module ieee802-dot1cb-stream-identification { yang-version 1.1; namespace "urn:ieee:std:802.1Q:yang:ieee802-dot1cb-stream-identification"; prefix dot1cb-stream-identification; import ietf-interfaces { prefix if; } import ieee802-dot1cb-stream-identification-types { prefix sid-types; } organization "Institute of Electrical and Electronics Engineers"; contact "WG-URL: http://grouper.ieee.org/groups/802/1/ WG-EMail: stds-802-1@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane P.O. Box 1331 Piscataway NJ 08855-1331 USA E-mail: STDS-802-1-L@LISTSERV.IEEE.ORG"; description "Management objects that control the stream identification from IEEE Std. 802.1CB-2017"; revision 2019-09-01 { description "Initial revision. Note that this module might change in backward incompatible ways until approved as a standard."; reference "Clause 9 of IEEE Std. 802.1CB-2017"; } list stream-identity-list { key "index"; description "The Stream identity table consists of a set of tsnStreamIdEntry objects (9.1.1), each relating to a single Stream, specifying the points in the system where Stream identification functions (6.2) are to be instantiated. Each entry in the Stream identity table has a tsnStreamIdHandle object (9.1.1.1) specifying a stream_handle value and one or more tsnStreamIdEntry objects (9.1.1) describing one identification method for that Stream. If a single Stream has multiple identification methods, perhaps (but not necessarily) on different ports, then there can be multiple tsnStreamIdEntry objects with the same value for the tsnStreamIdHandle. If the HSR or PRP method or the Sequence encode/decode function is applied to a packet, then the LanId or PathId fields are also used to identify the Stream to which the packet belongs."; reference "Clause 9.1. of IEEE Std. 802.1CB-2017"; leaf index { type uint32; description "If a single Stream has multiple identification methods, perhaps (but not necessarily) on different ports, then there can be multiple tsnStreamIdEntry objects with the same value for the tsnStreamIdHandle"; } uses sid-types:tsn-stream-id-entry-group; } augment "/if:interfaces/if:interface/if:statistics" { description "The per-port, per-Stream packet counters that are kept by Stream identification functions for inspection by network management entities are described in 9.2, and the per-port (totaled over all Streams) counters in 9.3"; reference "Clause 9 of IEEE Std. 802.1CB-2017"; list stream-identification-counters { key "direction handle"; leaf direction { type sid-types:direction; description "An object indicating whether the counters apply to out-facing (True) or in-facing (False)."; } leaf handle { type leafref { path "/stream-identity-list/handle"; } description "The according tsnStreamIdHandle for these counters."; } config false; description "The following counters are instantiated for each port on which the Stream identification function (6.2) is configured. The counters are indexed by port number, facing (in-facing or out-facing), and stream_handle value (tsnStreamIdHandle, 9.1.1.1). All counters are unsigned integers. If used on links faster than 650 000 000 bits per second, they shall be 64 bits in length to ensure against excessively short wrap times."; reference "Clause 9.2 of IEEE Std. 802.1CB-2017"; container per-port-per-stream { uses sid-types:per-port-per-stream-stream-identification-counters-group; description "Contains the per-port-per-stream counters for stream identification"; reference "Clause 9.2 of IEEE Std. 802.1CB-2017"; } container per-port { uses sid-types:per-port-stream-identification-counters-group; description "Contains the per-port counters for stream identification"; reference "Clause 9.3 of IEEE Std. 802.1CB-2017"; } } } }