This is asdf.info, produced by makeinfo version 6.8 from asdf.texinfo.

This manual describes ASDF, a system definition facility for Common Lisp
programs and libraries.

   You can find the latest version of this manual at
<https://common-lisp.net/project/asdf/asdf.html>.

   ASDF Copyright © 2001-2019 Daniel Barlow and contributors.

   This manual Copyright © 2001-2019 Daniel Barlow and contributors.

   This manual revised © 2009-2019 Robert P. Goldman and Francois-Rene
Rideau.

   Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

   The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* asdf: (asdf).           Another System Definition Facility (for Common Lisp)
END-INFO-DIR-ENTRY


File: asdf.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)

ASDF: Another System Definition Facility
****************************************

Manual for Version 3.3.6

   This manual describes ASDF, a system definition facility for Common
Lisp programs and libraries.

   You can find the latest version of this manual at
<https://common-lisp.net/project/asdf/asdf.html>.

   ASDF Copyright © 2001-2019 Daniel Barlow and contributors.

   This manual Copyright © 2001-2019 Daniel Barlow and contributors.

   This manual revised © 2009-2019 Robert P. Goldman and Francois-Rene
Rideau.

   Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

   The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

* Menu:

* Introduction::
* Quick start summary::
* Loading ASDF::
* Configuring ASDF::
* Using ASDF::
* Defining systems with defsystem::
* The object model of ASDF::
* Controlling where ASDF searches for systems::
* Controlling where ASDF saves compiled files::
* Error handling::
* Miscellaneous additional functionality::
* Getting the latest version::
* FAQ::
* Ongoing Work::
* Bibliography::
* Concept Index::
* Function and Macro Index::
* Variable Index::
* Class and Type Index::

 — The Detailed Node Listing —

Loading ASDF

* Loading a pre-installed ASDF::
* Checking whether ASDF is loaded::
* Upgrading ASDF::
* Replacing your implementation's ASDF::
* Loading ASDF from source::

Configuring ASDF

* Configuring ASDF to find your systems::
* Configuring ASDF to find your systems --- old style::
* Configuring where ASDF stores object files::
* Resetting the ASDF configuration::

Using ASDF

* Loading a system::
* Convenience Functions::
* Moving on::

Defining systems with defsystem

* The defsystem form::
* A more involved example::
* The defsystem grammar::
* Other code in .asd files::
* The package-inferred-system extension::

The Object model of ASDF

* Operations::
* Components::
* Dependencies::
* Functions::
* Parsing system definitions::

Operations

* Predefined operations of ASDF::
* Creating new operations::

Components

* Common attributes of components::
* Pre-defined subclasses of component::
* Creating new component types::

Properties

* Pre-defined subclasses of component::
* Creating new component types::

Controlling where ASDF searches for systems

* Configurations::
* Truenames and other dangers::
* XDG base directory::
* Backward Compatibility::
* Configuration DSL::
* Configuration Directories::
* Shell-friendly syntax for configuration::
* Search Algorithm::
* Caching Results::
* Configuration API::
* Introspection::
* Status::
* Rejected ideas::
* TODO::
* Credits for the source-registry::

Configuration Directories

* The here directive::

Introspection

* *source-registry-parameter* variable::
* Information about system dependencies::

Controlling where ASDF saves compiled files

* Output Configurations::
* Output Backward Compatibility::
* Output Configuration DSL::
* Output Configuration Directories::
* Output Shell-friendly syntax for configuration::
* Semantics of Output Translations::
* Output Caching Results::
* Output location API::
* Credits for output translations::

Miscellaneous additional functionality

* Controlling file compilation::
* Controlling source file character encoding::
* Miscellaneous Functions::
* Some Utility Functions::

FAQ

* Where do I report a bug?::
* Mailing list::
* What has changed between ASDF 1 ASDF 2 and ASDF 3?::
* Issues with installing the proper version of ASDF::
* Issues with configuring ASDF::
* Issues with using and extending ASDF to define systems::
* ASDF development FAQs::

“What has changed between ASDF 1, ASDF 2, and ASDF 3?”

* What are ASDF 1 2 3?::
* How do I detect the ASDF version?::
* ASDF can portably name files in subdirectories::
* Output translations::
* Source Registry Configuration::
* Usual operations are made easier to the user::
* Many bugs have been fixed::
* ASDF itself is versioned::
* ASDF can be upgraded::
* Decoupled release cycle::
* Pitfalls of the transition to ASDF 2::
* Pitfalls of the upgrade to ASDF 3::
* What happened to the bundle operations::

Issues with installing the proper version of ASDF

* My Common Lisp implementation comes with an outdated version of ASDF. What to do?::
* I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?::
* After upgrading ASDF, ASDF (and Quicklisp) can’t find my systems: After upgrading ASDF.

Issues with configuring ASDF

* How can I customize where fasl files are stored?::
* How can I wholly disable the compiler output cache?::
* How can I debug problems finding ASDF systems::

Issues with using and extending ASDF to define systems

* How can I cater for unit-testing in my system?::
* How can I cater for documentation generation in my system?::
* How can I maintain non-Lisp (e.g. C) source files?::
* I want to put my module's files at the top level.  How do I do this?::
* How do I create a system definition where all the source files have a .cl extension?::
* How do I mark a source file to be loaded only and not compiled?::
* How do I work with readtables?::
* How can I capture ASDF's output?::
* LOAD-PATHNAME has a weird value::
* How can I produce a binary at a specific path from sources at a specific path::

ASDF development FAQs

* How do I run the tests interactively in a REPL?::



File: asdf.info,  Node: Introduction,  Next: Quick start summary,  Prev: Top,  Up: Top

1 Introduction
**************

ASDF, or Another System Definition Facility, is a _build system_: a tool
for specifying how systems of Common Lisp software are made up of
components (sub-systems and files), and how to operate on these
components in the right order so that they can be compiled, loaded,
tested, etc.  If you are new to ASDF, *note the quick start guide: Quick
start summary.

   ASDF presents three faces: one for users of Common Lisp software who
want to reuse other people’s code, one for writers of Common Lisp
software who want to specify how to build their systems, and one for
implementers of Common Lisp extensions who want to extend the build
system.  For more specifics, *note Using ASDF::, to learn how to use
ASDF to load a system.  *Note Defining systems with defsystem::, to
learn how to define a system of your own.  *Note The object model of
ASDF::, for a description of the ASDF internals and how to extend ASDF.

   Note that ASDF is _not_ a tool for library and system _installation_;
it plays a role like ‘make’ or ‘ant’, not like a package manager.  In
particular, ASDF should not to be confused with Quicklisp or
ASDF-Install, that attempt to find and download ASDF systems for you.
Despite what the name might suggest, ASDF-Install was never a part of
ASDF; it was always a separate piece of software.  ASDF-Install has also
been unmaintained and obsolete for a very long time.  We recommend you
use Quicklisp (<http://www.quicklisp.org/>) instead, a Common Lisp
package manager which works well and is being actively maintained.  If
you want to download software from version control instead of tarballs,
so you may more easily modify it, we recommend clbuild
(<http://common-lisp.net/project/clbuild/>).  As for where on your
filesystem to install Common Lisp software, we recommend subdirectories
of ‘~/common-lisp/’: starting with ASDF 3.1.2 (2014), this hierarchy is
included in the default source-registry configuration.

   Finally, note that this manual is incomplete.  All the bases are
covered, but many advanced topics are only barely alluded to, and there
is not much in terms of examples.  The source code remains the ultimate
source of information, free software systems in Quicklisp remain the
best source of examples, and the mailing-list the best place to ask for
help.


File: asdf.info,  Node: Quick start summary,  Next: Loading ASDF,  Prev: Introduction,  Up: Top

2 Quick start summary
*********************

   • To load an ASDF system:

        • Load ASDF itself into your Lisp image, using ‘(require
          "asdf")’.  Check that you have a recent version using
          ‘(asdf:asdf-version)’.  For more details, or if any of the
          above fails, *note Loading ASDF::.

        • Make sure software is installed where ASDF can find it.  The
          simplest way is to put all your Lisp code in subdirectories of
          ‘~/common-lisp/’ (starting with ASDF 3.1.2), or
          ‘~/.local/share/common-lisp/source/’ (for ASDF 2 and later, or
          if you want to keep source in a hidden directory).  For more
          details, *note Configuring ASDF to find your systems::.

        • Load your system with ‘(asdf:load-system "MY-SYSTEM")’.  *Note
          Using ASDF::.

   • To make your own ASDF system:

        • As above, load and configure ASDF.

        • Make a new directory for your system, ‘MY-SYSTEM/’, again in a
          location where ASDF can find it.  All else being equal, the
          easiest location is probably ‘~/common-lisp/my-system/’.
          *Note Configuring ASDF to find your systems::.

        • Create an ASDF system definition listing the dependencies of
          your system, its components, and their interdependencies, and
          put it in ‘MY-SYSTEM.asd’.  This file must have the same name
          as your system, all lowercase.  *Note Defining systems with
          defsystem::.

        • Use ‘(asdf:load-system "MY-SYSTEM")’ to make sure it’s all
          working properly.  *Note Using ASDF::.


File: asdf.info,  Node: Loading ASDF,  Next: Configuring ASDF,  Prev: Quick start summary,  Up: Top

3 Loading ASDF
**************

* Menu:

* Loading a pre-installed ASDF::
* Checking whether ASDF is loaded::
* Upgrading ASDF::
* Replacing your implementation's ASDF::
* Loading ASDF from source::


File: asdf.info,  Node: Loading a pre-installed ASDF,  Next: Checking whether ASDF is loaded,  Prev: Loading ASDF,  Up: Loading ASDF

3.1 Loading a pre-installed ASDF
================================

The recommended way to load ASDF is via:
     (require "asdf")

   All actively maintained Lisp implementations now include a copy of
ASDF 3 that you can load this way using Common Lisp’s ‘require’
function.(1)

   If the implementation you are using doesn’t provide a recent ASDF 3,
we recommend you upgrade it.  If for some reason you would rather not
upgrade it, we recommend you replace your implementation’s ASDF. *Note
Replacing your implementation's ASDF::.  If all else fails, see *note
Loading ASDF from source:: below.

   If you use an actively maintained implementation that fails to
provide an up-to-date enough stable release of ASDF, you may also send a
bug report to your Lisp vendor and complain about it — or you may fix
the issue yourself if it’s free software.

   As of the writing of this manual, the following implementations
provide ASDF 3 this way: ABCL, Allegro CL, CLASP, Clozure CL, CMUCL,
ECL, GNU CLISP, LispWorks, MKCL, SBCL. The following implementations
only provide ASDF 2: MOCL, XCL. The following implementations don’t
provide ASDF: Corman CL, GCL, Genera, MCL, SCL. The latter
implementations are not actively maintained (except maybe GCL); if some
of them are ever released again, they probably will include ASDF 3.

   For maximum convenience you might want to have ASDF loaded whenever
you start your Lisp implementation, for example by loading it from the
startup script or dumping a custom core — check your Lisp
implementation’s manual for details.  SLIME notably sports a
‘slime-asdf’ contrib that makes life easier with ASDF.

   ---------- Footnotes ----------

   (1) NB: all implementations except GNU CLISP also accept ‘(require
"ASDF")’, ‘(require 'asdf)’ and ‘(require :asdf)’.  For portability’s
sake, you should use ‘(require "asdf")’.


File: asdf.info,  Node: Checking whether ASDF is loaded,  Next: Upgrading ASDF,  Prev: Loading a pre-installed ASDF,  Up: Loading ASDF

3.2 Checking whether ASDF is loaded
===================================

To check that ASDF is properly loaded, you can run this form:

     (asdf:asdf-version)

   If it returns a string, that is the version of ASDF that is currently
installed.  If that version is suitably recent (say, 3.1.2 or later),
then you can skip directly to next chapter: *Note Configuring ASDF::.

   If it raises an error, then either ASDF is not loaded, or you are
using a very old version of ASDF, and need to install ASDF 3.

   For more precision in detecting versions old and new, *note How do I
detect the ASDF version?::.

   If you are experiencing problems with ASDF, please try upgrading to
the latest released version, using the method below, before you contact
us and raise an issue.


File: asdf.info,  Node: Upgrading ASDF,  Next: Replacing your implementation's ASDF,  Prev: Checking whether ASDF is loaded,  Up: Loading ASDF

3.3 Upgrading ASDF
==================

If your implementation already provides ASDF 3 or later (and it should),
but you want a more recent ASDF version than your implementation
provides, then you just need to ensure the more recent ASDF is installed
in a configured path, like any other system.  We recommend you download
an official tarball or checkout a release from git into
‘~/common-lisp/asdf/’.  (*note Configuring ASDF to find your systems::).

   Once the source code for ASDF is installed, you don’t need any extra
step to load it beyond the usual ‘(require "asdf")’: ASDF 3 will
automatically look whether an updated version of itself is available
amongst the regularly configured systems, before it compiles anything
else.

   If your implementation fails to provide ASDF 3 or later, *note
Replacing your implementation's ASDF::.


File: asdf.info,  Node: Replacing your implementation's ASDF,  Next: Loading ASDF from source,  Prev: Upgrading ASDF,  Up: Loading ASDF

3.4 Replacing your implementation’s ASDF
========================================

All maintained implementations now provide ASDF 3 in their latest
release.  If yours doesn’t, we recommend you upgrade it.

   Now, if you insist on using an old implementation that didn’t provide
ASDF or provided an old version, we recommend installing a recent ASDF,
as explained below, into your implementation’s installation directory.
Thus your modified implementation will now provide ASDF 3.  This
requires proper write permissions and may necessitate execution as a
system administrator.

   The ASDF source repository contains a tool to help you upgrade your
implementation’s ASDF. You can invoke it from the shell command-line as
‘tools/asdf-tools install-asdf lispworks’ (where you can replace
‘lispworks’ by the name of the relevant implementation), or you can
‘(load "tools/install-asdf.lisp")’ from your Lisp REPL.

   This script works on Allegro CL, Clozure CL, CMU CL, ECL, GCL, GNU
CLISP, LispWorks, MKCL, SBCL, SCL, XCL. It doesn’t work on ABCL, Corman
CL, Genera, MCL, MOCL. Happily, ABCL is usually pretty up to date and
shouldn’t need that script.  GCL requires a very recent version, and
hasn’t been tested much.  Corman CL, Genera, MCL are obsolete anyway.
MOCL is incomplete.


File: asdf.info,  Node: Loading ASDF from source,  Prev: Replacing your implementation's ASDF,  Up: Loading ASDF

3.5 Loading ASDF from source
============================

If you write build scripts that must remain portable to old machines
with old implementations that you cannot ensure have been upgraded or
modified to provide a recent ASDF, you may have to install the file
‘asdf.lisp’ somewhere and load it with:

     (load "/path/to/your/installed/asdf.lisp")

   The single file ‘asdf.lisp’ is all you normally need to use ASDF.

   You can extract this file from latest release tarball on the ASDF
website (https://common-lisp.net/project/asdf/).  If you are daring and
willing to report bugs, you can get the latest and greatest version of
ASDF from its git repository.  *Note Getting the latest version::.

   For scripts that try to use ASDF simply via ‘require’ at first, and
make heroic attempts to load it the hard way if at first they don’t
succeed, see ‘tools/load-asdf.lisp’ distributed with the ASDF source
repository, or the code of ‘cl-launch’ (https://cliki.net/cl-launch).


File: asdf.info,  Node: Configuring ASDF,  Next: Using ASDF,  Prev: Loading ASDF,  Up: Top

4 Configuring ASDF
******************

For standard use cases, ASDF should work pretty much out of the box.  We
recommend you skim the sections on configuring ASDF to find your systems
and choose the method of installing Lisp software that works best for
you.  Then skip directly to *Note Using ASDF::.  That will probably be
enough.  You are unlikely to have to worry about the way ASDF stores
object files, and resetting the ASDF configuration is usually only
needed in corner cases.

* Menu:

* Configuring ASDF to find your systems::
* Configuring ASDF to find your systems --- old style::
* Configuring where ASDF stores object files::
* Resetting the ASDF configuration::


File: asdf.info,  Node: Configuring ASDF to find your systems,  Next: Configuring ASDF to find your systems --- old style,  Prev: Configuring ASDF,  Up: Configuring ASDF

4.1 Configuring ASDF to find your systems
=========================================

In order to compile and load your systems, ASDF must be configured to
find the ‘.asd’ files that contain system definitions.

   There are a number of different techniques for setting yourself up
with ASDF, starting from easiest to the most complex:

   • Put all of your systems in one of the standard locations,
     subdirectories of
        • ‘~/common-lisp/’ or
        • ‘~/.local/share/common-lisp/source/’.
     If you install software there, you don’t need further
     configuration.(1)  You can then skip to the next section.  *Note
     Loading a system::.

