to transfer bundles between 2 PC's, my config file is almost identical to yours and the example except that I'm using the default port of 4556. Initially it didn't work for me but my issue was a typo in my endpoint daemon route in the config file which I kept looking at but wasn't seeing the mistake. The way I was able to see this was by using the debug option when I started the daemon, "dtnd -c /home/dtn-test-pc/dtn/dtn.conf -l debug", once I saw that I was able to identify the typo, makes changes and send a msg successfully from one PC to the other. You might want to try the debug and see if anything pops up, also running wireshark and looking to see if anything is actually sent out of your interface might be worth something. JT --001636c597a317d7a804863eac8b Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable luo1020,

I was also looking to configure two DTN daemons to transfer= bundles between 2 PC's, my config file is almost identical to yours an= d the example except that I'm using the default port of 4556.

Initially it didn't work for me but my issue was a typo in my endpoint = daemon route in the config file which I kept looking at but wasn't seei= ng the mistake.

The way I was able to see this was by using the debu= g option when I started the daemon, "dtnd -c /home/dtn-test-pc/dtn/dtn= .conf -l debug", once I saw that I was able to identify the typo, make= s changes and send a msg successfully from one PC to the other.

You might want to try the debug and see if anything pops up, also runni= ng wireshark and looking to see if anything is actually sent out of your in= terface might be worth something.

JT

--001636c597a317d7a804863eac8b-- Received: from n20.bullet.mail.mud.yahoo.com (n20.bullet.mail.mud.yahoo.com [68.142.206.147]) by maillists.intel-research.net (8.13.8/8.13.8) with SMTP id o48Hd1FS021463 for ; Sat, 8 May 2010 10:39:02 -0700 Received: from [68.142.200.227] by n20.bullet.mail.mud.yahoo.com with NNFMP; 08 May 2010 17:39:02 -0000 Received: from [68.142.201.65] by t8.bullet.mud.yahoo.com with NNFMP; 08 May 2010 17:39:02 -0000 Received: from [127.0.0.1] by omp417.mail.mud.yahoo.com with NNFMP; 08 May 2010 17:39:02 -0000 X-Yahoo-Newman-Id: 87113.5326.bm@omp417.mail.mud.yahoo.com Received: (qmail 40316 invoked from network); 8 May 2010 17:39:01 -0000 Received: from lm (luo1020@219.224.166.136 with login) by smtp113.plus.mail.sp1.yahoo.com with SMTP; 08 May 2010 10:39:01 -0700 PDT X-Yahoo-SMTP: JpAQNNaswBCfnLBW2h5VP6OxnbM- X-YMail-OSG: iJCGmUcVM1mz2u2K.hy8dctLp8D8mWWuHKWrzxsEKZCH.uM KyFXfdFkXEnMJCsZleLj8yByFpnv2aFH6IqbDf7MdpNl1b_DToHVy_siRcGN Mb3vYocNuk5b4mmsUVbR_goUCUggDdBfjS_c.e.zFGuZ5MX9ptG01KVHwuSZ UqCGCORopCiiO3Afv22W_.DBT8hTQmB7w7ESE6yBL77xWvYqgoGF3SzcEOmj qZJTq8hfLF4.U_LuuJJ6Kit_OlLMD X-Yahoo-Newman-Property: ymail-3 Date: Sun, 9 May 2010 01:30:34 +0800 From: "luo1020" To: "dtn-users" Message-ID: <201005090130325318268@yahoo.com.cn> X-mailer: Foxmail 6, 15, 201, 22 [cn] Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====003_Dragon825481533463_=====" Subject: [dtn-users] Really Need Help with Building a Bigger DTN X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 08 May 2010 17:39:02 -0000 This is a multi-part message in MIME format. --=====003_Dragon825481533463_===== Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit hello I recently want to do some program with DTN2, and I have succeed intalling the DTN-2.7.0. However, I can't make two machines to communicate. I just followed the DTN manual and modified the dtn.conf file, but I failed, I can't receive the message from another computer. Is there someone building a bigger DTN successful? Just follow the manual? If so, please give me some advice, or tell me I did't configure the dtn.conf file correct. I have configure this for some time and I didn't have a clue. I'm fresh to the DTN, if someone can tell me his/her experience in building a bigger DTN, I will be really appreciate. Mark 2010-05-09 luo1020 --=====003_Dragon825481533463_===== Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: 7bit

hello

I recently want to do some program with DTN2, and I have succeed intalling the DTN-2.7.0. However, I can't make two machines to communicate. I just followed the DTN manual and modified the dtn.conf file, but I failed, I can't receive the message from another computer.

Is there someone building a bigger DTN successful? Just follow the manual? If so, please give me some advice, or tell me I did't configure the dtn.conf file correct. I have configure this for some time and I didn't have a clue.

I'm fresh to the DTN, if someone can tell me his/her experience in building a bigger DTN, I will be really appreciate.

