module ietf-flexe { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-flexe"; prefix "flexe"; import iana-if-type { prefix ianaift; } import ietf-interfaces { prefix if; reference "RFC8343: A YANG Data Model for Interface Management"; } organization "IETF CCAMP Working Group"; contact "WG Web: http://tools.ietf.org/wg/ccamp/ WG List: Author: Yuanlong Jiang Author: Xiang He Author: Weiqiang Cheng Author: Junfang Wang Author: Yalei Han "; description "This YANG module defines a data model for the configuration of FlexE interface."; revision "2019-10-30" { description "Initial version"; reference "draft-jiang-ccamp-flexe-yang-02: YANG Data Model for FlexE Interface Management "; } identity flexEthernet { base ianaift:iana-interface-type; description "Flex Ethernet."; } typedef slot-granularity-enumeration { type enumeration { enum slot-5g { value 1; description "5Gbps per slot."; } enum slot-25g { value 2; description "25Gbps per slot."; } enum slot-others { value 254; description "Other type of granularities per slot."; } } description "The bandwidth granularity of a slot. Options for this enumeration are specified by the OIF standard, currently only 5G and 25G are defined."; reference "OIF Flex 2.0: Section 6.7"; } typedef slot-status-enumeration { type enumeration { enum unavailable { value 1; description "slot is unavailable for a FlexE client."; } enum unused { value 2; description "slot is unused."; } enum used { value 3; description "slot is used."; } } description "The status of a slot in a PHY. Options for this enumeration are specified by the OIF standard, 'used' is implicit."; reference "OIF Flex 2.0: Section 7.3.4 and Section 7.6"; } typedef flexe-phy-enumeration { type enumeration { enum 'PHY-100GBASE-R' { value 1; description "100GBASE-R PHY, as defined in FlexE 1.0."; } enum 'PHY-200GBASE-R' { value 2; description "200GBASE-R PHY, as defined in FlexE 2.0."; } enum 'PHY-400GBASE-R' { value 3; description "400GBASE-R PHY, as defined in FlexE 2.0."; } enum 'PHY-50GBASE-R' { value 4; description "50GBASE-R PHY, as defined in FlexE 2.1."; } } description "The current type of PHYs bonded in a FlexE Group. Values for this enumeration are specified by the OIF standard."; reference "OIF Flex 2.0 and 2.1: Section 5.2.1.5"; } typedef phy-status-enumeration { type enumeration { enum phy-status-OK { value 0; description "The FlexE PHY status is ok"; } enum phy-status-LOF { value 1; description "The FlexE PHY status is Loss of Frame"; } enum phy-status-RPF { value 2; description "The FlexE PHY status is Remote PHY Fault"; } enum phy-status-LPF { value 3; description "The FlexE PHY status is Local PHY Fault"; } } description "The current PHY status. RPF, LPF, LOF and OK are defined."; reference "OIF Flex 2.0: Section 7.3.8"; } typedef client-status-enumeration { type enumeration { enum flexe-client-status-OK { value 0; description "The FlexE client status is OK"; } enum flexe-client-status-LF { value 1; description "The FlexE client status is Local Fault"; } enum flexe-client-status-RF { value 2; description "The FlexE client status is Remote Fault"; } } description "The client status. RPF, LPF and OK are defined."; reference "OIF Flex 2.0: Section 7.3.8"; } augment "/if:interfaces/if:interface" { when "if:type = 'ianaift:flexEthernet'" { description "Applies to Flex bonded Ethernet interfaces"; } description "Augment interface model with OIF Flex Ethernet interface specific configuration nodes. Each flexEthernet interface represents a FlexE Group configured in a device."; container flexe-group { description "The struct containing all FlexE related configuration (see OIF FlexE 2.0 Section 6.1). Note that max number of FlexE groups in a network is 63."; leaf group-number { type uint32 { range "1..1048574"; } description "FlexE Group Number as defined in Section 7.3.6 of FlexE 2.0."; } leaf slot-granularity { type slot-granularity-enumeration; default "slot-5g"; description "The granularity of a slot in a FlexE group."; } leaf flexe-phy-type { type flexe-phy-enumeration; default "PHY-100GBASE-R"; description "The type of PHYs bonded in a FlexE Group."; } leaf calendar-protocol-enable { type boolean; default true; description "Whether calendar negotiation protocol is enabled or not."; reference "OIF Flex 2.0: Section 7.3.4"; } list flexe-phy-list { key "flexe-phy-if"; description "List of PHYs bonded in a FlexE group."; leaf flexe-phy-if { type if:interface-ref; description "Reference to a Flexe PHY interface."; } leaf phy-number { type uint8 { range "1 .. 254"; } description "PHY number of a FlexE PHY. If PHY type is 100GBASE-R, phy-number is [1,254]. If PHY type is 200GBASE-R, phy-number is [1,126]. If PHY type is 400GBASE-R, phy-number is [1, 62]."; } leaf flexe-phy-status { type phy-status-enumeration; default "phy-status-OK"; config false; description "The FlexE PHY status."; } list calendar-slot-list { key "slot-id"; leaf slot-id { type uint8; description "slot id of a slot in a PHY."; } description "List of slots in a FlexE PHY. Max elements of slot-list for a FlexE PHY is dependent on the PHY bandwidth (X)G and the slot granularity (Y)G, i.e., X/Y. For example, for a 400GBASE-R PHY: If slot-granularity=slot-5g, max-elements is 80. If slot-granularity=slot-25g, max-elements is 16."; leaf flexe-slot-status { type slot-status-enumeration; default unused; config false; description "Slot status of a FlexE slot."; } } //calendar-slot-list } //flexe-phy-list list flexe-client-list { key "client-id"; description "List of FlexE clients in a FlexE Group."; leaf client-id { type uint16 { range "1..65534"; } description "FlexE Client field as defined in FlexE 2.0 Section 7.3.4."; } leaf flexe-client-if { type if:interface-ref; description "The type of a flexe client interface must be 'flexeClient'."; } list client-slot-list { key "client-slot-id"; min-elements 1; description "List of slots for a FlexE client."; leaf client-slot-id { type uint8; description "Client slot id of a client slot in sequence for a client."; } leaf mapped-phy-if { type if:interface-ref; description "Mapped PHY interface of a client slot."; } leaf mapped-slot-id { type uint8; description "Mapped Slot id of a client slot in the mapped PHY. If a slot [i] is mapped, flexe-slot-status[i] in the Mapped PHY MUST be set to 'used' "; } } // client-slot-list leaf flexe-client-status { type client-status-enumeration; default flexe-client-status-OK; config false; description "The FlexE client status."; } } //flexe-client-list leaf flexe-group-status { type uint8; config false; description "Status for a FlexE Group. If any PHY is in fault, or any FlexE configuration is mismatched, the FlexE Group status is indicated in fault. Status includes: OK, Local Fault, Remote Fault, mismatch and etc."; } } //flexe-group } //augment }