   • If you’re using some tool to install software (e.g.  Quicklisp),
     the authors of that tool should already have configured ASDF.

   • If you have more specific desires about how to lay out your
     software on disk, the preferred way to configure where ASDF finds
     your systems is the ‘source-registry’ facility, fully described in
     its own chapter of this manual.  *Note Controlling where ASDF
     searches for systems::.  Here is a quick recipe for getting
     started.

     First create the directory
     ‘~/.config/common-lisp/source-registry.conf.d/’(2); there create a
     file with any name of your choice but with the type ‘conf’(3), for
     instance ‘50-luser-lisp.conf’; in this file, add the following line
     to tell ASDF to recursively scan all the subdirectories under
     ‘/home/luser/lisp/’ for ‘.asd’ files: ‘(:tree "/home/luser/lisp/")’

     That’s enough.  You may replace ‘/home/luser/lisp/’ by wherever you
     want to install your source code.  You don’t actually need to
     specify anything if you use the default ‘~/common-lisp/’ as above
     and your implementation provides ASDF 3.1.2 or later.  If your
     implementation provides an earlier variant of ASDF 3, you might
     want to specify ‘(:tree (:home "common-lisp/"))’ for bootstrap
     purposes, then install a recent source tree of ASDF under
     ‘~/common-lisp/asdf/’.

     If you prefer to use a “link farm”, which is faster to use but
     costlier to manage than a recursive traversal, say at
     ‘/home/luser/.asd-link-farm/’, then you may instead (or
     additionally) create a file ‘42-asd-link-farm.conf’, containing the
     line: ‘(:directory "/home/luser/.asd-link-farm/")’

     ASDF will automatically read your configuration the first time you
     try to find a system.  If necessary, you can reset the
     source-registry configuration with:

          (asdf:clear-source-registry)

   • In earlier versions of ASDF, the system source registry was
     configured using a global variable, ‘asdf:*central-registry*’.  For
     more details about this, see the following section, *note
     Configuring ASDF to find your systems --- old style::.  Unless you
     need to understand this, skip directly to *note Configuring where
     ASDF stores object files::.

   Note that your Operating System distribution or your system
administrator may already have configured system-managed libraries for
you.

   ---------- Footnotes ----------

   (1) ‘~/common-lisp/’ is only included in the default configuration
starting with ASDF 3.1.2 or later.  If your implementation provides an
earlier variant of ASDF, you may need to explicitly configure it to use
this path, as further explained.

   (2) For Windows users, and starting with ASDF 3.1.5, start from your
‘%LOCALAPPDATA%’, which is usually ‘~/AppData/Local/’ (but you can ask
in a ‘CMD.EXE’ terminal ‘echo %LOCALAPPDATA%’ to make sure) and
underneath create a subpath
‘config/common-lisp/source-registry.conf.d/’.

   (3) By requiring the ‘.conf’ extension, and ignoring other files,
ASDF allows you to have disabled files, editor backups, etc.  in the
same directory with your active configuration files.

   ASDF will also ignore files whose names start with a ‘.’ character.

   It is customary to start the filename with two digits, to control the
sorting of the ‘conf’ files in the source registry directory, and thus
the order in which the directories will be scanned.


File: asdf.info,  Node: Configuring ASDF to find your systems --- old style,  Next: Configuring where ASDF stores object files,  Prev: Configuring ASDF to find your systems,  Up: Configuring ASDF

4.2 Configuring ASDF to find your systems — old style
=====================================================

Novices may skip this section.  Please _do not_ use the central-registry
if you are a novice, and _do not_ instruct novices to use the
central-registry.

   The old way to configure ASDF to find your systems is by ‘push’ing
directory pathnames onto the variable ‘asdf:*central-registry*’.

   You _must_ configure this variable _after_ you load ASDF 3 or later,
yet _before_ the first time you try to use it.  This loading and
configuring of ASDF must happen as part of some initialization script:
typically, either a script you maintain that builds your project, or
your implementation’s initialization script (e.g.  ‘~/.sbclrc’ for
SBCL).

   Also, if you are using an ancient ASDF 2 or earlier to load ASDF 3 or
later, then after it loads the ancient ASDF, your script _must_
configure the central-registry a first time to tell ASDF 1 or 2 where to
find ASDF 3, then load ASDF 3 with e.g.  ‘(asdf:operate 'asdf:load-op
"asdf")’, then configure the central-registry again, because ASDF 3 will
not preserve the central-registry from ASDF 2 when upgrading.  You
should probably be using the source-registry instead, which will be
preserved (unless you manually called ‘asdf:initialize-source-registry’
with an argument, in which case you will have to do it again indeed).
However, if you are using an ancient ASDF 2 or earlier, we _strongly_
recommend that you should instead upgrade your implementation, or
overwrite the ancient ASDF installation with a more recent one: *Note
Replacing your implementation's ASDF::.

   The ‘asdf:*central-registry*’ is empty by default in ASDF 2 or ASDF
3, but is still supported for compatibility with ASDF 1.  When used, it
takes precedence over the above source-registry.(1)

   For example, let’s say you want ASDF to find the ‘.asd’ file
‘/home/me/src/foo/foo.asd’.  In your Lisp initialization file, you could
have the following:

     (require "asdf")
     (push "/home/me/src/foo/" asdf:*central-registry*)

   Note the trailing slash: when searching for a system, ASDF will
evaluate each entry of the central registry and coerce the result to a
pathname.(2)  The trailing directory name separator is necessary to tell
Lisp that you’re discussing a directory rather than a file.  If you
leave it out, ASDF is likely to look in ‘/home/me/src/’ instead of
‘/home/me/src/foo/’ as you intended, and fail to find your system
definition.  Modern versions of ASDF will issue an error and offer you
to remove such entries from the central-registry.

   Typically there are a lot of ‘.asd’ files, and a common idiom was to
put _symbolic links_ to all of one’s ‘.asd’ files in a common directory
and push _that_ directory (the “link farm”) onto
‘asdf:*central-registry*’, instead of pushing each individual system
directory.

   ASDF knows to follow _symlinks_ to the actual location of the
systems.(3)

   For example, if ‘#p"/home/me/cl/systems/"’ is an element of
‘*central-registry*’, you could set up the system FOO as follows:

     $ cd /home/me/cl/systems/
     $ ln -s ~/src/foo/foo.asd .

   This old style for configuring ASDF is not recommended for new users,
but it is supported for old users, and for users who want a simple way
to programmatically control what directories are added to the ASDF
search path.

   ---------- Footnotes ----------

   (1) It is possible to further customize the system definition file
search.  That’s considered advanced use, and covered later: search
forward for ‘*system-definition-search-functions*’.  *Note Defining
systems with defsystem::.

   (2) ASDF will indeed call ‘eval’ on each entry.  It will skip entries
that evaluate to ‘nil’.

   Strings and pathname objects are self-evaluating, in which case the
‘eval’ step does nothing; but you may push arbitrary s-expressions onto
the central registry.  These s-expressions may be evaluated to compute
context-dependent entries, e.g.  things that depend on the value of
shell variables or the identity of the user.

   The variable ‘asdf:*central-registry*’ is thus a list of “system
directory designators”.  A “system directory designator” is a form which
will be evaluated whenever a system is to be found, and must evaluate to
a directory to look in (or ‘nil’).  By “directory”, we mean “designator
for a pathname with a non-empty DIRECTORY component”.

   (3) On Windows, you can use Windows shortcuts instead of POSIX
symlinks.  if you try aliases under MacOS, we are curious to hear about
your experience.


File: asdf.info,  Node: Configuring where ASDF stores object files,  Next: Resetting the ASDF configuration,  Prev: Configuring ASDF to find your systems --- old style,  Up: Configuring ASDF

4.3 Configuring where ASDF stores object files
==============================================

ASDF lets you configure where object files will be stored.  Sensible
defaults are provided and you shouldn’t normally have to worry about it.

   This allows the same source code repository to be shared between
several versions of several Common Lisp implementations, between several
users using different compilation options, with users who lack write
privileges on shared source directories, etc.  This also keeps source
directories from being cluttered with object/fasl files.

   Starting with ASDF 2, the ‘asdf-output-translations’ facility was
added to ASDF itself.  This facility controls where object files will be
stored.  This facility is fully described in a chapter of this manual,
*note Controlling where ASDF saves compiled files::.

   Note that before ASDF 2, other ASDF add-ons offered the same
functionality, each in subtly different and incompatible ways:
ASDF-Binary-Locations, cl-launch, common-lisp-controller.
ASDF-Binary-Locations is now not needed anymore and should not be used.
cl-launch 3.000 and common-lisp-controller 7.2 have been updated to
delegate object file placement to ASDF.


File: asdf.info,  Node: Resetting the ASDF configuration,  Prev: Configuring where ASDF stores object files,  Up: Configuring ASDF

4.4 Resetting the ASDF configuration
====================================

When you dump and restore an image, or when you tweak your
configuration, you may want to reset the ASDF configuration.  For that
you may use the following function:

 -- Function: clear-configuration
     Undoes any ASDF configuration regarding source-registry or
     output-translations.

   This function is pushed onto the ‘uiop:*image-dump-hook*’ by default,
which means that if you save an image using ‘uiop:dump-image’, or via
‘asdf:image-op’ and ‘asdf:program-op’, it will be automatically called
to clear your configuration.  If for some reason you prefer to call your
implementation’s underlying functionality, be sure to call
‘clear-configuration’ manually, or push it into your implementation’s
equivalent of ‘uiop:*image-dump-hook*’, e.g.  ‘sb-ext:*save-hooks*’ on
SBCL, or ‘ext:*before-save-initializations*’ on CMUCL and SCL, etc.


File: asdf.info,  Node: Using ASDF,  Next: Defining systems with defsystem,  Prev: Configuring ASDF,  Up: Top

5 Using ASDF
************

* Menu:

* Loading a system::
* Convenience Functions::
* Moving on::


File: asdf.info,  Node: Loading a system,  Next: Convenience Functions,  Prev: Using ASDF,  Up: Using ASDF

5.1 Loading a system
====================

The system FOO is loaded (and compiled, if necessary) by evaluating the
following Lisp form:

     (asdf:load-system :FOO)

   On some implementations (*note Convenience Functions::), ASDF hooks
into the ‘cl:require’ facility and you can just use:

     (require :FOO)

   Note that the canonical name of a system is a string, in _lowercase_.
System names can also be specified as symbols (including keyword
symbols).  If a symbol is given as argument, its package is ignored, its
‘symbol-name’ is taken, and converted to lowercase.  The name must be a
suitable value for the ‘:name’ initarg to ‘make-pathname’ in whatever
filesystem the system is to be found.

   Using lowercase as canonical is unconventional, but was selected
after some consideration.  The type of file systems we support either
have lowercase as customary case (Unix, Mac, Windows) or silently
convert lowercase to uppercase (lpns).


File: asdf.info,  Node: Convenience Functions,  Next: Moving on,  Prev: Loading a system,  Up: Using ASDF

5.2 Convenience Functions
=========================

ASDF provides three commands for the most common system operations:
‘load-system’, ‘compile-system’, and ‘test-system’.

   ASDF also provides ‘require-system’, a variant of ‘load-system’ that
skips loading systems that are already loaded.  This is sometimes
useful, for example, in order to avoid re-loading libraries that come
pre-loaded into your lisp implementation.

   ASDF also provides ‘make’, a way of allowing system developers to
choose a default operation for their systems.  For example, a developer
who has created a system intended to format a specific document, might
make document-formatting the default operation invoked by ‘make’,
instead of loading.  If the system developer doesn’t specify in the
system definition, the default operation will be loading.

   Because ASDF is an extensible system for defining _operations_ on
_components_, it also provides a generic function ‘operate’, so you may
arbitrarily operate on your systems beyond the default operations.  (At
the interactive REPL, users often use its shorter alias ‘oos’, which
stands for ‘operate-on-system’, a name inherited from ‘mk-defsystem’.)
You’ll use ‘operate’ whenever you want to do something beyond compiling,
loading and testing.

 -- Function: load-system system &rest keys &key force force-not verbose
          version &allow-other-keys
     Apply ‘operate’ with the operation ‘load-op’, the SYSTEM, and any
     provided keyword arguments.  Calling ‘load-system’ is the regular,
     recommended way to load a system into the current image.

 -- Function: compile-system system &rest keys &key force force-not
          verbose version &allow-other-keys
     Apply ‘operate’ with the operation ‘compile-op’, the SYSTEM, and
     any provided keyword arguments.  This will make sure all the files
     in the system are compiled, but not necessarily load any of them in
     the current image; on most systems, it will _not_ load all compiled
     files in the current image.  This function exists for symmetry with
     ‘load-system’ but is not recommended unless you are writing build
     scripts and know what you’re doing.  But then, you might be
     interested in ‘program-op’ rather than ‘compile-op’.

 -- Function: test-system system &rest keys &key force force-not verbose
          version &allow-other-keys
     Apply ‘operate’ with the operation ‘test-op’, the SYSTEM, and any
     provided keyword arguments.  *Note test-op::.

 -- Function: make system &rest keys &key &allow-other-keys
     Do “The Right Thing” with your system.  Starting with ASDF 3.1,
     this function ‘make’ is also available.  The default behaviour is
     to load the system as if by ‘load-system’; but system authors can
     override this default in their system definition they may specify
     an alternate operation as the intended use of their system, with a
     ‘:build-operation’ option in the ‘defsystem’ form (*note
     Build-operation::), and an intended output pathname for that
     operation with ‘:build-pathname’.  This function is experimental
     and largely untested.  Use at your own risk.

 -- Function: require-system system &rest keys &key &allow-other-keys
     ‘require-system’ skips any update to systems that have already been
     loaded, in the spirit of ‘cl:require’.  It does it by calling
     ‘load-system’ with a keyword option excluding already loaded
     systems.(1).  On actively maintained free software implementations
     (namely recent versions of ABCL, Clozure CL, CMUCL, ECL, GNU CLISP,
     MKCL and SBCL), once ASDF itself is loaded, ‘cl:require’ too can
     load ASDF systems, by falling back on ‘require-system’ for module
     names not recognized by the implementation.  (Note however that
     ‘require-system’ does _not_ fall back on ‘cl:require’; that would
     introduce an “interesting” potential infinite loop to break
     somehow.)

     ‘cl:require’ and ‘require-system’ are appropriate to load code that
     is not being modified during the current programming session.
     ‘cl:require’ will notably load the implementation-provided
     extension modules; ‘require-system’ won’t, unless they are also
     defined as systems somehow, which SBCL and MKCL do.
     ‘require-system’ may also be used to load any number of ASDF
     systems that the user isn’t either developing or debugging, for
     which a previously installed version is deemed to be satisfactory;
     ‘cl:require’ on the above-mentioned implementations will delegate
     to ‘require-system’ and may load them as well.  But for code that
     you are actively developing, debugging, or otherwise modifying, you
     should use ‘load-system’, so ASDF will pick on your modifications
     and transitively re-build the modified files and everything that
     depends on them (that the requested SYSTEM itself depends on — ASDF
     itself never builds anything unless it’s an explicitly requested
     system or the dependencies thereof).

 -- Function: already-loaded-systems
     Returns a list of names of the systems that have been successfully
     loaded so far.

   ---------- Footnotes ----------

   (1) For the curious, the option is ‘:force-not
(already-loaded-systems)’.


File: asdf.info,  Node: Moving on,  Prev: Convenience Functions,  Up: Using ASDF

5.3 Moving on
=============

That’s all you need to know to use ASDF to load systems written by
others.  The rest of this manual deals with writing system definitions
for Common Lisp software you write yourself, including how to extend
ASDF to define new operation and component types.


File: asdf.info,  Node: Defining systems with defsystem,  Next: The object model of ASDF,  Prev: Using ASDF,  Up: Top

6 Defining systems with defsystem
*********************************

This chapter describes how to use ASDF to define systems and develop
software.

* Menu:

* The defsystem form::
* A more involved example::
* The defsystem grammar::
* Other code in .asd files::
* The package-inferred-system extension::


File: asdf.info,  Node: The defsystem form,  Next: A more involved example,  Prev: Defining systems with defsystem,  Up: Defining systems with defsystem

6.1 The defsystem form
======================

This section begins with an example of a system definition, then gives
the full grammar of ‘defsystem’.

   Let’s look at a simple system.  This is a complete file that should
be saved as ‘hello-lisp.asd’ (in order that ASDF can find it when
ordered to operate on the system named ‘"hello-lisp"’).