Mark

2010-05-09

luo1020

--=====003_Dragon825481533463_=====-- __________________________________________________ 8O?lW"2aQE;"3,4sH]A?Cb7QSJOd? http://cn.mail.yahoo.com Received: from ch3.sourceforge.net (ch3.sourceforge.net [216.34.181.60]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o479sXF1025863 for ; Fri, 7 May 2010 02:54:33 -0700 Received: from www by sfs-web-9.v29.ch3.sourceforge.com with local (Exim 4.69) (envelope-from ) id 1OAKGP-00034F-ER; Fri, 07 May 2010 09:54:33 +0000 To: noreply@sourceforge.net From: "SourceForge.net" Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" X-SourceForge-Tracker-unixname: dtn X-SourceForge-Tracker-trackerid: 630167 X-SourceForge-Tracker-itemid: 2998095 X-SourceForge-Tracker-itemstatus: Open X-SourceForge-Tracker-itemassignee: nobody X-SourceForge-Tracker-itemupdate-reason: Tracker Item Submitted X-SourceForge-Tracker-itemupdate-username: Message-Id: Date: Fri, 07 May 2010 09:54:33 +0000 Subject: [dtn-users] [ dtn-Bugs-2998095 ] Configure when oasys is not in ../ fails. X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 07 May 2010 09:54:33 -0000 Bugs item #2998095, was opened at 2010-05-07 09:54 Message generated for change (Tracker Item Submitted) made by You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=630167&aid=2998095&group_id=101657 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v2.7 Status: Open Resolution: None Priority: 5 Private: No Submitted By: Leo Iannacone () Assigned to: Nobody/Anonymous (nobody) Summary: Configure when oasys is not in ../ fails. Initial Comment: Updated aclocal/oasys.ac in order to set right variables when oasys is not in ../ directory. How to reproduce bug: 1. Install oasys with --prefix=/usr (or what you prefer) 2. Remove (or rename) oasys source directory 3. Download dtn sources and run ./configure (without any particular arguments, or with --with-oasys if you install oasys in a directory different to /usr). Results will be: "oasys not found". This patch is with regards to Oasys, and should be applied to that source tree. Patch: --- a/aclocal/oasys.ac.orig +++ b/aclocal/oasys.ac @@ -48,7 +48,9 @@ dnl AC_OASYS_CONFIG [major] [minor] dnl AC_DEFUN(AC_OASYS_CONFIG, [ - rm -rf oasys + if test -d oasys ; then + rm -rf oasys + fi ac_oasysver_major=$1 ac_oasysver_minor=$2 @@ -61,38 +63,47 @@ ac_oasysdir=$withval) AC_MSG_CHECKING([for an oasys installation (version $ac_oasysver_major.$ac_oasysver_minor or better)]) + + ac_oaysdir_ver= - ac_oasysdir_ver=`find .. -maxdepth 1 -type d -name $ac_oasysdir_ver_base.* | tail -1` if test "$ac_oasysdir" = "" ; then - if test -d "$ac_oasysdir_ver" ; then - ac_oasysdir=$ac_oasysdir_ver - elif test -d ../oasys ; then - ac_oasysdir=../oasys - - else - ac_oasysdir=/usr - # Set the oasys paths properly. OASYS_INCDIR points to the parent - # directory containing the oasys header files or the source - # directory itself with a symlink (include/oasys -> .), - # OASYS_LIBDIR points to the directory where the libraries are. - # OASYS_ETCDIR points to where the various scripts are. - # - OASYS_INCDIR="$ac_oasysdir/include" - OASYS_LIBDIR="$ac_oasysdir/lib" - OASYS_ETCDIR="$ac_oasysdir/share/oasys" - fi - if test -d oasys ; then - rm -rf oasys - fi - mkdir oasys oasys/include - OASYS_INCDIR="oasys/include" - OASYS_LIBDIR="oasys/lib" - OASYS_ETCDIR="oasys/share" - ln -s ../../$ac_oasysdir $OASYS_INCDIR - ln -s ../$ac_oasysdir/lib $OASYS_LIBDIR - ln -s ../$ac_oasysdir $OASYS_ETCDIR - fi + # Set the oasys paths properly. OASYS_INCDIR points to the parent + # directory containing the oasys header files or the source + # directory itself with a symlink (include/oasys -> .), + # OASYS_LIBDIR points to the directory where the libraries are. + # OASYS_ETCDIR points to where the various scripts are. + # + + ac_oasysdir_ver=`find .. -maxdepth 1 -type d -name $ac_oasysdir_ver_base.* | tail -1` + + if test -d "$ac_oasysdir_ver" ; then + ac_oasysdir=$ac_oasysdir_ver + + elif test -d ../oasys ; then + ac_oasysdir=../oasys + ac_oasysdir_ver=$ac_oasysdir + fi + fi + + if test -d "$ac_oasysdir_ver" ; then + mkdir oasys oasys/include + OASYS_INCDIR="oasys/include" + OASYS_LIBDIR="oasys/lib" + OASYS_ETCDIR="oasys/share" + ln -s ../../$ac_oasysdir $OASYS_INCDIR + ln -s ../$ac_oasysdir/lib $OASYS_LIBDIR + ln -s ../$ac_oasysdir $OASYS_ETCDIR + + else + if test "$ac_oasysdir" = "" ; then + ac_oasysdir=/usr + fi + OASYS_INCDIR="$ac_oasysdir/include" + OASYS_LIBDIR="$ac_oasysdir/lib" + OASYS_ETCDIR="$ac_oasysdir/share/oasys" + fi + # if test ! -d $OASYS_INCDIR ; then echo "" AC_OASYS_CONFIG_HELP Leo Iannacone. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=630167&aid=2998095&group_id=101657 Received: from asmtpout021.mac.com (asmtpout021.mac.com [17.148.16.96]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o46GboEc008575 for ; Thu, 6 May 2010 09:37:50 -0700 MIME-version: 1.0 Content-transfer-encoding: 8BIT Content-type: text/plain; charset=utf-8 Received: from [10.181.89.0] (nat66.mia.three.co.uk [217.171.129.66]) by asmtp021.mac.com (Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit)) with ESMTPSA id <0L200046MBIXWK30@asmtp021.mac.com> for dtn-users@maillists.intel-research.net; Thu, 06 May 2010 09:37:50 -0700 (PDT) X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0 ipscore=0 phishscore=0 bulkscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx engine=5.0.0-1004140000 definitions=main-1005060102 From: Darren Long To: john tuttle , DTN-Users X-Mailer: Modest 3.1 References:

In-reply-to: Content-id: <1273163862.8401.3.camel@n900> X-MSMail-priority: Normal X-Priority: 3 Date: Thu, 06 May 2010 17:37:42 +0100 Message-id: <1273163862.8401.4.camel@n900> Subject: Re: [dtn-users] Using the NORM CL with DTN2 X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list Reply-To: Darren Long List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 06 May 2010 16:37:50 -0000 The dtnd binary does seem to link against libnorm.so - i checked with ldd. Perhaps you need to run ldconfig after copying libnorm.so to its proper home. Also, I assume that you are using the norm snapshot and not the old version. A final thought. I never use -C option with configure. Perhaps you could try without. Cheers, Darren ----- Original message ----- > Darren, > > Thanks for the input, I tried this and got no joy, still doesn't find the > NORM libraries. > > JT > > > On Wed, May 5, 2010 at 5:31 PM, Darren Long wrote: > > > I'm not sure this is required, but I'm in the habit of explicitly making > > libnorm.so (make -f Makefile.linux libnorm.so) and copying that into > > /usr/local/lib too. > > > > Also, when configuring DTN2 i use --with-norm=/usr/local/lib > > > > Hope this helps. > > > > Darren > > > > On 5 May 2010, at 21:11, john tuttle wrote: > > > > Hello, > > > > I'm attempting to build DTN2 code on an Ubuntu platform, so far things have > > gone well, I was able to build oasys & dtn w/minor issues. > > > > I would like to use the NORM convergence layer so I have followed the > > instructions in "norm_conv_layer.txt". I built the NORM code put the > > libraries (libnorm.a & libProtokit.a) in /usr/local/lib and the header file > > "normApi.h" in /usr/local/include. > > > > My next steps were to: > > > > - run ./configure -C --with-norm > > - run make > > - run make install > > > > Finally I was ready to initialize my DB with the command "dtnd -c > > /home//dtn/dtn.conf --init-db", this did not work, I got the > > following error: > > > > "invalid convergence layer norm" along with some other text listing the > > "link add" line in my dtn.conf file where I added the NORM information. > > > > I went back and reran the configure command and noted that it did not find > > the NORM libraries even though they are in the correct directory, > > /usr/local/lib. > > > > The output from the configure script shows the following for the NORM > > checking: > > > > checking whether to enable NORM convergence layer support... try > > checking whether norm libraries are available... (cached) no > > > > What have I missed? > > > > My software versions are: > > - oasys-1.4.0 > > - dtn-2.7.0 > > - norm-1.4b3 > > > > I did spend some time in the configure script but my shell skills are > > lacking. > > > > Thanks, > > > > JT > > > > _______________________________________________ > > dtn-users mailing list > > dtn-users@maillists.intel-research.net > > http://maillists.intel-research.net/mailman/listinfo/dtn-users > > > > > > Received: from n14.bullet.mail.mud.yahoo.com (n14.bullet.mail.mud.yahoo.com [68.142.206.41]) by maillists.intel-research.net (8.13.8/8.13.8) with SMTP id o46F3nPu004106 for ; Thu, 6 May 2010 08:03:50 -0700 Received: from [68.142.194.243] by n14.bullet.mail.mud.yahoo.com with NNFMP; 06 May 2010 15:03:49 -0000 Received: from [68.142.201.252] by t1.bullet.mud.yahoo.com with NNFMP; 06 May 2010 15:03:48 -0000 Received: from [127.0.0.1] by omp413.mail.mud.yahoo.com with NNFMP; 06 May 2010 15:03:34 -0000 X-Yahoo-Newman-Id: 558759.10765.bm@omp413.mail.mud.yahoo.com Received: (qmail 73911 invoked from network); 6 May 2010 15:03:34 -0000 Received: from lm (luo1020@219.224.166.136 with login) by smtp116.plus.mail.sp1.yahoo.com with SMTP; 06 May 2010 08:03:33 -0700 PDT X-Yahoo-SMTP: JpAQNNaswBCfnLBW2h5VP6OxnbM- X-YMail-OSG: szG_eLIVM1n4y6rhN.jKAFaW8J0paGX7v7BDFq.ijN7Iep1 zeralxMTTc0Qk3qQ9FGBFQX834WQnua_mcIlgAOwbvcH0Qbs_OjVI_BnqYkk 5hwH6ekVr0kTZCvkyyIsOUEIjuDSYp0DNnFcsBtQB5thQ.RojpYoPZrIzFnV NX8HYkEn9gkTOzxAW_NMmwnSrcfXyVxIep.xHnvbMV5A1MQKIQOkK18p.eDB H4zG1xaqiqhWPSpt77Zr7dCl8WVXJ0OqYJXpOKY31Rek7vmplbf7.Ts8dMkY iD7q2CilFB_sERZhcEQKQ6wWupgDqSWPvSFJgmaH.Mw-- X-Yahoo-Newman-Property: ymail-3 Date: Thu, 6 May 2010 22:55:09 +0800 From: "luo1020" To: "dtn-users" Message-ID: <201005062255075125216@yahoo.com.cn> X-mailer: Foxmail 6, 15, 201, 22 [cn] Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====003_Dragon435771832486_=====" Subject: [dtn-users] problem with building a bigger DTN X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 06 May 2010 15:03:50 -0000 This is a multi-part message in MIME format. --=====003_Dragon435771832486_===== Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, I have installed DTN2 under Fedora 12 and finished the transmission within one machine. However, when I tried to build a bigger DTN, I can't send message from one to another. I followed the manual and modified the dtn.conf file both in machine A and machine B, but when I tried to send a message from A, I can't receive it in machine B. I wonder if my config file(in machine A) below is correct: Routing: route local_eid dtn://lm.dtn (machine A's eid) interfaces: interface add tcp0 tcp local_port=4567 (machine A's port) Links: link add link_tcp 192.168.1.93:4567 ONDEMAND tcp (machine B's IP) Route: route add dtn://mark.dtn/* link_tcp (machine B's eid) I also tried to use UDP but the result was the same. I will be very very appreciate if anyone can give me some advices. 2010-05-06 luo1020 --=====003_Dragon435771832486_===== Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: 7bit