     ;; Usual Lisp comments are allowed here

     (defsystem "hello-lisp"
       :description "hello-lisp: a sample Lisp system."
       :version "0.0.1"
       :author "Joe User <joe@example.com>"
       :licence "Public Domain"
       :depends-on ("optima.ppcre" "command-line-arguments")
       :components ((:file "packages")
                    (:file "macros" :depends-on ("packages"))
                    (:file "hello" :depends-on ("macros"))))

   Some notes about this example:

   • The ‘defsystem’ form defines a system named ‘hello-lisp’ that
     contains three source files: ‘packages.lisp’, ‘macros.lisp’ and
     ‘hello.lisp’.

   • The ‘.lisp’ suffix is implicit for Lisp source files.  The source
     files are located in the same directory as the ‘.asd’ file with the
     system definition.

   • The file ‘macros’ depends on ‘packages’ (presumably because the
     package it’s in is defined in ‘packages’), and the file ‘hello’
     depends on ‘macros’ (and hence, transitively on ‘packages’).  This
     means that ASDF will compile and load ‘packages’ then ‘macros’
     before starting the compilation of file ‘hello’.

   • This example system has external dependencies on two other systems,
     ‘optima.ppcre’ (that provides a friendly interface to matching
     regular expressions), and ‘command-line-arguments’ (that provides a
     way to parse arguments passed from the shell command line).  To use
     this system, ASDF must be configured to find installed copies of
     these systems; it will load them before it tries to compile and
     load ‘hello-lisp’.

   • This system also defines a bunch of metadata.  While it is optional
     to define these fields (and other fields like ‘:bug-tracker’,
     ‘:mailto’, ‘:long-name’, ‘:long-description’, ‘:source-control’),
     it is strongly recommended to define the fields ‘:description’,
     ‘:version’, ‘:author’, and ‘:licence’, especially if you intend
     your software to be eventually included in Quicklisp.

   • Make sure you know how the ‘:version’ numbers will be parsed!  Only
     period-separated non-negative integers are accepted at present.
     *Note Version specifiers::.

   • This file contains a single form, the ‘defsystem’ declaration.  No
     ‘in-package’ form, no ‘asdf:’ package prefix, no nothing.  Just the
     one naked ‘defsystem’ form.  This is what we recommend.  More
     complex system definition files are possible with arbitrary Lisp
     code, but we recommend that you keep it simple if you can.  This
     will make your system definitions more robust and more
     future-proof.

   This is all you need to know to define simple systems.  The next
example is much more involved, to give you a glimpse of how you can do
more complex things.  However, since it’s ultimately arbitrary Lisp
code, there is no bottom to the rabbit hole.


File: asdf.info,  Node: A more involved example,  Next: The defsystem grammar,  Prev: The defsystem form,  Up: Defining systems with defsystem

6.2 A more involved example
===========================

Let’s illustrate some more involved uses of ‘defsystem’ via a slightly
convoluted example:

     (in-package :asdf-user)

     (defsystem "foo"
       :version (:read-file-form "variables" :at (3 2))
       :components
       ((:file "package")
        (:file "variables" :depends-on ("package"))
        (:module "mod"
          :depends-on ("package")
          :serial t
          :components ((:file "utils")
                       (:file "reader")
                       (:file "cooker")
                       (:static-file "data.raw"))
          :output-files (compile-op (o c) (list "data.cooked"))
          :perform (compile-op :after (o c)
             (cook-data
              :in (component-pathname (find-component c "data.raw"))
              :out (first (output-files o c)))))
        (:file "foo" :depends-on ("mod"))))

     (defmethod action-description
         ((o compile-op) (c (eql (find-component "foo" "mod"))))
       "cooking data")

   Here are some notes about this example:

   • The main thing this file does is define a system ‘foo’.  It also
     contains other Lisp forms, which we’ll examine below.

   • Besides Lisp source files, this system contains a ‘:module’
     component named ‘"mod"’, which is a collection of three Lisp source
     files ‘utils.lisp’, ‘reader.lisp’, ‘cooker.lisp’ and ‘data.raw’

   • Note that the ‘:static-file’ does not have an implicit file type,
     unlike the Lisp source files.

   • This files will be located in a subdirectory of the main code
     directory named ‘mod/’ (this location could have been overridden to
     be in the same directory, or in a different subdirectory; see the
     discussion of the ‘:pathname’ option in *note The defsystem
     grammar::).

   • The ‘:serial t’ says that each sub-component of ‘mod’ depends on
     the previous components, so that ‘cooker.lisp’ depends-on
     ‘reader.lisp’, which depends-on ‘utils.lisp’.  Also ‘data.raw’
     depends on all of them, but that doesn’t matter since it’s a static
     file; on the other hand, if it appeared first, then all the Lisp
     files would be recompiled when the data is modified, which is
     probably not what is desired in this case.

   • The method-form tokens provide a shorthand for defining methods on
     particular components.  This part

               :output-files (compile-op (o c) (list "data.cooked"))
               :perform (compile-op :after (o c)
                  (cook-data
                   :in (component-pathname (find-component c "data.raw"))
                   :out (first (output-files o c))))

     has the effect of

          (defmethod output-files ((o compile-op) (c (eql ...)))
            (list "data.cooked"))
          (defmethod perform :after ((o compile-op) (c (eql ...)))
            (cook-data
             :in (component-pathname (find-component c "data.raw"))
             :out (first (output-files o c))))

     where ‘...’ is the component in question.  In this case ‘...’ would
     expand to something like

          (find-component "foo" "mod")

     For more details on the syntax of such forms, *note The defsystem
     grammar::.  For more details on what these methods do, *note
     Operations:: in *note The object model of ASDF::.

   • There is an additional ‘defmethod’ with a similar effect, because
     ASDF (as of ASDF 3.1.5) fails to accept inline-methods as above for
     ‘action-description’, instead only supporting the deprecated
     ‘explain’ interface.

   • In this case, these methods describe how this module defines code
     that it then uses to cook some data.

   • Importantly, ASDF is told about the input and output files used by
     the data cooker, and to make sure everyone agrees, the cooking
     function explicitly uses ASDF to access pathnames to the input and
     output data.

   • The file starts with a form ‘(in-package :asdf-user)’, but it is
     actually redundant, not necessary and not recommended.  But yet
     more complex cases (also not recommended) may usefully use an
     ‘in-package’ form.

   • Indeed, ASDF does not load ‘.asd’ files simply with ‘cl:load’, and
     neither should you.  You should let ASDF find and load them when
     you operate on systems.  If you somehow _must_ load a ‘.asd’ file,
     use the same function ‘asdf:load-asd’ that ASDF uses.  Among other
     things, it already binds the ‘*package*’ to ‘asdf-user’.  Recent
     versions of SLIME (2013-02 and later) know to do that when you ‘C-c
     C-k’ when you use the ‘slime-asdf’ contrib.

   • You shouldn’t use an ‘in-package’ form if you’re keeping things
     simple.  You should only use ‘in-package’ (and before it, a
     ‘defpackage’) when you’re going to define new classes, functions,
     variables, macros, etc., in the ‘.asd’ file, and want to thereby
     avoid name clashes.  Manuals for old versions of ASDF recommended
     use of such an idiom in ‘.asd’ files, but as of ASDF 3, we
     recommend that you don’t do that anymore, and instead define any
     ASDF extensions in their own system, on which you can then declare
     a dependency using ‘:defsystem-depends-on’.  *Note The defsystem
     grammar::.

   • More generally, you can always rely on symbols from packages
     ‘asdf’, ‘common-lisp’ and ‘uiop’ being available in ‘.asd’ files —
     most importantly including ‘defsystem’.  It is therefore redundant
     and in bad taste to use a package-prefixed ‘asdf:defsystem’ symbol
     in a ‘.asd’ file.  Just use ‘(defsystem ...)’.  Only package-prefix
     it when somehow dynamically generating system definitions from a
     package that doesn’t already use the ASDF package.

   • ‘asdf-user’ is actually only available starting since ASDF 3, but
     then again, ASDF 1 and 2 did crazy things with packages that ASDF 3
     has stopped doing(1), and since all implementations provide ASDF 3,
     you shouldn’t care about compatibility with ASDF 2.  We do not
     support ASDF 2 anymore, and we recommend that neither should you.

   • Starting with ASDF 3.1, ‘asdf-user’ uses ‘uiop’, whereas in earlier
     variants of ASDF 3 it only used ‘uiop/package’.  We recommend you
     either prefix use of UIOP functions with the package prefix
     ‘uiop:’, or make sure your system ‘:depends-on ((:version "asdf"
     "3.1.2"))’ or has a ‘#-asdf3.1 (error "MY-SYSTEM requires ASDF
     3.1.2")’.

   • Finally, we elided most metadata, but showed how you can have ASDF
     automatically extract the system’s version from a source file.  In
     this case, the 3rd subform of the 4th form (note that Lisp uses
     0-based indexing, English uses 1-based indexing).  Presumably, the
     4th form looks like ‘(defparameter *foo-version* "5.6.7")’.

   ---------- Footnotes ----------

   (1) ASDF 1 and 2 (up until 2.26) used to dynamically create and
delete temporary packages ‘asdf_N_’, one for each ‘.asd’ file, in a
misguided attempt to thereby reduce name clashes; but it failed at that
goal and only made things more complex.  ASDF 3 just uses a shared
package ‘asdf-user’ instead, and relies on the usual Common Lisp
conventions to avoid clashes.  As far as package oddities go, you may
just notice that the ‘asdf-user’ package also uses ‘uiop/common-lisp’, a
variant of the ‘common-lisp’ package that papers over deficiencies in
more obscure Common Lisp implementations; but unless you care about
Corman Lisp, GCL, Genera or MCL, you shouldn’t be concerned.


File: asdf.info,  Node: The defsystem grammar,  Next: Other code in .asd files,  Prev: A more involved example,  Up: Defining systems with defsystem

6.3 The defsystem grammar
=========================

     system-definition := ( defsystem *note system-designator: (system-designator)rule-system-designator. *note system-option: (system-option)rule-system-option.* )

     system-designator := *note simple-component-name: (simple-component-name)rule-simple-component-name.
                        | *note complex-component-name: (complex-component-name)rule-complex-component-name.

     # NOTE: Underscores are not permitted.
     # *note Simple component names: Simple component names.
     simple-component-name := LOWER-CASE STRING | SYMBOL

     # *note Complex component names: Complex component names.
     complex-component-name := STRING | SYMBOL

     system-option := :defsystem-depends-on *note dependency-def: (dependency-def)rule-dependency-def.
                    | :weakly-depends-on *note system-list: (system-list)rule-system-list.
                    | :class CLASS-NAME # *note System class names::
                    | :build-pathname *note pathname-specifier: (pathname-specifier)rule-pathname-specifier.
                    | :build-operation *note operation-name: (operation-name)rule-operation-name.
                    | *note system-option/asdf3: (system-option/asdf3)rule-system-option/asdf3.
                    | *note module-option: (module-option)rule-module-option.
                    | *note option: (option)rule-option.

     # These are only available since ASDF 3 (actually its alpha release
     # 2.27)
     system-option/asdf3 := :homepage STRING
                          | :bug-tracker STRING
                          | :mailto STRING
                          | :long-name STRING
                          | :source-control *note source-control: (source-control)rule-source-control.
                          | :version *note version-specifier: (version-specifier)rule-version-specifier.
                          | :entry-point OBJECT # *note Entry point::

     source-control := ( KEYWORD STRING )

     module-option := :components *note component-list: (component-list)rule-component-list.
                    | :serial [ t | nil ]

     option := :description STRING
             | :long-description STRING
             | :author *note person-or-persons: (person-or-persons)rule-person-or-persons.
             | :maintainer *note person-or-persons: (person-or-persons)rule-person-or-persons.
             | :pathname *note pathname-specifier: (pathname-specifier)rule-pathname-specifier.
             | :default-component-class CLASS-NAME
             | :perform *note method-form: (method-form)rule-method-form.
             | :explain *note method-form: (method-form)rule-method-form.
             | :output-files *note method-form: (method-form)rule-method-form.
             | :operation-done-p *note method-form: (method-form)rule-method-form.
             | :if-feature *note feature-expression: (feature-expression)rule-feature-expression.
             | :depends-on ( *note dependency-def: (dependency-def)rule-dependency-def.* )
             | :in-order-to ( *note dependency: (dependency)rule-dependency.+ )

     person-or-persons := STRING | ( STRING+ )

     system-list := ( *note simple-component-name: (simple-component-name)rule-simple-component-name.* )

     component-list := ( *note component-def: (component-def)rule-component-def.* )

     component-def := ( *note component-type: (component-type)rule-component-type. *note simple-component-name: (simple-component-name)rule-simple-component-name. *note option: (option)rule-option.* )

     component-type := :module | :file | :static-file | *note other-component-type: (other-component-type)rule-other-component-type.

     other-component-type := symbol-by-name # *note Component types::

     # This is used in :depends-on, as opposed to "dependency", which is used
     # in :in-order-to
     dependency-def := *note simple-component-name: (simple-component-name)rule-simple-component-name.
                     | ( :feature *note feature-expression: (feature-expression)rule-feature-expression. *note dependency-def: (dependency-def)rule-dependency-def. ) # *note Feature dependencies::
                     | ( :version *note simple-component-name: (simple-component-name)rule-simple-component-name. *note version-specifier: (version-specifier)rule-version-specifier. )
                     | ( :require MODULE-NAME )

     # "dependency" is used in :in-order-to, as opposed to "dependency-def"
     dependency := ( *note dependent-op: (dependent-op)rule-dependent-op. *note requirement: (requirement)rule-requirement.+ )
     requirement := ( *note required-op: (required-op)rule-required-op. REQUIRED-COMPONENT+ )
     dependent-op := *note operation-name: (operation-name)rule-operation-name.
     required-op := *note operation-name: (operation-name)rule-operation-name.

     # NOTE: pathnames should be all lower case, and have no underscores,
     # although hyphens are permitted.
     pathname-specifier := PATHNAME | STRING | SYMBOL

     version-specifier := STRING
                        | ( :read-file-form *note pathname-specifier: (pathname-specifier)rule-pathname-specifier. *note form-specifier: (form-specifier)rule-form-specifier.? )
                        | ( :read-file-line *note pathname-specifier: (pathname-specifier)rule-pathname-specifier. *note line-specifier: (line-specifier)rule-line-specifier.? )
     line-specifier := :at INTEGER # base zero
     form-specifier := :at [ INTEGER | ( INTEGER+ ) ]

     method-form := ( *note operation-name: (operation-name)rule-operation-name. *note qual: (qual)rule-qual. LAMBDA-LIST &rest BODY )
     qual := *note method-qualifier: (method-qualifier)rule-method-qualifier.?
     method-qualifier := :before | :after | :around

     feature-expression := KEYWORD
                         | ( :and *note feature-expression: (feature-expression)rule-feature-expression.* )
                         | ( :or *note feature-expression: (feature-expression)rule-feature-expression.* )
                         | ( :not *note feature-expression: (feature-expression)rule-feature-expression. )

     operation-name := SYMBOL

6.3.1 System designators
------------------------

System designators are either simple component names, or complex
(“slashy”) component names.

6.3.2 Simple component names (‘simple-component-name’)
------------------------------------------------------

Simple component names may be written as either strings or symbols.

   When using strings, use lower case exclusively.

   Symbols will be interpreted as convenient shorthand for the string
that is their ‘symbol-name’, converted to lower case.  Put differently,
a symbol may be a simple component name _designator_, but the simple
component name itself is the string.

   *Never* use underscores in component names, whether written as
strings or symbols.

   *Never* use slashes (“/”) in simple component names.  A slash
indicates a _complex_ component name; see below.  Using a slash
improperly will cause ASDF to issue a warning.

   Violating these constraints by mixing case, or including underscores
in component names, may lead to systems or components being impossible
to find, because component names are interpreted as file names.  These
problems will _definitely_ occur for users who have configured ASDF
using logical pathnames.

6.3.3 Complex component names
-----------------------------

A complex component name is a master name followed by a slash, followed
by a subsidiary name.  This allows programmers to put multiple system
definitions in a single ‘.asd’ file, while still allowing ASDF to find
these systems.

   The master name of a complex system *must* be the same as the name of
the ‘.asd’ file.

   The file ‘foo.asd’ will contain the definition of the system ‘"foo"’.
However, it may _also_ contain definitions of subsidiary systems, such
as ‘"foo/test"’, ‘"foo/docs"’, and so forth.  ASDF will “know” that if
you ask it to load system ‘"foo/test"’ it should look for that system’s
definition in ‘foo.asd’.

6.3.4 Component types
---------------------

Component type names, even if expressed as keywords, will be looked up
by name in the current package and in the asdf package, if not found in
the current package.  So a component type ‘my-component-type’, in the
current package ‘my-system-asd’ can be specified as
‘:my-component-type’, or ‘my-component-type’.

   ‘system’ and its subclasses are _not_ allowed as component types for
such children components.

6.3.5 System class names
------------------------

A system class name will be looked up in the same way as a Component
type (see above), except that only ‘system’ and its subclasses are
allowed.  Typically, one will not need to specify a system class name,
unless using a non-standard system class defined in some ASDF extension,
typically loaded through ‘DEFSYSTEM-DEPENDS-ON’, see below.  For such
class names in the ASDF package, we recommend that the ‘:class’ option
be specified using a keyword symbol, such as

     :class :MY-NEW-SYSTEM-SUBCLASS

   This practice will ensure that package name conflicts are avoided.
Otherwise, the symbol ‘MY-NEW-SYSTEM-SUBCLASS’ will be read into the
current package _before_ it has been exported from the ASDF extension
loaded by ‘:defsystem-depends-on’, causing a name conflict in the
current package.

6.3.6 Defsystem depends on
--------------------------

The ‘:defsystem-depends-on’ option to ‘defsystem’ allows the programmer
to specify another ASDF-defined system or set of systems that must be
loaded _before_ the system definition is processed.  Typically this is
used to load an ASDF extension that is used in the system definition.

6.3.7 Build-operation
---------------------

The ‘:build-operation’ option to ‘defsystem’ allows the programmer to
specify an operation that will be applied, in place of ‘load-op’ when
‘make’ (*note make: Convenience Functions.) is run on the system.  The
option value should be the name of an operation.  E.g.,
‘:build-operation doc-op’

   This feature is experimental and largely untested.  Use at your own
risk.

6.3.8 Weakly depends on
-----------------------

We do _NOT_ recommend you use this feature.  If you are tempted to write
a system FOO that weakly-depends-on a system BAR, we recommend that you
should instead write system FOO in a parametric way, and offer some
special variable and/or some hook to specialize its behaviour; then you
should write a system FOO+BAR that does the hooking of things together.

   The (deprecated) ‘:weakly-depends-on’ option to ‘defsystem’ allows
the programmer to specify another ASDF-defined system or set of systems
that ASDF should _try_ to load, but need not load in order to be
successful.  Typically this is used if there are a number of systems
that, if present, could provide additional functionality, but which are
not necessary for basic function.

   Currently, although it is specified to be an option only to
‘defsystem’, this option is accepted at any component, but it probably
only makes sense at the ‘defsystem’ level.  Programmers are cautioned
not to use this component option except at the ‘defsystem’ level, as
this anomalous behaviour may be removed without warning.

6.3.9 Pathname specifiers
-------------------------

A pathname specifier (‘pathname-specifier’) may be a pathname, a string
or a symbol.  When no pathname specifier is given for a component, which
is the usual case, the component name itself is used.

   If a string is given, which is the usual case, the string will be
interpreted as a Unix-style pathname where ‘/’ characters will be
interpreted as directory separators.  Usually, Unix-style relative
pathnames are used (i.e.  not starting with ‘/’, as opposed to absolute
pathnames); they are relative to the path of the parent component.
Finally, depending on the ‘component-type’, the pathname may be
interpreted as either a file or a directory, and if it’s a file, a file
type may be added corresponding to the ‘component-type’, or else it will
be extracted from the string itself (if applicable).

   For instance, the ‘component-type’ ‘:module’ wants a directory
pathname, and so a string ‘"foo/bar"’ will be interpreted as the
pathname ‘#p"foo/bar/"’.  On the other hand, the ‘component-type’
‘:file’ wants a file of type ‘lisp’, and so a string ‘"foo/bar"’ will be
interpreted as the pathname ‘#p"foo/bar.lisp"’, and a string
‘"foo/bar.quux"’ will be interpreted as the pathname
‘#p"foo/bar.quux.lisp"’.  Finally, the ‘component-type’ ‘:static-file’
wants a file without specifying a type, and so a string ‘"foo/bar"’ will
be interpreted as the pathname ‘#p"foo/bar"’, and a string
‘"foo/bar.quux"’ will be interpreted as the pathname ‘#p"foo/bar.quux"’.

   ASDF interprets the string ‘".."’ as the pathname directory component
word ‘:back’, which when merged, goes back one level in the directory
hierarchy.

   If a symbol is given, it will be translated into a string, and
downcased in the process.  The downcasing of symbols is unconventional,
but was selected after some consideration.  The file systems we support
either have lowercase as customary case (Unix, Mac, Windows) or silently
convert lowercase to uppercase (lpns), so this makes more sense than
attempting to use ‘:case :common’ as argument to ‘make-pathname’, which
is reported not to work on some implementations.

   Please avoid using underscores in system names, or component (module
or file) names, since underscores are not compatible with logical
pathnames (*note Using logical pathnames::).

   Pathname objects may be given to override the path for a component.
Such objects are typically specified using reader macros such as ‘#p’ or
‘#.(make-pathname ...)’.  Note however, that ‘#p...’ is a shorthand for
‘#.(parse-namestring ...)’ and that the behaviour of ‘parse-namestring’
is completely non-portable, unless you are using Common Lisp
‘logical-pathname’s, which themselves involve other non-portable
behaviour (*note Using logical pathnames::).  Pathnames made with
‘#.(make-pathname ...)’ can usually be done more easily with the string
syntax above.  The only case that you really need a pathname object is
to override the component-type default file type for a given component.
Therefore, pathname objects should only rarely be used.  Unhappily, ASDF
1 used not to properly support parsing component names as strings
specifying paths with directories, and the cumbersome ‘#.(make-pathname
...)’ syntax had to be used.  An alternative to ‘#.’ read-time
evaluation is to use ‘(eval `(defsystem ... ,pathname ...))’.

   Note that when specifying pathname objects, ASDF does not do any
special interpretation of the pathname influenced by the component type,
unlike the procedure for pathname-specifying strings.  On the one hand,
you have to be careful to provide a pathname that correctly fulfills
whatever constraints are required from that component type (e.g.  naming
a directory or a file with appropriate type); on the other hand, you can
circumvent the file type that would otherwise be forced upon you if you
were specifying a string.

6.3.10 Version specifiers
-------------------------

Version specifiers are strings to be parsed as period-separated lists of
integers.  I.e., in the example, ‘"0.2.1"’ is to be interpreted, roughly
speaking, as ‘(0 2 1)’.  In particular, version ‘"0.2.1"’ is interpreted
the same as ‘"0.0002.1"’, though the latter is not canonical and may
lead to a warning being issued.  Also, ‘"1.3"’ and ‘"1.4"’ are both
strictly ‘uiop:version<’ to ‘"1.30"’, quite unlike what would have
happened had the version strings been interpreted as decimal fractions.

   Instead of a string representing the version, the ‘:version’ argument
can be an expression that is resolved to such a string using the
following trivial domain-specific language: in addition to being a
literal string, it can be an expression of the form ‘(:read-file-form
<pathname-or-string> [:at <access-at-specifier>])’, or ‘(:read-file-line
<pathname-or-string> [:at <access-at-specifier>])’.  As the name
suggests, the former will be resolved by reading a form in the specified
pathname (read as a subpathname of the current system if relative or a
unix-namestring), and the latter by reading a line.  You may use a
‘uiop:access-at’ specifier with the ‘:at’ keyword, by default the
specifier is ‘0’, meaning the first form/line is returned.  For
‘:read-file-form’, subforms can also be specified, with e.g.  ‘(1 2 2)’
specifying “the third subform (index 2) of the third subform (index 2)
of the second form (index 1)” in the file (mind the off-by-one error in
the English language).

   System definers are encouraged to use version identifiers of the form
X.Y.Z for major version, minor version and patch level, where
significant API incompatibilities are signaled by an increased major
number.

   *Note Common attributes of components::.

6.3.11 Require
--------------

Use the implementation’s own ‘require’ to load the MODULE-NAME.

   It is good taste to use ‘(:feature _:implementation-name_ (:require
MODULE-NAME))’ rather than ‘#+_implementation-name_ (:require
MODULE-NAME)’ to only depend on the specified module on the specific
implementation that provides it.  *Note Feature dependencies::.

6.3.12 Feature dependencies
---------------------------

A feature dependency is of the form ‘(:feature FEATURE-EXPRESSION
DEPENDENCY)’ If the FEATURE-EXPRESSION is satisfied by the running lisp
at the time the system definition is parsed, then the DEPENDENCY will be
added to the system’s dependencies.  If the FEATURE-EXPRESSION is _not_
satisfied, then the feature dependency form is ignored.

   Note that this means that ‘:feature’ *cannot* be used to enforce a
feature dependency for the system in question.  I.e., it cannot be used
to require that a feature hold in order for the system definition to be
loaded.  E.g., one cannot use ‘(:feature :sbcl)’ to require that a
system only be used on SBCL.

   Feature dependencies are not to be confused with the obsolete feature
requirement (*note feature requirement::), or with ‘if-feature’.

6.3.13 Using logical pathnames
------------------------------

We do not generally recommend the use of logical pathnames, especially
not so to newcomers to Common Lisp.  However, we do support the use of
logical pathnames by old timers, when such is their preference.

   To use logical pathnames, you will have to provide a pathname object
as a ‘:pathname’ specifier to components that use it, using such syntax
as ‘#p"LOGICAL-HOST:absolute;path;to;component.lisp"’.

   You only have to specify such logical pathname for your system or
some top-level component.  Sub-components’ relative pathnames, specified
using the string syntax for names, will be properly merged with the
pathnames of their parents.  The specification of a logical pathname
host however is _not_ otherwise directly supported in the ASDF syntax
for pathname specifiers as strings.

   The ‘asdf-output-translation’ layer will avoid trying to resolve and
translate logical pathnames.  The advantage of this is that you can
define yourself what translations you want to use with the logical
pathname facility.  The disadvantage is that if you do not define such
translations, any system that uses logical pathnames will behave
differently under asdf-output-translations than other systems you use.

   If you wish to use logical pathnames you will have to configure the
translations yourself before they may be used.  ASDF currently provides
no specific support for defining logical pathname translations.

   Note that the reasons we do not recommend logical pathnames are that
(1) there is no portable way to set up logical pathnames _before_ they
are used, (2) logical pathnames are limited to only portably use a
single character case, digits and hyphens.  While you can solve the
first issue on your own, describing how to do it on each of fifteen
implementations supported by ASDF is more than we can document.  As for
the second issue, mind that the limitation is notably enforced on SBCL,
and that you therefore can’t portably violate the limitations but must
instead define some encoding of your own and add individual mappings to
name physical pathnames that do not fit the restrictions.  This can
notably be a problem when your Lisp files are part of a larger project
in which it is common to name files or directories in a way that
includes the version numbers of supported protocols, or in which files
are shared with software written in different programming languages
where conventions include the use of underscores, dots or CamelCase in
pathnames.

6.3.14 Serial dependencies
--------------------------

If the ‘:serial t’ option is specified for a module, ASDF will add
dependencies for each child component, on all the children textually
preceding it.  This is done as if by ‘:depends-on’.

     :serial t
     :components ((:file "a") (:file "b") (:file "c"))

   is equivalent to

     :components ((:file "a")
                  (:file "b" :depends-on ("a"))
                  (:file "c" :depends-on ("a" "b")))

6.3.15 Source location (‘:pathname’)
------------------------------------

The ‘:pathname’ option is optional in all cases for systems defined via
‘defsystem’, and generally is unnecessary.  In the simple case, source
files will be found in the same directory as the system or, in the case
of modules, in a subdirectory with the same name as the module.

   More specifically, ASDF follows a hairy set of rules that are
designed so that
  1. ‘find-system’ will load a system from disk and have its pathname
     default to the right place.

  2. This pathname information will not be overwritten with
     ‘*default-pathname-defaults*’ (which could be somewhere else
     altogether) if the user loads up the ‘.asd’ file into his editor
     and interactively re-evaluates that form.

   If a system is being loaded for the first time, its top-level
pathname will be set to:

   • The host/device/directory parts of ‘*load-truename*’, if it is
     bound.
   • ‘*default-pathname-defaults*’, otherwise.

   If a system is being redefined, the top-level pathname will be

   • changed, if explicitly supplied or obtained from ‘*load-truename*’
     (so that an updated source location is reflected in the system
     definition)

   • changed if it had previously been set from
     ‘*default-pathname-defaults*’

   • left as before, if it had previously been set from
     ‘*load-truename*’ and ‘*load-truename*’ is currently unbound (so
     that a developer can evaluate a ‘defsystem’ form from within an
     editor without clobbering its source location)

6.3.16 if-feature option
------------------------

This option allows you to specify a feature expression to be evaluated
as if by ‘#+’ to conditionally include a component in your build.  If
the expression is false, the component is dropped as well as any
dependency pointing to it.  As compared to using ‘#+’ which is expanded
at read-time, this allows you to have an object in your component
hierarchy that can be used for manipulations beside building your
project, and that is accessible to outside code that wishes to reason
about system structure.

   Programmers should be careful to consider *when* the ‘:if-feature’ is
evaluated.  Recall that ASDF first computes a build plan, and then
executes that plan.  ASDF will check to see whether or not a feature is
present *at planning time*, not during the build.  It follows that one
cannot use ‘:if-feature’ to check features that are set during the
course of the build.  It can only be used to check the state of features
before any build operations have been performed.

   This option was added in ASDF 3.  For more information, *Note
Required features: required-features.

6.3.17 Entry point
------------------

The ‘:entry-point’ option allows a developer to specify the entry point
of an executable program created by ‘program-op’.

   When ‘program-op’ is invoked, the form passed to this option is
converted to a function by ‘uiop:ensure-function’ and bound to
‘uiop:*image-entry-point*’.  Typically one will specify a string, e.g.
‘"foo:main"’, so that the executable starts with the ‘foo:main’
function.  Note that using the symbol ‘foo:main’ instead might not work
because the ‘foo’ package doesn’t necessarily exist when ASDF reads the
‘defsystem’ form.  For more information on ‘program-op’, *note
Predefined operations of ASDF::.

6.3.18 feature requirement
--------------------------

This requirement was removed in ASDF 3.1.  Please do not use it.  In
most cases, ‘:if-feature’ (*note if-feature option::) will provide an
adequate substitute.

   The ‘feature’ requirement used to ensure that a chain of component
dependencies would fail when a key feature was absent.  Used in
conjunction with ‘:if-component-dep-fails’ this provided a roundabout
way to express conditional compilation.


File: asdf.info,  Node: Other code in .asd files,  Next: The package-inferred-system extension,  Prev: The defsystem grammar,  Up: Defining systems with defsystem

6.4 Other code in .asd files
============================

Files containing ‘defsystem’ forms are regular Lisp files that are
executed by ‘load’.  Consequently, you can put whatever Lisp code you
like into these files.  However, it is recommended to keep such forms to
a minimal, and to instead define ‘defsystem’ extensions that you use
with ‘:defsystem-depends-on’.

   If however, you might insist on including code in the ‘.asd’ file
itself, e.g., to examine and adjust the compile-time environment,
possibly adding appropriate features to ‘*features*’.  If so, here are
some conventions we recommend you follow, so that users can control
certain details of execution of the Lisp in ‘.asd’ files:

   • Any informative output (other than warnings and errors, which are
     the condition system’s to dispose of) should be sent to the
     standard CL stream ‘*standard-output*’, so that users can easily
     control the disposition of output from ASDF operations.


File: asdf.info,  Node: The package-inferred-system extension,  Prev: Other code in .asd files,  Up: Defining systems with defsystem

6.5 The package-inferred-system extension
=========================================

Starting with release 3.1.2, ASDF supports a one-package-per-file style
of programming, in which each file is its own system, and dependencies
are deduced from the ‘defpackage’ form or its variant,
‘uiop:define-package’.

   In this style of system definition, package names map to systems with
the same name (in lower case letters), and if a system is defined with
‘:class package-inferred-system’, then system names that start with that
name (using the slash ‘/’ separator) refer to files under the filesystem
hierarchy where the system is defined.  For instance, if system ‘my-lib’
is defined in ‘/foo/bar/my-lib/my-lib.asd’, then system
‘my-lib/src/utility’ will be found in file
‘/foo/bar/my-lib/src/utility.lisp’.

   One package per file style was made popular by ‘faslpath’ and
‘quick-build’, and at the cost of stricter package discipline, may yield
more maintainable code.  This style is used in ASDF itself (starting
with ASDF 3), by ‘lisp-interface-library’, and a few other libraries.

   To use this style, choose a toplevel system name, e.g.  ‘my-lib’, and
create a file ‘my-lib.asd’.  Define ‘my-lib’ using the ‘:class
:package-inferred-system’ option in its ‘defsystem’.  For instance:
     ;; This example is based on lil.asd of LISP-INTERFACE-LIBRARY.