Hello,

I have installed DTN2 under Fedora 12 and finished the transmission within one machine. However, when I tried to build a bigger DTN, I can't send message from one to another.

I followed the manual and modified the dtn.conf file both in machine A and machine B, but when I tried to send a message from A, I can't receive it in machine B. I wonder if my config file(in machine A) below is correct:

Routing:

route local_eid dtn://lm.dtn (machine A's eid)

interfaces:

interface add tcp0 tcp local_port=4567 (machine A's port)

Links:

link add link_tcp 192.168.1.93:4567 ONDEMAND tcp (machine B's IP)

Route:

route add dtn://mark.dtn/* link_tcp (machine B's eid)

I also tried to use UDP but the result was the same.

I will be very very appreciate if anyone can give me some advices.

2010-05-06

luo1020

--=====003_Dragon435771832486_=====-- __________________________________________________ 8O?lW"2aQE;"3,4sH]A?Cb7QSJOd? http://cn.mail.yahoo.com Received: from mail-yw0-f190.google.com (mail-yw0-f190.google.com [209.85.211.190]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o46De6eH032415 for ; Thu, 6 May 2010 06:40:06 -0700 Received: by ywh28 with SMTP id 28so3133047ywh.28 for ; Thu, 06 May 2010 06:40:05 -0700 (PDT) MIME-Version: 1.0 Received: by 10.101.132.27 with SMTP id j27mr5266661ann.234.1273153205625; Thu, 06 May 2010 06:40:05 -0700 (PDT) Received: by 10.100.8.15 with HTTP; Thu, 6 May 2010 06:40:02 -0700 (PDT) In-Reply-To: References:

Date: Thu, 6 May 2010 09:40:02 -0400 Message-ID: From: john tuttle To: DTN-Users Content-Type: multipart/alternative; boundary=0016e68ee22391338d0485ed14ca Subject: Re: [dtn-users] Using the NORM CL with DTN2 X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 06 May 2010 13:40:06 -0000 --0016e68ee22391338d0485ed14ca Content-Type: text/plain; charset=ISO-8859-1 Darren, Thanks for the input, I tried this and got no joy, still doesn't find the NORM libraries. JT On Wed, May 5, 2010 at 5:31 PM, Darren Long wrote: > I'm not sure this is required, but I'm in the habit of explicitly making > libnorm.so (make -f Makefile.linux libnorm.so) and copying that into > /usr/local/lib too. > > Also, when configuring DTN2 i use --with-norm=/usr/local/lib > > Hope this helps. > > Darren > > On 5 May 2010, at 21:11, john tuttle wrote: > > Hello, > > I'm attempting to build DTN2 code on an Ubuntu platform, so far things have > gone well, I was able to build oasys & dtn w/minor issues. > > I would like to use the NORM convergence layer so I have followed the > instructions in "norm_conv_layer.txt". I built the NORM code put the > libraries (libnorm.a & libProtokit.a) in /usr/local/lib and the header file > "normApi.h" in /usr/local/include. > > My next steps were to: > > - run ./configure -C --with-norm > - run make > - run make install > > Finally I was ready to initialize my DB with the command "dtnd -c > /home//dtn/dtn.conf --init-db", this did not work, I got the > following error: > > "invalid convergence layer norm" along with some other text listing the > "link add" line in my dtn.conf file where I added the NORM information. > > I went back and reran the configure command and noted that it did not find > the NORM libraries even though they are in the correct directory, > /usr/local/lib. > > The output from the configure script shows the following for the NORM > checking: > > checking whether to enable NORM convergence layer support... try > checking whether norm libraries are available... (cached) no > > What have I missed? > > My software versions are: > - oasys-1.4.0 > - dtn-2.7.0 > - norm-1.4b3 > > I did spend some time in the configure script but my shell skills are > lacking. > > Thanks, > > JT > > _______________________________________________ > dtn-users mailing list > dtn-users@maillists.intel-research.net > http://maillists.intel-research.net/mailman/listinfo/dtn-users > > > --0016e68ee22391338d0485ed14ca Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Darren,

Thanks for the input, I tried this and got no joy, still doe= sn't find the NORM libraries.

JT

On Wed, May 5, 2010 at 5:31 PM, Darren Long <darren.long@mac.com> wro= te:

I'm not sure this is required, but I'm in the = habit of explicitly making libnorm.so (make -f Makefile.linux libnorm.so) a= nd copying that into /usr/local/lib too.=A0

Also, when configuring DTN2 i use --with-norm=3D/usr/local/l= ib

Hope this helps.

Darren=A0

On 5 May 2010, at = 21:11, john tuttle wrote:

Hello,

I'm attempting to build DTN2 code on an Ubuntu platform,= =20 so far things have gone well, I was able to build oasys & dtn=20 w/minor issues.

I would like to use the NORM convergence layer so I have followed the instructions in "norm_conv_layer.txt".=A0 I = built the NORM code put the libraries (libnorm.a & libProtokit.a) in=20 /usr/local/lib and the header file "normApi.h" in /usr/local/incl= ude.

My next steps were to:

- run ./configure -C --with-norm
-=20 run make
- run make install

Finally I was ready to initialize=20 my DB with the command "dtnd -c /home/<some dir>/dtn/dtn.conf=20 --init-db", this did not work, I got the following error:

"invalid convergence layer norm" along with some other text l= isting=20 the "link add" line in my dtn.conf file where I added the NORM=20 information.

I went back and reran the configure command and=20 noted that it did not find the NORM libraries even though they are in=20 the correct directory, /usr/local/lib.

The output from the configure script shows the following for the=20 NORM checking:

checking whether to enable NORM convergence layer=20 support... try
checking whether norm libraries are available...=20 (cached) no

What have I missed?

My software versions are:
-=20 oasys-1.4.0
- dtn-2.7.0
- norm-1.4b3

I did spend some time=20 in the configure script but my shell skills are lacking.

Thanks,
JT

_______________________________________________
dtn-users mailing listdtn-users@maillists.intel-research.net
http://m= aillists.intel-research.net/mailman/listinfo/dtn-users

--0016e68ee22391338d0485ed14ca-- Received: from mail-gy0-f169.google.com (mail-gy0-f169.google.com [209.85.160.169]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o45KBAGD014660 for ; Wed, 5 May 2010 13:11:10 -0700 Received: by gyg4 with SMTP id 4so2458646gyg.28 for ; Wed, 05 May 2010 13:11:10 -0700 (PDT) MIME-Version: 1.0 Received: by 10.101.115.1 with SMTP id s1mr6817131anm.165.1273090265799; Wed, 05 May 2010 13:11:05 -0700 (PDT) Received: by 10.100.8.15 with HTTP; Wed, 5 May 2010 13:11:04 -0700 (PDT) Date: Wed, 5 May 2010 16:11:04 -0400 Message-ID: From: john tuttle To: dtn-users@maillists.intel-research.net Content-Type: multipart/alternative; boundary=001636ed73df0fe65f0485de6d55 Subject: [dtn-users] Using the NORM CL with DTN2 X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 05 May 2010 20:11:10 -0000 --001636ed73df0fe65f0485de6d55 Content-Type: text/plain; charset=ISO-8859-1 Hello, I'm attempting to build DTN2 code on an Ubuntu platform, so far things have gone well, I was able to build oasys & dtn w/minor issues. I would like to use the NORM convergence layer so I have followed the instructions in "norm_conv_layer.txt". I built the NORM code put the libraries (libnorm.a & libProtokit.a) in /usr/local/lib and the header file "normApi.h" in /usr/local/include. My next steps were to: - run ./configure -C --with-norm - run make - run make install Finally I was ready to initialize my DB with the command "dtnd -c /home//dtn/dtn.conf --init-db", this did not work, I got the following error: "invalid convergence layer norm" along with some other text listing the "link add" line in my dtn.conf file where I added the NORM information. I went back and reran the configure command and noted that it did not find the NORM libraries even though they are in the correct directory, /usr/local/lib. The output from the configure script shows the following for the NORM checking: checking whether to enable NORM convergence layer support... try checking whether norm libraries are available... (cached) no What have I missed? My software versions are: - oasys-1.4.0 - dtn-2.7.0 - norm-1.4b3 I did spend some time in the configure script but my shell skills are lacking. Thanks, JT --001636ed73df0fe65f0485de6d55 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hello,