     #-asdf3.1 (error "MY-LIB requires ASDF 3.1 or later.")
     (defsystem "my-lib"
       :class :package-inferred-system
       :depends-on ("my-lib/interface/all"
                             "my-lib/src/all"
                             "my-lib/extras/all")
       :in-order-to ((test-op (load-op "my-lib/test/all")))
       :perform (test-op (o c) (symbol-call :my-lib/test/all :test-suite)))

     (defsystem "my-lib/test" :depends-on ("my-lib/test/all"))

     (register-system-packages "my-lib/interface/all" '(:my-lib-interface))
     (register-system-packages "my-lib/src/all" '(:my-lib-implementation))
     (register-system-packages "my-lib/test/all" '(:my-lib-test))

     (register-system-packages
      "closer-mop"
      '(:c2mop
        :closer-common-lisp
        :c2cl
        :closer-common-lisp-user
        :c2cl-user))

In the code above, the first form checks that we are using ASDF 3.1 or
later, which provides ‘package-inferred-system’.  This is probably no
longer necessary, since none of the major lisp implementations provides
an older version of ASDF.

   The function ‘register-system-packages’ must be called to register
packages used or provided by your system when the name of the
system/file that provides the package is not the same as the package
name (converted to lower case).

   Each file under the ‘my-lib’ hierarchy will start with a package
definition.  The form ‘uiop:define-package’ is supported as well as
‘defpackage’.  ASDF will compute dependencies from the ‘:use’, ‘:mix’,
and other importation clauses of this package definition.  Take the file
‘interface/order.lisp’ as an example:

     (uiop:define-package :my-lib/interface/order
       (:use :closer-common-lisp
        :my-lib/interface/definition
        :my-lib/interface/base)
       (:mix :fare-utils :uiop :alexandria)
       (:export ...))

   ASDF can tell that this file/system depends on system ‘closer-mop’
(registered above), ‘my-lib/interface/definition’, and
‘my-lib/interface/base’.

   How can ASDF find the file ‘interface/order.lisp’ from the toplevel
system ‘my-lib’, however?  In the example above, ‘interface/all.lisp’
(and other ‘all.lisp’) reexport all the symbols exported from the
packages at the same or lower levels of the hierarchy.  This can be
easily done with ‘uiop:define-package’, which has many options that
prove useful in this context.  For example:

     (uiop:define-package :my-lib/interface/all
       (:nicknames :my-lib-interface)
       (:use :closer-common-lisp)
       (:mix :fare-utils :uiop :alexandria)
       (:use-reexport
        :my-lib/interface/definition
        :my-lib/interface/base
        :my-lib/interface/order
        :my-lib/interface/monad/continuation))

   Thus the top level system need only depend on the ‘my-lib/.../all’
systems because ASDF detects ‘interface/order.lisp’ and all other
dependencies from ‘all’ systems’ ‘:use-reexport’ clauses, which
effectively allow for “inheritance” of symbols being exported.

   ASDF also detects dependencies from ‘:import-from’ clauses.  You may
thus import a well-defined set of symbols from an existing package, and
ASDF will know to load the system that provides that package.  In the
following example, ASDF will infer that the current system depends on
‘foo/baz’ from the first ‘:import-from’.  If you prefer to use any such
symbol fully qualified by a package prefix, you may declare a dependency
on such a package and its corresponding system via an ‘:import-from’
clause with an empty list of symbols.  For example, if we preferred to
use the name ‘foo/quux:bletch‘, the second, empty, ‘:import-from’ form
would cause ASDF to load ‘foo/quux’.

     (defpackage :foo/bar
       (:use :cl)
       (:import-from :foo/baz #:sym1 #:sym2)
       (:import-from :foo/quux)
       (:export ...))

   Note that starting with ASDF 3.1.5.6 only, ASDF will look for source
files under the ‘component-pathname’ (specified via the ‘:pathname’
option), whereas earlier versions ignore this option and use the
‘system-source-directory’ where the ‘.asd’ file resides.


File: asdf.info,  Node: The object model of ASDF,  Next: Controlling where ASDF searches for systems,  Prev: Defining systems with defsystem,  Up: Top

7 The Object model of ASDF
**************************

ASDF is designed in an object-oriented way from the ground up.  Both a
system’s structure and the operations that can be performed on systems
follow an extensible protocol, allowing programmers to add new
behaviours to ASDF. For example, ‘cffi’ adds support for special FFI
description files that interface with C libraries and for wrapper files
that embed C code in Lisp.  ‘asdf-jar’ supports creating Java JAR
archives in ABCL. ‘poiu’ supports compiling code in parallel using
background processes.

   The key classes in ASDF are ‘component’ and ‘operation’.  A
‘component’ represents an individual source file or a group of source
files, and the products (e.g., fasl files) produced from it.  An
‘operation’ represents a transformation that can be performed on a
component, turning them from source files to intermediate results to
final outputs.  Components are related by _dependencies_, specified in
system definitions.

   When ordered to ‘operate’ with some operation on a component (usually
a system), ASDF will first compute a _plan_ by traversing the dependency
graph using function ‘make-plan’.(1)  The resulting plan object contains
an ordered list of _actions_.  An action is a pair of an ‘operation’ and
a ‘component’, representing a particular build step to be ‘perform’ed.
The ordering of the plan ensures that no action is performed before all
its dependencies have been fulfilled.(2)

   In this chapter, we describe ASDF’s object-oriented protocol, the
classes that make it up, and the generic functions on those classes.
These generic functions often take both an operation and a component as
arguments: much of the power and configurability of ASDF is provided by
this use of CLOS’s multiple dispatch.  We will describe the built-in
component and operation classes, and explain how to extend the ASDF
protocol by defining new classes and methods for ASDF’s generic
functions.  We will also describe the many _hooks_ that can be
configured to customize the behaviour of existing _functions_.

* Menu:

* Operations::
* Components::
* Dependencies::
* Functions::
* Parsing system definitions::

   ---------- Footnotes ----------

   (1) Historically, the function that built a plan was called
‘traverse’, and returned a list of actions; it was deprecated in favor
of ‘make-plan’ (that returns a plan object) when the ‘plan’ objects were
introduced with ASDF 3; the old function is kept for backward
compatibility and debugging purposes only, and may be removed in the
near future.

   (2) The term _action_ was used by Kent Pitman in his article, “The
Description of Large Systems,” (*note Bibliography::), and we suspect
might be traced to ‘make’.  Although the term was only used by ASDF
hackers starting with ASDF 2, the concept was there since the very
beginning of ASDF 1, just not clearly articulated.


File: asdf.info,  Node: Operations,  Next: Components,  Prev: The object model of ASDF,  Up: The object model of ASDF

7.1 Operations
==============

An “operation” object of the appropriate type is instantiated whenever
the user wants to do something with a system like

   • compile all its files
   • load the files into a running lisp environment
   • copy its source files somewhere else

   Operations can be invoked directly, or examined to see what their
effects would be without performing them.  There are a bunch of methods
specialised on operation and component type that actually do the grunt
work.  Operations are invoked on systems via ‘operate’ (*note
operate::).

   ASDF contains a number of pre-defined operation classes for common,
and even fairly uncommon tasks that you might want to do with it.  In
addition, ASDF contains “abstract” operation classes that programmers
can use as building blocks to define ASDF extensions.  We discuss these
in turn below.

* Menu:

* Predefined operations of ASDF::
* Creating new operations::

   Operations are invoked on systems via ‘operate’.
 -- Generic function: operate OPERATION COMPONENT &rest INITARGS &key
          force force-not verbose &allow-other-keys
 -- Generic function: oos OPERATION COMPONENT &rest INITARGS &key
          &allow-other-keys
     ‘operate’ invokes OPERATION on SYSTEM.  ‘oos’ is a synonym for
     ‘operate’ (it stands for operate-on-system).

     OPERATION is an operation designator: it can be an operation object
     itself, or, typically, a symbol that is passed to ‘make-operation’
     (which will call ‘make-instance’), to create the operation object.
     COMPONENT is a component designator: it can be a component object
     itself, or, typically, a string or symbol (to be
     ‘string-downcase’d) that names a system, more rarely a list of
     strings or symbols that designate a subcomponent of a system.

     The ability to pass INITARGS to ‘make-operation’ is now deprecated,
     and will be removed.  For more details, *note make-operation::.
     Note that dependencies may cause the operation to invoke other
     operations on the system or its components: the new operations may
     or may not be created with the same INITARGS as the original one
     (for the moment).

     If FORCE is ‘:all’, then all systems are forced to be recompiled
     even if not modified since last compilation.  If FORCE is ‘t’, then
     only the system being loaded is forced to be recompiled even if not
     modified since last compilation, but other systems are not
     affected.  If FORCE is a list, then it specifies a list of systems
     that are forced to be recompiled even if not modified since last
     compilation.  If FORCE-NOT is ‘:all’, then all systems are forced
     not to be recompiled even if modified since last compilation.  If
     FORCE-NOT is ‘t’, then all systems but the system being loaded are
     forced not to be recompiled even if modified since last compilation
     (note: this was changed in ASDF 3.1.2).  If FORCE-NOT is a list,
     then it specifies a list of systems that are forced not to be
     recompiled even if modified since last compilation.

     Both FORCE and FORCE-NOT apply to systems that are dependencies and
     were already compiled.  FORCE-NOT takes precedences over FORCE, as
     it should, really, but unhappily only since ASDF 3.1.2.  Moreover,
     systems which have been registered as immutable by
     ‘register-immutable-system’ (since ASDF 3.1.5) are always
     considered FORCED-NOT, and even their ‘.asd’ are not refreshed from
     the filesystem.  *Note Miscellaneous Functions::.

     To see what ‘operate’ would do, you can use:
          (asdf:traverse operation-class system-name)

 -- Function: make-operation OPERATION-CLASS &rest INITARGS

     The INITARGS are passed to ‘make-instance’ call when creating the
     operation object.

     *Note:*INITARGS for ‘operation’s are now deprecated, and will be
     removed from ASDF in the near future.

     *Note:* ‘operation’ instances must *never* be created using
     ‘make-instance’ directly: only through ‘make-operation’.  Attempts
     to directly make ‘operation’ instances will cause a run-time error.


File: asdf.info,  Node: Predefined operations of ASDF,  Next: Creating new operations,  Prev: Operations,  Up: Operations

7.1.1 Predefined operations of ASDF
-----------------------------------

All the operations described in this section are in the ‘asdf’ package.
They are invoked via the ‘operate’ generic function.

     (asdf:operate 'asdf:OPERATION-NAME :SYSTEM-NAME {OPERATION-OPTIONS ...})

 -- Operation: compile-op

     This operation compiles the specified component.  A
     ‘cl-source-file’ will be ‘compile-file’’d.  All the children and
     dependencies of a system or module will be recursively compiled by
     ‘compile-op’.

     ‘compile-op’ depends on ‘prepare-op’ which itself depends on a
     ‘load-op’ of all of a component’s dependencies, as well as of its
     parent’s dependencies.  When ‘operate’ is called on ‘compile-op’,
     all these dependencies will be loaded as well as compiled; yet,
     some parts of the system main remain unloaded, because nothing
     depends on them.  Use ‘load-op’ to load a system.

 -- Operation: load-op

     This operation loads the compiled code for a specified component.
     A ‘cl-source-file’ will have its compiled fasl ‘load’ed, which fasl
     is the output of ‘compile-op’ that ‘load-op’ depends on.

     ‘load-op’ will recursively load all the children of a system or
     module.

     ‘load-op’ also depends on ‘prepare-op’ which itself depends on a
     ‘load-op’ of all of a component’s dependencies, as well as of its
     parent’s dependencies.

 -- Operation: prepare-op

     This operation ensures that the dependencies of a component and its
     recursive parents are loaded (as per ‘load-op’), as a prerequisite
     before ‘compile-op’ and ‘load-op’ operations may be performed on a
     given component.

 -- Operation: load-source-op
 -- Operation: prepare-source-op

     ‘load-source-op’ will load the source for the files in a module
     rather than the compiled fasl output.  It has a ‘prepare-source-op’
     analog to ‘prepare-op’, that ensures the dependencies are
     themselves loaded via ‘load-source-op’.

 -- Operation: test-op

     This operation will perform some tests on the module.  The default
     method will do nothing.  The default dependency is to require
     ‘load-op’ to be performed on the module first.  Its default
     ‘operation-done-p’ method returns ‘nil’, which means that the
     operation is _never_ done – we assume that if you invoke the
     ‘test-op’, you want to test the system, even if you have already
     done so.

     The results of this operation are not defined by ASDF. It has
     proven difficult to define how the test operation should signal its
     results to the user in a way that is compatible with all of the
     various test libraries and test techniques in use in the community,
     and given the fact that ASDF operations do not return a value
     indicating success or failure.  For those willing to go to the
     effort, we suggest defining conditions to signal when a ‘test-op’
     fails, and storing in those conditions information that describes
     which tests fail.

     People typically define a separate test _system_ to hold the tests.
     Doing this avoids unnecessarily adding a test framework as a
     dependency on a library.  For example, one might have
          (defsystem "foo"
            :in-order-to ((test-op (test-op "foo/test")))
           ...)

          (defsystem "foo/test"
            :depends-on ("foo" "fiveam") ; fiveam is a test framework library
            ...)

     Then one defines ‘perform’ methods on ‘test-op’ such as the
     following:
          (defsystem "foo/test"
            :depends-on ("foo" "fiveam") ; fiveam is a test framework library
            :perform (test-op (o s)
                              (uiop:symbol-call :fiveam '#:run!
                                 (uiop:find-symbol* '#:foo-test-suite
                                                      :foo-tests)))
            ...)

 -- Operation: compile-bundle-op
 -- Operation: monolithic-compile-bundle-op
 -- Operation: load-bundle-op
 -- Operation: monolithic-load-bundle-op
 -- Operation: deliver-asd-op
 -- Operation: monolithic-deliver-asd-op
 -- Operation: lib-op
 -- Operation: monolithic-lib-op
 -- Operation: dll-op
 -- Operation: monolithic-dll-op
 -- Operation: image-op
 -- Operation: program-op

     These are “bundle” operations, that can create a single-file
     “bundle” for all the contents of each system in an application, or
     for the entire application.

     ‘compile-bundle-op’ will create a single fasl file for each of the
     systems needed, grouping all its many fasls in one, so you can
     deliver each system as a single fasl.
     ‘monolithic-compile-bundle-op’ will create a single fasl file for
     the target system and all its dependencies, so you can deliver your
     entire application as a single fasl.  ‘load-bundle-op’ will load
     the output of ‘compile-bundle-op’.  Note that if the output is not
     up-to-date, ‘compile-bundle-op’ may load the intermediate fasls as
     a side-effect.  Bundling fasls together matters a lot on ECL, where
     the dynamic linking involved in loading tens of individual fasls
     can be noticeably more expensive than loading a single one.

     NB: ‘compile-bundle-op’, ‘monolithic-compile-bundle-op’,
     ‘load-bundle-op’, ‘monolithic-load-bundle-op’, ‘deliver-asd-op’,
     ‘monolithic-deliver-asd-op’ were respectively called ‘fasl-op’,
     ‘monolithic-fasl-op’, ‘load-fasl-op’, ‘monolithic-load-fasl-op’,
     ‘binary-op’, ‘monolithic-binary-op’ before ASDF 3.1.  The old names
     still exist for backward compatibility, though they poorly label
     what is going on.

     Once you have created a fasl with ‘compile-bundle-op’, you can use
     ‘precompiled-system’ to deliver it in a way that is compatible with
     clients having dependencies on your system, whether it is
     distributed as source or as a single binary; the ‘.asd’ file to be
     delivered with the fasl will look like this:
          (defsystem :mysystem :class :precompiled-system
            :fasl (some expression that will evaluate to a pathname))
     Or you can use ‘deliver-asd-op’ to let ASDF create such a system
     for you as well as the ‘compile-bundle-op’ output, or
     ‘monolithic-deliver-asd-op’.  This allows you to deliver code for
     your systems or applications as a single file.  Of course, if you
     want to test the result in the current image, _before_ you try to
     use any newly created ‘.asd’ files, you should not forget to
     ‘(asdf:clear-configuration)’ or at least
     ‘(asdf:clear-source-registry)’, so it re-populates the
     source-registry from the filesystem.

     The ‘program-op’ operation will create an executable program from
     the specified system and its dependencies.  You can use UIOP for
     its pre-image-dump hooks, its post-image-restore hooks, and its
     access to command-line arguments.  And you can specify an entry
     point ‘my-app:main’ by specifying in your ‘defsystem’ the option
     ‘:entry-point "my-app:main"’.  Depending on your implementation,
     running ‘(asdf:operate 'asdf:program-op :my-app)’ may quit the
     current Lisp image upon completion.  See the example in
     ‘test/hello-world-example.asd’ and ‘test/hello.lisp’, as built and
     tested by ‘test/test-program.script’ and
     ‘test/make-hello-world.lisp’.  ‘image-op’ will dump an image that
     may not be standalone and does not start its own function, but
     follows the usual execution convention of the underlying Lisp, just
     with more code pre-loaded, for use as an intermediate build result
     or with a wrapper invocation script.

     There is also ‘lib-op’ for building a linkable ‘.a’ file (Windows:
     ‘.lib’) from all linkable object dependencies (FFI files, and on
     ECL, Lisp files too), and its monolithic equivalent
     ‘monolithic-lib-op’.  And there is also ‘dll-op’ (respectively its
     monolithic equivalent ‘monolithic-dll-op’) for building a linkable
     ‘.so’ file (Windows: ‘.dll’, MacOS X: ‘.dynlib’) to create a single
     dynamic library for all the extra FFI code to be linked into each
     of your systems (respectively your entire application).

     All these “bundle” operations are available since ASDF 3 on all
     actively supported Lisp implementations, but may be unavailable on
     unmaintained legacy implementations.  This functionality was
     previously available for select implementations, as part of a
     separate system ‘asdf-bundle’, itself descended from the ECL-only
     ‘asdf-ecl’.

     The pathname of the output of bundle operations is subject to
     output-translation as usual, unless the operation is equal to the
     ‘:build-operation’ argument to ‘defsystem’.  This behaviour is not
     very satisfactory and may change in the future.  Maybe you have
     suggestions on how to better configure it?

 -- Operation: concatenate-source-op
 -- Operation: monolithic-concatenate-source-op
 -- Operation: load-concatenated-source-op
 -- Operation: compile-concatenated-source-op
 -- Operation: load-compiled-concatenated-source-op
 -- Operation: monolithic-load-concatenated-source-op
 -- Operation: monolithic-compile-concatenated-source-op
 -- Operation: monolithic-load-compiled-concatenated-source-op

     These operations, as their respective names indicate, will
     concatenate all the ‘cl-source-file’ source files in a system (or
     in a system and all its dependencies, if monolithic), in the order
     defined by dependencies, then load the result, or compile and then
     load the result.

     These operations are useful to deliver a system or application as a
     single source file, and for testing that said file loads properly,
     or compiles and then loads properly.

     ASDF itself is delivered as a single source file this way, using
     ‘monolithic-concatenate-source-op’, prepending a prelude and the
     ‘uiop’ library before the ‘asdf/defsystem’ system itself.

   See also FAQ entries *note What happened to the bundle operations::
and *note How can I produce a binary at a specific path from sources at
a specific path::.


File: asdf.info,  Node: Creating new operations,  Prev: Predefined operations of ASDF,  Up: Operations

7.1.2 Creating new operations
-----------------------------

ASDF was designed to be extensible in an object-oriented fashion.  To
teach ASDF new tricks, a programmer can implement the behaviour he wants
by creating a subclass of ‘operation’.

   ASDF’s pre-defined operations are in no way “privileged”, but it is
requested that developers never use the ‘asdf’ package for operations
they develop themselves.  The rationale for this rule is that we don’t
want to establish a “global asdf operation name registry”, but also want
to avoid name clashes.

   Your operation _must_ usually provide methods for one or more of the
following generic functions:

   • ‘perform’ Unless your operation, like ‘prepare-op’, is for
     dependency propagation only, the most important function for which
     to define a method is usually ‘perform’, which will be called to
     perform the operation on a specified component, after all
     dependencies have been performed.

     The ‘perform’ method must call ‘input-files’ and ‘output-files’
     (see below) to locate its inputs and outputs, because the user is
     allowed to override the method or tweak the output-translation
     mechanism.  Perform should only use the primary value returned by
     ‘output-files’.  If one and only one output file is expected, it
     can call ‘output-file’ that checks that this is the case and
     returns the first and only list element.

   • ‘output-files’ If your perform method has any output, you must
     define a method for this function.  for ASDF to determine where the
     outputs of performing operation lie.

     Your method may return two values, a list of pathnames, and a
     boolean.  If the boolean is ‘nil’ (or you fail to return multiple
     values), then enclosing ‘:around’ methods may translate these
     pathnames, e.g.  to ensure object files are somehow stored in some
     implementation-dependent cache.  If the boolean is ‘t’ then the
     pathnames are marked not be translated by the enclosing ‘:around’
     method.

   • ‘component-depends-on’ If the action of performing the operation on
     a component has dependencies, you must define a method on
     ‘component-depends-on’.

     Your method will take as specialized arguments an operation and a
     component which together identify an action, and return a list of
     entries describing actions that this action depends on.  The format
     of entries is described below.

     It is _strongly_ advised that you should always append the results
     of ‘(call-next-method)’ to the results of your method, or
     “interesting” failures will likely occur, unless you’re a true
     specialist of ASDF internals.  It is unhappily too late to
     compatibly use the ‘append’ method combination, but conceptually
     that’s the protocol that is being manually implemented.

     Each entry returned by ‘component-depends-on’ is itself a list.

     The first element of an entry is an operation designator: either an
     operation object designating itself, or a symbol that names an
     operation class (that ASDF will instantiate using
     ‘make-operation’).  For instance, ‘load-op’, ‘compile-op’ and
     ‘prepare-op’ are common such names, denoting the respective
     operations.

     The rest of each entry is a list of component designators: either a
     component object designating itself, or an identifier to be used
     with ‘find-component’.  ‘find-component’ will be called with the
     current component’s parent as parent, and the identifier as second
     argument.  The identifier is typically a string, a symbol (to be
     downcased as per ‘coerce-name’), or a list of strings or symbols.
     In particular, the empty list ‘nil’ denotes the parent itself.

   An operation _may_ provide methods for the following generic
functions:

   • ‘input-files’ A method for this function is often not needed, since
     ASDF has a pretty clever default ‘input-files’ mechanism.  You only
     need create a method if there are multiple ultimate input files.
     Most operations inherit from ‘selfward-operation’, which
     appropriately sets the input-files to include the source file
     itself.

      -- Function: input-files operation component
          Return a list of pathnames that represent the input to
          OPERATION performed on COMPONENT.

   • ‘operation-done-p’ You only need to define a method on that
     function if you can detect conditions that invalidate previous runs
     of the operation, even though no filesystem timestamp has changed,
     in which case you return ‘nil’ (the default is ‘t’).

     For instance, the method for ‘test-op’ always returns ‘nil’, so
     that tests are always run afresh.  Of course, the ‘test-op’ for
     your system could depend on a deterministically repeatable
     ‘test-report-op’, and just read the results from the report files,
     in which case you could have this method return ‘t’.

   Operations that print output should send that output to the standard
CL stream ‘*standard-output*’, as the Lisp compiler and loader do.


File: asdf.info,  Node: Components,  Next: Dependencies,  Prev: Operations,  Up: The object model of ASDF

7.2 Components
==============

A ‘component’ represents an individual source file or a group of source
files, and the things that get transformed into.  A ‘system’ is a
component at the top level of the component hierarchy, that can be found
via ‘find-system’.  A ‘source-file’ is a component representing a single
source-file and the successive output files into which it is
transformed.  A ‘module’ is an intermediate component itself grouping
several other components, themselves source-files or further modules.

   A “system designator” is a system itself, or a string or symbol that
behaves just like any other component name (including with regard to the
case conversion rules for component names).

   A “component designator”, relative to a base component, is either a
component itself, or a string or symbol, or a list of designators.

 -- Function: find-system system-designator &optional (error-p t)

     Given a system designator, ‘find-system’ finds and returns a
     system.  If no system is found, an error of type
     ‘missing-component’ is thrown, or ‘nil’ is returned if ‘error-p’ is
     false.

     To find and update systems, ‘find-system’ funcalls each element in
     the ‘*system-definition-search-functions*’ list, expecting a
     pathname to be returned, or a system object, from which a pathname
     may be extracted, and that will be registered.  The resulting
     pathname (if any) is loaded if one of the following conditions is
     true:

        • there is no system of that name in memory
        • the pathname is different from that which was previously
          loaded
        • the file’s ‘last-modified’ time exceeds the ‘last-modified’
          time of the system in memory

     When system definitions are loaded from ‘.asd’ files, they are
     implicitly loaded into the ‘ASDF-USER’ package, which uses ‘ASDF’,
     ‘UIOP’ and ‘UIOP/COMMON-LISP’(1) Programmers who do anything
     non-trivial in a ‘.asd’ file, such as defining new variables,
     functions or classes, should include ‘defpackage’ and ‘in-package’
     forms in this file, so they will not overwrite each others’
     extensions.  Such forms might also help the files behave
     identically if loaded manually with ‘cl:load’ for development or
     debugging, though we recommend you use the function
     ‘asdf::load-asd’ instead, which the ‘slime-asdf’ contrib knows
     about.

     The default value of ‘*system-definition-search-functions*’ is a
     list of three functions.  The first function looks in each of the
     directories given by evaluating members of ‘*central-registry*’ for
     a file whose name is the name of the system and whose type is
     ‘asd’; the first such file is returned, whether or not it turns out
     to actually define the appropriate system.  The second function
     does something similar, for the directories specified in the
     ‘source-registry’, but searches the filesystem only once and caches
     its results.  The third function makes the
     ‘package-inferred-system’ extension work, *note The
     package-inferred-system extension::.

     Because of the way these search functions are defined, you should
     put the definition for a system FOO in a file named ‘foo.asd’, in a
     directory that is in the central registry or which can be found
     using the source registry configuration.

     It is often useful to define multiple systems in a same file, but
     ASDF can only locate a system’s definition file based on the system
     name.  For this reason, ASDF 3’s system search algorithm has been
     extended to allow a file ‘foo.asd’ to contain secondary systems
     named FOO/BAR, FOO/BAZ, FOO/QUUX, etc., in addition to the primary
     system named FOO.  The first component of a system name, separated
     by the slash character, ‘/’, is called the primary name of a
     system.  The primary name may be extracted by function
     ‘asdf::primary-system-name’; when ASDF 3 is told to find a system
     whose name has a slash, it will first attempt to load the
     corresponding primary system, and will thus see any such
     definitions, and/or any definition of a
     ‘package-inferred-system’.(2)  If your file ‘foo.asd’ also defines
     systems that do not follow this convention, e.g., a system named
     FOO-TEST, ASDF will not be able to automatically locate a
     definition for these systems, and will only see their definition if
     you explicitly find or load the primary system using e.g.
     ‘(asdf:find-system "foo")’ before you try to use them.  We strongly
     recommend against this practice, though it is currently supported
     for backward compatibility.

 -- Function: primary-system-name name

     Internal (not exported) function, ‘asdf::primary-system-name’.
     Returns the primary system name (the portion before the slash, ‘/’,
     in a secondary system name) from NAME.

 -- Function: locate-system name

     This function should typically _not_ be invoked directly.  It is
     exported as part of the API only for programmers who wish to
     provide their own ‘*system-definition-search-functions*’.

     Given a system NAME designator, try to locate where to load the
     system definition from.  Returns five values: FOUNDP, FOUND-SYSTEM,
     PATHNAME, PREVIOUS, and PREVIOUS-TIME.  FOUNDP is true when a
     system was found, either a new as yet unregistered one, or a
     previously registered one.  The FOUND-SYSTEM return value will be a
     ‘system’ object, if a system definition is found in your source
     registry.  The system definition will _not_ be loaded if it hasn’t
     been loaded already.  PATHNAME when not null is a path from which
     to load the system, either associated with FOUND-SYSTEM, or with
     the PREVIOUS system.  If PREVIOUS is not null, it will be a
     _previously loaded_ ‘system’ object of the same name (note that the
     system _definition_ is previously-loaded: the system itself may or
     may not be).  PREVIOUS-TIME when not null is the timestamp of the
     previous system definition file, at the time when the PREVIOUS
     system definition was loaded.

     For example, if your current registry has ‘foo.asd’ in
     ‘/current/path/to/foo.asd’, but system ‘foo’ was previously loaded
     from ‘/previous/path/to/foo.asd’ then LOCATE-SYSTEM will return the
     following values:
       1. FOUNDP will be ‘t’,
       2. FOUND-SYSTEM will be ‘nil’,
       3. PATHNAME will be ‘#p"/current/path/to/foo.asd"’,
       4. PREVIOUS will be an object of type ‘SYSTEM’ with
          ‘system-source-file’ slot value of
          ‘#p"/previous/path/to/foo.asd"’
       5. PREVIOUS-TIME will be the timestamp of
          ‘#p"/previous/path/to/foo.asd"’ at the time it was loaded.

 -- Function: find-component base path

     Given a BASE component (or designator for such), and a PATH, find
     the component designated by the PATH starting from the BASE.

     If PATH is a component object, it designates itself, independently
     from the base.

     If PATH is a string, or symbol denoting a string via ‘coerce-name’,
     then BASE is resolved to a component object, which must be a system
     or module, and the designated component is the child named by the
     PATH.

     If PATH is a ‘cons’ cell, ‘find-component’ with the base and the
     ‘car’ of the PATH, and the resulting object is used as the base for
     a tail call to ‘find-component’ with the ‘car’ of the PATH.

     If BASE is a component object, it designates itself.

     If BASE is null, then PATH is used as the base, with ‘nil’ as the
     path.

     If BASE is a string, or symbol denoting a string via ‘coerce-name’,
     it designates a system as per ‘find-system’.

     If BASE is a ‘cons’ cell, it designates the component found by
     ‘find-component’ with its ‘car’ as base and ‘cdr’ as path.

* Menu:

* Common attributes of components::
* Pre-defined subclasses of component::
* Creating new component types::

   ---------- Footnotes ----------

   (1) Note that between releases 2.27 and 3.0.3, only ‘UIOP/PACKAGE’,
not all of ‘UIOP’, was used; if you want your code to work with releases
earlier than 3.1.2, you may have to explicitly define a package that
uses ‘UIOP’, or use proper package prefix to your symbols, as in
‘uiop:version<’.

   (2) ASDF 2.26 and earlier versions do not support this primary system
name convention.  With these versions of ASDF you must explicitly load
‘foo.asd’ before you can use system FOO/BAR defined therein, e.g.  using
‘(asdf:find-system "foo")’.  We do not support ASDF 2, and recommend
that you should upgrade to ASDF 3.


File: asdf.info,  Node: Common attributes of components,  Next: Pre-defined subclasses of component,  Prev: Components,  Up: Components

7.2.1 Common attributes of components
-------------------------------------

All components, regardless of type, have the following attributes.  All
attributes except ‘name’ are optional.

7.2.1.1 Name
............

A component name is a string or a symbol.  If a symbol, its name is
taken and lowercased.  This translation is performed by the exported
function ‘coerce-name’.

   Unless overridden by a ‘:pathname’ attribute, the name will be
interpreted as a pathname specifier according to a Unix-style syntax.
*Note Pathname specifiers::.

7.2.1.2 Version identifier
..........................

This optional attribute specifies a version for the current component.
The version should typically be a string of integers separated by dots,
for example ‘1.0.11’.  *Note Version specifiers::.

   A version may then be queried by the generic function
‘version-satisfies’, to see if ‘:version’ dependencies are satisfied,
and when specifying dependencies, a constraint of minimal version to
satisfy can be specified using e.g.  ‘(:version "mydepname" "1.0.11")’.

   Note that in the wild, we typically see version numbering only on
components of type ‘system’.  Presumably it is much less useful within a
given system, wherein the library author is responsible to keep the
various files in synch.

7.2.1.3 Required features
.........................

Traditionally defsystem users have used ‘#+’ reader conditionals to
include or exclude specific per-implementation files.  For example,
CFFI, the portable C foreign function interface contained lines like:
          #+sbcl       (:file "cffi-sbcl")
   An unfortunate side effect of this approach is that no single
implementation can read the entire system.  This causes problems if, for
example, one wished to design an ‘archive-op’ that would create an
archive file containing all the sources, since for example the file
‘cffi-sbcl.lisp’ above would be invisible when running the ‘archive-op’
on any implementation other than SBCL.

   Starting with ASDF 3, components may therefore have an ‘:if-feature’
option.  The value of this option should be a feature expression using
the same syntax as ‘#+’ does.  If that feature expression evaluates to
false, any reference to the component will be ignored during
compilation, loading and/or linking.  Since the expression is read by
the normal reader, you must explicitly prefix your symbols with ‘:’ so
they be read as keywords; this is as contrasted with the ‘#+’ syntax
that implicitly reads symbols in the keyword package by default.

   For instance, ‘:if-feature (:and :x86 (:or :sbcl :cmu :scl))’
specifies that the given component is only to be compiled and loaded
when the implementation is SBCL, CMUCL or Scieneer CL on an x86 machine.
You cannot write it as ‘:if-feature (and x86 (or sbcl cmu scl))’ since
the symbols would not be read as keywords.