I'm attempting to build DTN2 code on an Ubuntu platform,= =20 so far things have gone well, I was able to build oasys & dtn=20 w/minor issues.

I would like to use the NORM convergence layer so I have followed the instructions in "norm_conv_layer.txt".=A0 I = built the NORM code put the libraries (libnorm.a & libProtokit.a) in=20 /usr/local/lib and the header file "normApi.h" in /usr/local/incl= ude.

My next steps were to:

- run ./configure -C --with-norm
-=20 run make
- run make install

Finally I was ready to initialize=20 my DB with the command "dtnd -c /home/<some dir>/dtn/dtn.conf=20 --init-db", this did not work, I got the following error:

"invalid convergence layer norm" along with some other text l= isting=20 the "link add" line in my dtn.conf file where I added the NORM=20 information.

I went back and reran the configure command and=20 noted that it did not find the NORM libraries even though they are in=20 the correct directory, /usr/local/lib.

The output from the configure script shows the following for the=20 NORM checking:

checking whether to enable NORM convergence layer=20 support... try
checking whether norm libraries are available...=20 (cached) no

What have I missed?

My software versions are:
-=20 oasys-1.4.0
- dtn-2.7.0
- norm-1.4b3

I did spend some time=20 in the configure script but my shell skills are lacking.

Thanks,
JT

--001636ed73df0fe65f0485de6d55-- Received: from mail-vw0-f41.google.com (mail-vw0-f41.google.com [209.85.212.41]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o44CcaW1021157 for ; Tue, 4 May 2010 05:38:36 -0700 Received: by vws16 with SMTP id 16so852502vws.28 for ; Tue, 04 May 2010 05:38:37 -0700 (PDT) MIME-Version: 1.0 Received: by 10.220.128.136 with SMTP id k8mr680016vcs.178.1272976716707; Tue, 04 May 2010 05:38:36 -0700 (PDT) Received: by 10.220.77.141 with HTTP; Tue, 4 May 2010 05:38:36 -0700 (PDT) In-Reply-To: References: <376A6E3D-6014-4F62-8D4D-18F59EF013E6@cs.tcd.ie> <4BC2F35D.2060700@cs.tcd.ie> Date: Tue, 4 May 2010 18:08:36 +0530 Message-ID: From: "Akshay S.N" To: Kevin Fall Content-Type: multipart/alternative; boundary=e0cb4e88758901b6b20485c3fdb9 Cc: "dtn-users@maillists.intel-research.net" Subject: Re: [dtn-users] How To setup DTN2 over ARM X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 12:38:37 -0000 --e0cb4e88758901b6b20485c3fdb9 Content-Type: text/plain; charset=ISO-8859-1 Hello I have installed DTN2 with x86 machines and everything is fine. However i'm not able to cross compile DTN for Arm. Please share your insights, and steps to do this. The *./configure --with-target=arm --host=i686-pc --with-cc=arm-linux-gcc --with-ccver=2.95 --with-db=/homes/melissa/local/src/zaurus/BerkeleyDB-4.2.52.NC/installed/ --with-tcl=/usr/local/tcl-arm --with-tclver=8.3* etc... command doesnt help a lot, it errors out when i do make. So please let me know how to cross compile DTN for arm. Please help us out. I think TCL and berkely DB has problems. shares the steps to get it cross compiled. Thanks, On Mon, Apr 12, 2010 at 11:23 PM, Kevin Fall wrote: > I did something along these lines: > > CC=/usr/local/arm-linux/bin/gcc > ./configure --host=i686-linux --prefix=/usr/local/arm-linux > --target=arm-linux > > > This "mostly" worked. I had to change a little here and there (given the > various sets of packages one needs) but did ultimately get something out the > other side. > > - K > > > On Apr 12, 2010, at Apr 123:18 AMPDT, Stephen Farrell wrote: > > > > > Hiya, > > > > Its not that well documented in DTN2 afaik, and I'd > > bet that no-one has time to fix that quicker than > > you'll figure it out;-) > > > > Briefly, the way it works is you first setup your > > cross-compiler for the relevant target architecture > > (that's generic gcc stuff, documented in loads of > > places), and then you do: > > > > $ ./configure --target=<> > > > > Where <> is whatever your gcc cross > > compiler expects to be there. > > > > Then just build as normal and you end up with arm > > binaries. > > > > Only other thing to mention is that its possible > > to build from one source tree with the object etc. > > for more than one target architecture, but I forget > > just how to set that up. (It does work though.) > > > > Stephen. > > > > PS: If you do figure this out, feel free to document > > it for the next person! > > > > > > On 04/12/2010 10:32 AM, Akshay S.N wrote: > >> I'm a newbie to ARM. So have no idea. little more details on how to > >> setup DTN2 on ARM will help me. > >> > >> On Mon, Apr 12, 2010 at 1:20 PM, Stephen Farrell > >> > wrote: > >> > >> Or cross-compile on the x86 using the usual autoconf stuff. That > >> works too. > >> S. > >> > >> > >> On 12 Apr 2010, at 06:52, Kurtis Heimerl >> > wrote: > >> > >> Well, I (as well as others) have just built it on an ARM linux > >> machine. It's not particularly complicated, if I remember. > >> > >> On Sun, Apr 11, 2010 at 10:49 PM, Akshay S.N > >> > > wrote: > >> > >> Hello, > >> > >> I have installed DTN2 on my x86 system and it works fine. > >> Now i want to > >> port the DTN2 stack on to arm architecture. How should i do > it. > >> > >> > >> > >> -- > >> Regards, > >> Akshay > >> > >> _______________________________________________ > >> dtn-users mailing list > >> dtn-users@maillists.intel-research.net > >> > >> > http://maillists.intel-research.net/mailman/listinfo/dtn-users > >> > >> > >> > >> _______________________________________________ > >> dtn-users mailing list > >> dtn-users@maillists.intel-research.net > >> > >> http://maillists.intel-research.net/mailman/listinfo/dtn-users > >> > >> > >> > >> > >> -- > >> Regards, > >> Akshay > > _______________________________________________ > > dtn-users mailing list > > dtn-users@maillists.intel-research.net > > http://maillists.intel-research.net/mailman/listinfo/dtn-users > > -- Regards, Akshay --e0cb4e88758901b6b20485c3fdb9 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hello