   *Note if-feature option::.

7.2.1.4 Dependencies
....................

This attribute specifies dependencies of the component on its siblings.
It is optional but often necessary.

   There is an excitingly complicated relationship between the initarg
and the method that you use to ask about dependencies

   Dependencies are between (operation component) pairs.  In your
initargs for the component, you can say

     :in-order-to ((compile-op (load-op "a" "b") (compile-op "c"))
                   (load-op (load-op "foo")))

   This means the following things:
   • before performing compile-op on this component, we must perform
     load-op on A and B, and compile-op on C,
   • before performing ‘load-op’, we have to load FOO

   The syntax is approximately

(this-op @{(other-op required-components)@}+)

simple-component-name := string
                      |  symbol

required-components := simple-component-name
                     | (required-components required-components)

component-name := simple-component-name
                | (:version simple-component-name minimum-version-object)

   Side note:

   This is on a par with what ACL defsystem does.  mk-defsystem is less
general: it has an implied dependency

  for all source file x, (load x) depends on (compile x)

   and using a ‘:depends-on’ argument to say that B depends on A
_actually_ means that

  (compile b) depends on (load a)

   This is insufficient for e.g.  the McCLIM system, which requires that
all the files are loaded before any of them can be compiled ]

   End side note

   In ASDF, the dependency information for a given component and
operation can be queried using ‘(component-depends-on operation
component)’, which returns a list

     ((load-op "a") (load-op "b") (compile-op "c") ...)

   ‘component-depends-on’ can be subclassed for more specific
component/operation types: these need to ‘(call-next-method)’ and append
the answer to their dependency, unless they have a good reason for
completely overriding the default dependencies.

   If it weren’t for CLISP, we’d be using ‘LIST’ method combination to
do this transparently.  But, we need to support CLISP. If you have the
time for some CLISP hacking, I’m sure they’d welcome your fixes.

   A minimal version can be specified for a component you depend on
(typically another system), by specifying ‘(:version "other-system"
"1.2.3")’ instead of simply ‘"other-system"’ as the dependency.  See the
discussion of the semantics of ‘:version’ in the defsystem grammar.

7.2.1.5 pathname
................

This attribute is optional and if absent (which is the usual case), the
component name will be used.

   *Note Pathname specifiers::, for an explanation of how this attribute
is interpreted.

   Note that the ‘defsystem’ macro (used to create a “top-level” system)
does additional processing to set the filesystem location of the top
component in that system.  This is detailed elsewhere.  *Note Defining
systems with defsystem::.

   To find the CL pathname corresponding to a component, use

 -- Function: component-pathname component
     Returns the pathname corresponding to COMPONENT.  For components
     such as source files, this will be a filename pathname.  For
     example:

          CL-USER> (asdf:component-pathname (asdf:find-system "xmls"))
          #P"/Users/rpg/lisp/xmls/"

     and

          CL-USER> (asdf:component-pathname
                     (asdf:find-component
                        (asdf:find-system "xmls") "xmls"))
          #P"/Users/rpg/lisp/xmls/xmls.lisp"

7.2.1.6 Properties
..................

This attribute is optional.

   Packaging systems often require information about files or systems in
addition to that specified by ASDF’s pre-defined component attributes.
Programs that create vendor packages out of ASDF systems therefore have
to create “placeholder” information to satisfy these systems.  Sometimes
the creator of an ASDF system may know the additional information and
wish to provide it directly.

   ‘(component-property component property-name)’ and associated ‘setf’
method will allow the programmatic update of this information.  Property
names are compared as if by ‘EQL’, so use symbols or keywords or
something.

* Menu:

* Pre-defined subclasses of component::
* Creating new component types::


File: asdf.info,  Node: Pre-defined subclasses of component,  Next: Creating new component types,  Prev: Common attributes of components,  Up: Components

7.2.2 Pre-defined subclasses of component
-----------------------------------------

 -- Component: source-file

     A source file is any file that the system does not know how to
     generate from other components of the system.

     Note that this is not necessarily the same thing as “a file
     containing data that is typically fed to a compiler”.  If a file is
     generated by some pre-processor stage (e.g.  a ‘.h’ file from
     ‘.h.in’ by autoconf) then it is not, by this definition, a source
     file.  Conversely, we might have a graphic file that cannot be
     automatically regenerated, or a proprietary shared library that we
     received as a binary: these do count as source files for our
     purposes.

     Subclasses of source-file exist for various languages.  _FIXME:
     describe these._

 -- Component: module

     A module is a collection of sub-components.

     A module component has the following extra initargs:

        • ‘:components’ the components contained in this module

        • ‘:default-component-class’ All children components which don’t
          specify their class explicitly are inferred to be of this
          type.

        • ‘:if-component-dep-fails’ This attribute was removed in ASDF
          3.  Do not use it.  Use ‘:if-feature’ instead (*note
          required-features::, and *note if-feature option::).

        • ‘:serial’ When this attribute is set, each subcomponent of
          this component is assumed to depend on all subcomponents
          before it in the list given to ‘:components’, i.e.  all of
          them are loaded before a compile or load operation is
          performed on it.

     The default operation knows how to traverse a module, so most
     operations will not need to provide methods specialised on modules.

     ‘module’ may be subclassed to represent components such as
     foreign-language linked libraries or archive files.

 -- Component: system

     ‘system’ is a subclass of ‘module’.

     A system is a module with a few extra attributes for documentation
     purposes; these are given elsewhere.  *Note The defsystem
     grammar::.

     Users can create new classes for their systems: the default
     ‘defsystem’ macro takes a ‘:class’ keyword argument.


File: asdf.info,  Node: Creating new component types,  Prev: Pre-defined subclasses of component,  Up: Components

7.2.3 Creating new component types
----------------------------------

New component types are defined by subclassing one of the existing
component classes and specializing methods on the new component class.

   As an example, suppose we have some implementation-dependent
functionality that we want to isolate in one subdirectory per Lisp
implementation our system supports.  We create a subclass of
‘cl-source-file’:

     (defclass unportable-cl-source-file (cl-source-file)
       ())

   Function ‘asdf:implementation-type’ (exported since 2.014.14) gives
us the name of the subdirectory.  All that’s left is to define how to
calculate the pathname of an ‘unportable-cl-source-file’.

     (defmethod component-pathname ((component unportable-cl-source-file))
       (merge-pathnames*
        (parse-unix-namestring (format nil "~(~A~)/" (asdf:implementation-type)))
        (call-next-method)))

   The new component type is used in a ‘defsystem’ form in this way:

     (defsystem :foo
         :components
         ((:file "packages")
          ...
          (:unportable-cl-source-file "threads"
           :depends-on ("packages" ...))
          ...
         )


File: asdf.info,  Node: Dependencies,  Next: Functions,  Prev: Components,  Up: The object model of ASDF

7.3 Dependencies
================

To be successfully build-able, this graph of actions must be acyclic.
If, as a user, extender or implementer of ASDF, you introduce a cycle
into the dependency graph, ASDF will fail loudly.  To clearly
distinguish the direction of dependencies, ASDF 3 uses the words
_requiring_ and _required_ as applied to an action depending on the
other: the requiring action ‘depends-on’ the completion of all required
actions before it may itself be ‘perform’ed.

   Using the ‘defsystem’ syntax, users may easily express direct
dependencies along the graph of the object hierarchy: between a
component and its parent, its children, and its siblings.  By defining
custom CLOS methods, you can express more elaborate dependencies as you
wish.  Most common operations, such as ‘load-op’, ‘compile-op’ or
‘load-source-op’ are automatically propagate “downward” the component
hierarchy and are “covariant” with it: to act the operation on the
parent module, you must first act it on all the children components,
with the action on the parent being parent of the action on each child.
Other operations, such as ‘prepare-op’ and ‘prepare-source-op’
(introduced in ASDF 3) are automatically propagated “upward” the
component hierarchy and are “contravariant” with it: to perform the
operation of preparing for compilation of a child component, you must
perform the operation of preparing for compilation of its parent
component, and so on, ensuring that all the parent’s dependencies are
(compiled and) loaded before the child component may be compiled and
loaded.  Yet other operations, such as ‘test-op’ or ‘load-bundle-op’
remain at the system level, and are not propagated along the hierarchy,
but instead do something global on the system.


File: asdf.info,  Node: Functions,  Next: Parsing system definitions,  Prev: Dependencies,  Up: The object model of ASDF

7.4 Functions
=============

 -- Function: version-satisfies VERSION VERSION-SPEC
     Does VERSION satisfy the VERSION-SPEC.  A generic function.  ASDF
     provides built-in methods for VERSION being a ‘component’ or
     ‘string’.  VERSION-SPEC should be a string.  If it’s a component,
     its version is extracted as a string before further processing.

     A version string satisfies the version-spec if after parsing, the
     former is no older than the latter.  Therefore ‘"1.9.1"’, ‘"1.9.2"’
     and ‘"1.10"’ all satisfy ‘"1.9.1"’, but ‘"1.8.4"’ or ‘"1.9"’ do
     not.  For more information about how ‘version-satisfies’ parses and
     interprets version strings and specifications, *note Version
     specifiers:: and *note Common attributes of components::.

     Note that in versions of ASDF prior to 3.0.1, including the entire
     ASDF 1 and ASDF 2 series, ‘version-satisfies’ would also require
     that the version and the version-spec have the same major version
     number (the first integer in the list); if the major version
     differed, the version would be considered as not matching the spec.
     But that feature was not documented, therefore presumably not
     relied upon, whereas it was a nuisance to several users.  Starting
     with ASDF 3.0.1, ‘version-satisfies’ does not treat the major
     version number specially, and returns T simply if the first
     argument designates a version that isn’t older than the one
     specified as a second argument.  If needs be, the ‘(:version ...)’
     syntax for specifying dependencies could be in the future extended
     to specify an exclusive upper bound for compatible versions as well
     as an inclusive lower bound.


File: asdf.info,  Node: Parsing system definitions,  Prev: Functions,  Up: The object model of ASDF

7.5 Parsing system definitions
==============================

Thanks to Eric Timmons, ASDF now provides hooks to extend how it parses
‘defsystem’ forms.

   *Warning!*  These interfaces are experimental, and as such are not
exported from the ASDF package yet.  We plan to export them in ASDF
3.4.0.  If you use them before they are exported, please subscribe to
<https://gitlab.common-lisp.net/asdf/asdf/-/issues/76> so you are made
aware of any changes.

 -- Function: parse-component-form PARENT OPTIONS &key
          PREVIOUS-SERIAL-COMPONENTS

     This is the core function for parsing a system definition.  At the
     moment, we do not expect ASDF extenders to modify this function.

     When being called on a ‘component’ of type ‘system’ (i.e., inside
     the ‘defsystem’ macro), PARENT will be ‘NIL’.

 -- Generic function: compute-component-children COMPONENT COMPONENTS
          SERIAL-P

     This generic function provides standard means for computing
     component children, but can be extended with additional methods by
     a programmer.

     Returns a list of children (of type ‘component’) for COMPONENT.
     COMPONENTS is a list of the explicitly defined children
     descriptions.  SERIAL-P is non-‘NIL’ if each child in COMPONENTS
     should depend on the previous children.

 -- Generic function: class-for-type PARENT TYPE-DESIGNATOR

     Return a ‘class’ designator to be used to instantiate a component
     whose type is specified by TYPE-DESIGNATOR in the context of
     PARENT, which should be either a ‘parent-component’ – or subclass
     thereof – or ‘nil’ (if the type designator is some class of
     system).

     This generic function provides a means for changing how ASDF
     translates type-designators (like ‘:file’) into CLOS classes.  It
     is intended for programmers to extend by adding new methods.

     *Warning!*  Adding new methods for ‘class-for-type’ is typically
     _not_ necessary: much can already be done by using
     ‘:default-component-class’ and defining (and explicitly calling
     for) new component types.


File: asdf.info,  Node: Controlling where ASDF searches for systems,  Next: Controlling where ASDF saves compiled files,  Prev: The object model of ASDF,  Up: Top

8 Controlling where ASDF searches for systems
*********************************************

* Menu:

* Configurations::
* Truenames and other dangers::
* XDG base directory::
* Backward Compatibility::
* Configuration DSL::
* Configuration Directories::
* Shell-friendly syntax for configuration::
* Search Algorithm::
* Caching Results::
* Configuration API::
* Introspection::
* Status::
* Rejected ideas::
* TODO::
* Credits for the source-registry::


File: asdf.info,  Node: Configurations,  Next: Truenames and other dangers,  Prev: Controlling where ASDF searches for systems,  Up: Controlling where ASDF searches for systems

8.1 Configurations
==================

Configurations specify paths where to find system files.

  1. The search registry may use some hardcoded wrapping registry
     specification.  This allows some implementations (notably SBCL) to
     specify where to find some special implementation-provided systems
     that need to precisely match the version of the implementation
     itself.

  2. An application may explicitly initialize the source-registry
     configuration using the configuration API (*note Configuration API:
     Controlling where ASDF searches for systems, below) in which case
     this takes precedence.  It may itself compute this configuration
     from the command-line, from a script, from its own configuration
     file, etc.

  3. The source registry will be configured from the environment
     variable ‘CL_SOURCE_REGISTRY’ if it exists.

  4. The source registry will be configured from user configuration file
     ‘$XDG_CONFIG_DIRS/common-lisp/source-registry.conf’ (which defaults
     to ‘~/.config/common-lisp/source-registry.conf’) if it exists.

  5. The source registry will be configured from user configuration
     directory ‘$XDG_CONFIG_DIRS/common-lisp/source-registry.conf.d/’
     (which defaults to ‘~/.config/common-lisp/source-registry.conf.d/’)
     if it exists.

  6. The source registry will be configured from default user
     configuration trees ‘~/common-lisp/’ (since ASDF 3.1.2 only),
     ‘~/.sbcl/systems/’ (on SBCL only),
     ‘$XDG_DATA_HOME/common-lisp/systems/’ (no recursion, link farm)
     ‘$XDG_DATA_HOME/common-lisp/source/’.  The ‘XDG_DATA_HOME’
     directory defaults to ‘~/.local/share/’.  On Windows, the
     ‘local-appdata’ and ‘appdata’ directories are used instead.

  7. The source registry will be configured from system configuration
     file ‘/etc/common-lisp/source-registry.conf’ if it exists.

  8. The source registry will be configured from system configuration
     directory ‘/etc/common-lisp/source-registry.conf.d/’ if it exists.

  9. The source registry will be configured from a default
     configuration.  This configuration may allow for
     implementation-specific systems to be found, for systems to be
     found the current directory (at the time that the configuration is
     initialized) as well as ‘:directory’ entries for
     ‘$XDG_DATA_DIRS/common-lisp/systems/’ and ‘:tree’ entries for
     ‘$XDG_DATA_DIRS/common-lisp/source/’, where ‘XDG_DATA_DIRS’
     defaults to ‘/usr/local/share’ and ‘/usr/share’ on Unix, and the
     ‘common-appdata’ directory on Windows.

  10. The source registry may include implementation-dependent
     directories that correspond to implementation-provided extensions.

   Each of these configurations is specified as an s-expression in a
trivial domain-specific language (defined below).  Additionally, a more
shell-friendly syntax is available for the environment variable (defined
yet below).

   Each of these configurations is only used if the previous
configuration explicitly or implicitly specifies that it includes its
inherited configuration.

   Additionally, some implementation-specific directories may be
automatically prepended to whatever directories are specified in
configuration files, no matter if the last one inherits or not.


File: asdf.info,  Node: Truenames and other dangers,  Next: XDG base directory,  Prev: Configurations,  Up: Controlling where ASDF searches for systems

8.2 Truenames and other dangers
===============================

One great innovation of the original ASDF was its ability to leverage
‘CL:TRUENAME’ to locate where your source code was and where to build
it, allowing for symlink farms as a simple but effective configuration
mechanism that is easy to control programmatically.  ASDF 3 still
supports this configuration style, and it is enabled by default; however
we recommend you instead use our source-registry configuration mechanism
described below, because it is easier to setup in a portable way across
users and implementations.

   Additionally, some people dislike truename, either because it is very
slow on their system, or because they are using content-addressed
storage where the truename of a file is related to a digest of its
individual contents, and not to other files in the same intended
project.  For these people, ASDF 3 allows to eschew the ‘TRUENAME’
mechanism, by setting the variable ASDF:*RESOLVE-SYMLINKS* to ‘nil’.

   PS: Yes, if you haven’t read Vernor Vinge’s short but great classic
“True Names...  and Other Dangers” then you’re in for a treat.


File: asdf.info,  Node: XDG base directory,  Next: Backward Compatibility,  Prev: Truenames and other dangers,  Up: Controlling where ASDF searches for systems

8.3 XDG base directory
======================

Note that we purport to respect the XDG base directory specification as
to where configuration files are located, where data files are located,
where output file caches are located.  Mentions of XDG variables refer
to that document.