I have installed DTN2 with x86 machines and=20 everything is fine. However i'm not able to cross compile DTN for Arm.<= br>
Please share your insights, and steps to do this.

The

./configure =
--with-target=3Darm --host=3Di686-pc --with-cc=3Darm-linux-gcc --with-ccver=
=3D2.95 --with-db=3D/homes/melissa/local/src/zaurus/BerkeleyDB-4.2.52.NC/installe=
d/  --with-tcl=3D/usr/local/tcl-arm --with-tclver=3D8.3

etc... command doesnt help a lot, it errors out when i do make. S= o please let me know how to cross compile DTN for arm.

Please help us= out. I think TCL and berkely DB has problems. shares the steps to get it c= ross compiled.

Thanks,

On Mon, Apr= 12, 2010 at 11:23 PM, Kevin Fall <kfall@cs.berkeley.edu> wrote:

I did something a= long these lines:

CC=3D/usr/local/arm-linux/bin/gcc
./configure --host=3Di686-linux --prefix=3D/usr/local/arm-linux --target=3D= arm-linux

This "mostly" worked. =A0I had to change a little here and there = (given the various sets of packages one needs) but did ultimately get somet= hing out the other side.

- K

On Apr 12, 2010, at Apr 123:18 AMPDT, Stephen Farrell wrote:

>
> Hiya,
>
> Its not that well documented in DTN2 afaik, and I'd
> bet that no-one has time to fix that quicker than
> you'll figure it out;-)
>
> Briefly, the way it works is you first setup your
> cross-compiler for the relevant target architecture
> (that's generic gcc stuff, documented in loads of
> places), and then you do:
>
> =A0 $ ./configure --target=3D<<arm-linux>>
>
> Where <<arm-linux>> is whatever your gcc cross
> compiler expects to be there.
>
> Then just build as normal and you end up with arm
> binaries.
>
> Only other thing to mention is that its possible
> to build from one source tree with the object etc.
> for more than one target architecture, but I forget
> just how to set that up. (It does work though.)
>
> Stephen.
>
> PS: If you do figure this out, feel free to document
> it for the next person!
>
>
> On 04/12/2010 10:32 AM, Akshay S.N wrote:
>> I'm a newbie to ARM. So have no idea. little more details on h= ow to
>> setup DTN2 on ARM will help me.
>>
>> On Mon, Apr 12, 2010 at 1:20 PM, Stephen Farrell
>> <stephen.farrell@c= s.tcd.ie <mailto:stephe= n.farrell@cs.tcd.ie>> wrote:
>>
>> =A0 =A0Or cross-compile on the x86 using the usual autoconf stuff.= That
>> =A0 =A0works too.
>> =A0 =A0S.
>>
>>
>> =A0 =A0On 12 Apr 2010, at 06:52, Kurtis Heimerl <kheimerl@eecs.berkeley.edu
>> =A0 =A0<mailto:kh= eimerl@eecs.berkeley.edu>> wrote:
>>
>> =A0 =A0 =A0 =A0Well, I (as well as others) have just built it on a= n ARM linux
>> =A0 =A0 =A0 =A0machine. It's not particularly complicated, if = I remember.
>>
>> =A0 =A0 =A0 =A0On Sun, Apr 11, 2010 at 10:49 PM, Akshay S.N
>> =A0 =A0 =A0 =A0<aksh= ay.uttama@gmail.com <mailto:akshay.uttama@gmail.com>> wrote:
>>
>> =A0 =A0 =A0 =A0 =A0 =A0Hello,
>>
>> =A0 =A0 =A0 =A0 =A0 =A0I have installed DTN2 =A0on my x86 system a= nd it works fine.
>> =A0 =A0 =A0 =A0 =A0 =A0Now i want to
>> =A0 =A0 =A0 =A0 =A0 =A0port the DTN2 stack on to arm architecture.= How should i do it.
>>
>>
>>
>> =A0 =A0 =A0 =A0 =A0 =A0--
>> =A0 =A0 =A0 =A0 =A0 =A0Regards,
>> =A0 =A0 =A0 =A0 =A0 =A0Akshay
>>
>> =A0 =A0 =A0 =A0 =A0 =A0___________________________________________= ____
>> =A0 =A0 =A0 =A0 =A0 =A0dtn-users mailing list
>> =A0 =A0 =A0 =A0 =A0 =A0dtn-users@maillists.intel-research.net
>> =A0 =A0 =A0 =A0 =A0 =A0<mailto:dtn-users@maillists.intel-research.net> >> =A0 =A0 =A0 =A0 =A0 =A0http://maillists.intel-re= search.net/mailman/listinfo/dtn-users
>>
>>
>>
>> =A0 =A0 =A0 =A0_______________________________________________
>> =A0 =A0 =A0 =A0dtn-users mailing list
>> =A0 =A0 =A0 =A0dtn-users@maillists.intel-research.net
>> =A0 =A0 =A0 =A0<mailto:dtn-users@maillists.intel-research.net>
>> =A0 =A0 =A0 =A0http://maillists.intel-research.n= et/mailman/listinfo/dtn-users
>>
>>
>>
>>
>> --
>> Regards,
>> Akshay
> _______________________________________________
> dtn-users mailing list
> dtn-users@ma= illists.intel-research.net

> http:/= /maillists.intel-research.net/mailman/listinfo/dtn-users

--
Regards,Akshay
--e0cb4e88758901b6b20485c3fdb9-- Received: from mail-vw0-f41.google.com (mail-vw0-f41.google.com [209.85.212.41]) by maillists.intel-research.net (8.13.8/8.13.8) with ESMTP id o44CaocJ021062 for ; Tue, 4 May 2010 05:36:50 -0700 Received: by vws16 with SMTP id 16so850659vws.28 for ; Tue, 04 May 2010 05:36:51 -0700 (PDT) MIME-Version: 1.0 Received: by 10.220.107.162 with SMTP id b34mr11273019vcp.95.1272976598484; Tue, 04 May 2010 05:36:38 -0700 (PDT) Received: by 10.220.77.141 with HTTP; Tue, 4 May 2010 05:36:38 -0700 (PDT) Date: Tue, 4 May 2010 18:06:38 +0530 Message-ID: From: "Akshay S.N" To: dtn-users@maillists.intel-research.net Content-Type: multipart/alternative; boundary=00c09f8fea9bf722880485c3f5cd Subject: [dtn-users] How to Cross compile DTN2 for arm X-BeenThere: dtn-users@maillists.intel-research.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: dtn-users mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 12:36:50 -0000 --00c09f8fea9bf722880485c3f5cd Content-Type: text/plain; charset=ISO-8859-1 Hello Guys, I have installed DTN2 with x86 machines and everything is fine. However i'm not able to cross compile DTN for Arm. Please share your insights, and steps to do this. The *./configure --with-target=arm --host=i686-pc --with-cc=arm-linux-gcc --with-ccver=2.95 --with-db=/homes/melissa/local/src/zaurus/BerkeleyDB-4.2.52.NC/installed/ --with-tcl=/usr/local/tcl-arm --with-tclver=8.3* etc... command doesnt help a lot, it errors out when i do amke. So please let me know how to cross compile DTN for arm. Thanks, -- Regards, Akshay --00c09f8fea9bf722880485c3f5cd Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hello Guys,

I have installed DTN2 with x86 machines and everything i= s fine. However i'm not able to cross compile DTN for Arm.

Pleas= e share your insights, and steps to do this.

The

./configure=
 --with-target=3Darm --host=3Di686-pc --with-cc=3Darm-linux-gcc --with-ccve=
r=3D2.95 --with-db=3D/homes/melissa/local/src/zaurus/BerkeleyDB-4.2.52.NC/installed/  --with-tc=
l=3D/usr/local/tcl-arm --with-tclver=3D8.3

etc... command doesnt help a lot, it errors out when i do amke. So pl= ease let me know how to cross compile DTN for arm.

Thanks,

--
Regards,
Akshay
--00c09f8fea9bf722880485c3f5cd--