   <http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html>

   This specification allows the user to specify some environment
variables to customize how applications behave to his preferences.

   On Windows platforms, even when not using Cygwin, and starting with
ASDF 3.1.5, we still do a best effort at following the XDG base
directory specification, even though it doesn’t exactly fit common
practice for Windows applications.  However, we replace the fixed Unix
paths ‘~/.local’, ‘/usr/local’ and ‘/usr’ with their rough Windows
equivalent ‘Local AppData’, ‘AppData’, ‘Common AppData’, etc.  Since
support for querying the Windows registry is not possible to do in
reasonable amounts of portable Common Lisp code, ASDF 3 relies on the
environment variables that Windows usually exports, and are hopefully in
synch with the Windows registry.  If you care about the details, see
‘uiop/configuration.lisp’ and don’t hesitate to suggest improvements.


File: asdf.info,  Node: Backward Compatibility,  Next: Configuration DSL,  Prev: XDG base directory,  Up: Controlling where ASDF searches for systems

8.4 Backward Compatibility
==========================

For backward compatibility as well as to provide a practical backdoor
for hackers, ASDF will first search for ‘.asd’ files in the directories
specified in ‘asdf:*central-registry*’ before it searches in the source
registry above.

   *Note Configuring ASDF to find your systems — old style: Configuring
ASDF.

   By default, ‘asdf:*central-registry*’ will be empty.

   This old mechanism will therefore not affect you if you don’t use it,
but will take precedence over the new mechanism if you do use it.


File: asdf.info,  Node: Configuration DSL,  Next: Configuration Directories,  Prev: Backward Compatibility,  Up: Controlling where ASDF searches for systems

8.5 Configuration DSL
=====================

Here is the grammar of the s-expression (SEXP) DSL for source-registry
configuration:

     ;; A configuration is a single SEXP starting with the keyword
     ;; :source-registry followed by a list of directives.
     CONFIGURATION := (:source-registry DIRECTIVE ...)

     ;; A directive is one of the following:
     DIRECTIVE :=
         ;; INHERITANCE DIRECTIVE:
         ;; Your configuration expression MUST contain
         ;; exactly one of the following:
         :inherit-configuration |
         ;; splices inherited configuration (often specified last) or
         :ignore-inherited-configuration |
         ;; drop inherited configuration (specified anywhere)

         ;; forward compatibility directive (since ASDF 2.011.4), useful when
         ;; you want to use new configuration features but have to bootstrap
         ;; the newer required ASDF from an older release that doesn't
         ;; support said features:
         :ignore-invalid-entries |

         ;; add a single directory to be scanned (no recursion)
         (:directory DIRECTORY-PATHNAME-DESIGNATOR) |

         ;; add a directory hierarchy, recursing but
         ;; excluding specified patterns
         (:tree DIRECTORY-PATHNAME-DESIGNATOR) |

         ;; override the defaults for exclusion patterns
         (:exclude EXCLUSION-PATTERN ...) |
         ;; augment the defaults for exclusion patterns
         (:also-exclude EXCLUSION-PATTERN ...) |
         ;; Note that the scope of a an exclude pattern specification is
         ;; the rest of the current configuration expression or file.

         ;; splice the parsed contents of another config file
         (:include REGULAR-FILE-PATHNAME-DESIGNATOR) |

         ;; This directive specifies that some default must be spliced.
         :default-registry

     REGULAR-FILE-PATHNAME-DESIGNATOR
         := PATHNAME-DESIGNATOR ; interpreted as a file
     DIRECTORY-PATHNAME-DESIGNATOR
         := PATHNAME-DESIGNATOR ; interpreted as a directory

     PATHNAME-DESIGNATOR :=
         NIL | ;; Special: skip this entry.
         ABSOLUTE-COMPONENT-DESIGNATOR ;; see pathname DSL

     EXCLUSION-PATTERN := a string without wildcards, that will be matched
         exactly against the name of a any subdirectory in the directory
         component of a path. e.g. "_darcs" will match
         #p"/foo/bar/_darcs/src/bar.asd"

   Pathnames are designated using another DSL, shared with the
output-translations configuration DSL below.  The DSL is resolved by the
function ‘asdf::resolve-location’, to be documented and exported at some
point in the future.

     ABSOLUTE-COMPONENT-DESIGNATOR :=
         (ABSOLUTE-COMPONENT-DESIGNATOR RELATIVE-COMPONENT-DESIGNATOR ...) |
         STRING |
         ;; namestring (better be absolute or bust, directory assumed where
         ;; applicable).  In output-translations, directory is assumed and
         ;; **/*.*.* added if it's last.  On MCL, a MacOSX-style POSIX
         ;; namestring (for MacOS9 style, use #p"..."); Note that none of the
         ;; above applies to strings used in *central-registry*, which
         ;; doesn't use this DSL: they are processed as normal namestrings.
         ;; however, you can compute what you put in the *central-registry*
         ;; based on the results of say
         ;; (asdf::resolve-location "/Users/fare/cl/cl-foo/")
         PATHNAME |
         ;; pathname (better be an absolute path, or bust)
         ;; In output-translations, unless followed by relative components,
         ;; it better have appropriate wildcards, as in **/*.*.*
         :HOME | ; designates the user-homedir-pathname ~/
         :USER-CACHE | ; designates the default location for the user cache
         :HERE |
         ;; designates the location of the configuration file
         ;; (or *default-pathname-defaults*, if invoked interactively)
         :ROOT
         ;; magic, for output-translations source only: paths that are relative
         ;; to the root of the source host and device

     They keyword :SYSTEM-CACHE is not accepted in ASDF 3.1 and beyond: it
     was a security hazard.

     RELATIVE-COMPONENT-DESIGNATOR :=
         (RELATIVE-COMPONENT-DESIGNATOR RELATIVE-COMPONENT-DESIGNATOR ...) |
         STRING |
           ;; relative directory pathname as interpreted by
           ;; parse-unix-namestring.
           ;; In output translations, if last component, **/*.*.* is added
         PATHNAME | ; pathname; unless last component, directory is assumed.
         :IMPLEMENTATION |
            ;; directory based on implementation, e.g. sbcl-1.0.45-linux-x64
         :IMPLEMENTATION-TYPE |
            ;; a directory based on lisp-implementation-type only, e.g. sbcl
         :DEFAULT-DIRECTORY |
            ;; a relativized version of the default directory
         :*/ | ;; any direct subdirectory (since ASDF 2.011.4)
         :**/ | ;; any recursively inferior subdirectory (since ASDF 2.011.4)
         :*.*.* | ;; any file (since ASDF 2.011.4)

     The keywords :UID and :USERNAME are no longer supported.

   For instance, as a simple case, my
‘~/.config/common-lisp/source-registry.conf’, which is the default place
ASDF looks for this configuration, once contained:
     (:source-registry
       (:tree (:home "cl")) ;; will expand to e.g. "/home/joeluser/cl/"
       :inherit-configuration)


File: asdf.info,  Node: Configuration Directories,  Next: Shell-friendly syntax for configuration,  Prev: Configuration DSL,  Up: Controlling where ASDF searches for systems

8.6 Configuration Directories
=============================

Configuration directories consist in files each containing a list of
directives without any enclosing ‘(:source-registry ...)’ form.  The
files will be sorted by namestring as if by ‘string<’ and the lists of
directives of these files with be concatenated in order.  An implicit
‘:inherit-configuration’ will be included at the _end_ of the list.

   System-wide or per-user Common Lisp software distributions such as
Debian packages or some future version of ‘clbuild’ may then include
files such as ‘/etc/common-lisp/source-registry.conf.d/10-foo.conf’ or
‘~/.config/common-lisp/source-registry.conf.d/10-foo.conf’ to easily and
modularly register configuration information about software being
distributed.

   The convention is that, for sorting purposes, the names of files in
such a directory begin with two digits that determine the order in which
these entries will be read.  Also, the type of these files must be
‘.conf’, which not only simplifies the implementation by allowing for
more portable techniques in finding those files, but also makes it
trivial to disable a file, by renaming it to a different file type.

   Directories may be included by specifying a directory pathname or
namestring in an ‘:include’ directive, e.g.:

     	(:include "/foo/bar/")

   Hence, to achieve the same effect as my example
‘~/.config/common-lisp/source-registry.conf’ above, I could simply
create a file
‘~/.config/common-lisp/source-registry.conf.d/33-home-fare-cl.conf’
alone in its directory with the following contents:
     (:tree "/home/fare/cl/")

* Menu:

* The here directive::


File: asdf.info,  Node: The here directive,  Prev: Configuration Directories,  Up: Configuration Directories

8.6.1 The :here directive
-------------------------

The ‘:here’ directive is an absolute pathname designator that refers to
the directory containing the configuration file currently being
processed.

   The ‘:here’ directive is intended to simplify the delivery of complex
CL systems, and for easy configuration of projects shared through
revision control systems, in accordance with our design principle that
each participant should be able to provide all and only the information
available to him or her.

   Consider a person X who has set up the source code repository for a
complex project with a master directory ‘dir/’.  Ordinarily, one might
simply have the user add a directive that would look something like
this:
        (:tree "path/to/dir")
   But what if X knows that there are very large subtrees under dir that
are filled with, e.g., Java source code, image files for icons, etc.?
All of the asdf system definitions are contained in the subdirectories
‘dir/src/lisp/’ and ‘dir/extlib/lisp/’, and these are the only
directories that should be searched.

   In this case, X can put into ‘dir/’ a file ‘asdf.conf’ that contains
the following:
     (:source-registry
        (:tree (:here "src/lisp/"))
        (:tree (:here "extlib/lisp"))
        (:directory (:here "outlier/")))

   Then when someone else (call her Y) checks out a copy of this
repository, she need only add
     (:include "/path/to/my/checkout/directory/asdf.conf")
   to one of her previously-existing asdf source location configuration
files, or invoke ‘initialize-source-registry’ with a configuration form
containing that s-expression.  ASDF will find the .conf file that X has
provided, and then set up source locations within the working directory
according to X’s (relative) instructions.


File: asdf.info,  Node: Shell-friendly syntax for configuration,  Next: Search Algorithm,  Prev: Configuration Directories,  Up: Controlling where ASDF searches for systems

8.7 Shell-friendly syntax for configuration
===========================================

When considering environment variable ‘CL_SOURCE_REGISTRY’ ASDF will
skip to next configuration if it’s an empty string.  It will ‘READ’ the
string as a SEXP in the DSL if it begins with a paren ‘(’, otherwise it
will be interpreted much like ‘TEXINPUTS’, as a list of paths, where

   • paths are separated by a ‘:’ (colon) on Unix platforms (including
     cygwin), by a ‘;’ (semicolon) on other platforms (mainly, Windows).

   • each entry is a directory to add to the search path.

   • if the entry ends with a double slash ‘//’ then it instead
     indicates a tree in the subdirectories of which to recurse.

   • if the entry is the empty string (which may only appear once), then
     it indicates that the inherited configuration should be spliced
     there.


File: asdf.info,  Node: Search Algorithm,  Next: Caching Results,  Prev: Shell-friendly syntax for configuration,  Up: Controlling where ASDF searches for systems

8.8 Search Algorithm
====================

In case that isn’t clear, the semantics of the configuration is that
when searching for a system of a given name, directives are processed in
order.

   When looking in a directory, if the system is found, the search
succeeds, otherwise it continues.

   When looking in a tree, if one system is found, the search succeeds.
If multiple systems are found, the consequences are unspecified: the
search may succeed with any of the found systems, or an error may be
raised.  ASDF 3.2.1 or later returns the pathname whose normalized
directory component has the shortest length (as a list), and breaks ties
by choosing the system with the smallest ‘unix-namestring’ when compared
with ‘string<’.  Earlier versions of ASDF return ASDF return the first
system found, which is implementation-dependent, and may or may not be
the pathname with the smallest ‘unix-namestring’ when compared with
‘string<’.  XCVB raises an error.  If none is found, the search
continues.

   Exclude statements specify patterns of subdirectories the systems
from which to ignore.  Typically you don’t want to use copies of files
kept by such version control systems as Darcs.  Exclude statements are
not propagated to further included or inherited configuration files or
expressions; instead the defaults are reset around every configuration
statement to the default defaults from
‘asdf::*default-source-registry-exclusions*’.

   Include statements cause the search to recurse with the path
specifications from the file specified.

   An inherit-configuration statement cause the search to recurse with
the path specifications from the next configuration (*note
Configurations:: above).


File: asdf.info,  Node: Caching Results,  Next: Configuration API,  Prev: Search Algorithm,  Up: Controlling where ASDF searches for systems

8.9 Caching Results
===================

The implementation is allowed to either eagerly compute the information
from the configurations and file system, or to lazily re-compute it
every time, or to cache any part of it as it goes.  In practice, the
recommended ‘source-registry’ eagerly collects and caches results and
you need to explicitly flush the cache for change to be taken into
account, whereas the old-style ‘*central-registry*’ mechanism queries
the filesystem every time.

   To explicitly flush any information cached by the system after a
change was made in the filesystem, *Note Configuration API::, and e.g.
call ‘asdf:clear-source-registry’.

   Starting with ASDF 3.1.4, you can also explicitly build a persistent
cache of the ‘.asd’ files found under a tree: when recursing into a
directory declared by ‘:tree’ and its transitive subdirectories, if a
file ‘.cl-source-registry.cache’ exists containing a form that is a list
starting with ‘:source-registry-cache’ followed by a list of strings, as
in ‘(:source-registry-cache _"foo/bar.asd" "path/to/more.asd" ..._)’,
then the strings are assumed to be ‘unix-namestring’s designating the
available asd files under that tree, and the recursion otherwise stops.
The list can also be empty, allowing to stop a costly recursion in a
huge directory tree.

   To update such a cache after you install, update or remove source
repositories, you can run a script distributed with ASDF:
‘tools/cl-source-registry-cache.lisp _/path/to/directory_’.  To wholly
invalidate the cache, you can delete the file
‘.cl-source-registry.cache’ in that directory.  In either case, for an
existing Lisp process to see this change, it needs to clear its own
cache with e.g.  ‘(asdf:clear-source-registry)’.

   Developers may safely create a cache in their development tree, and
we recommend they do it at the top of their source tree if it contains
more than a small number of files and directories; they only need update
it when they create, remove or move ‘.asd’ files.  Software distribution
managers may also safely create such a cache, but they must be careful
to update it every time they install, update or remove a software source
repository or installation package.  Finally, advanced developers who
juggle with a lot of code in their ‘source-registry’ may manually manage
such a cache, to allow for faster startup of Lisp programs.

   This persistence cache can help you reduce startup latency.  For
instance, on one machine with hundreds of source repositories, such a
cache shaves half a second at the startup of every ‘#!/usr/bin/cl’
script using SBCL, more on other implementations; this makes a notable
difference as to their subjective interactivity and usability.  The
speedup will only happen if the implementation-provided ASDF is recent
enough (3.1.3.7 or later); it is not enough for a recent ASDF upgrade to
be present, since the upgrade will itself be found but after the old
version has scanned the directories without heeding such a cache.  To
upgrade the implementation-provided ASDF, *note Replacing your
implementation's ASDF::.


File: asdf.info,  Node: Configuration API,  Next: Introspection,  Prev: Caching Results,  Up: Controlling where ASDF searches for systems

8.10 Configuration API
======================

The specified functions are exported from your build system’s package.
Thus for ASDF the corresponding functions are in package ASDF, and for
XCVB the corresponding functions are in package XCVB.

 -- Function: initialize-source-registry &optional PARAMETER
     will read the configuration and initialize all internal variables.
     You may extend or override configuration from the environment and
     configuration files with the given PARAMETER, which can be ‘nil’
     (no configuration override), or a SEXP (in the SEXP DSL), a string
     (as in the string DSL), a pathname (of a file or directory with
     configuration), or a symbol (fbound to function that when called
     returns one of the above).

 -- Function: clear-source-registry
     undoes any source registry configuration and clears any cache for
     the search algorithm.  You might want to call this function (or
     better, ‘clear-configuration’) before you dump an image that would
     be resumed with a different configuration, and return an empty
     configuration.  Note that this does not include clearing
     information about systems defined in the current image, only about
     where to look for systems not yet defined.

 -- Function: ensure-source-registry &optional PARAMETER
     checks whether a source registry has been initialized.  If not,
     initialize it with the given PARAMETER.

   Every time you use ASDF’s ‘find-system’, or anything that uses it
(such as ‘operate’, ‘load-system’, etc.), ‘ensure-source-registry’ is
called with parameter ‘nil’, which the first time around causes your
configuration to be read.  If you change a configuration file, you need
to explicitly ‘initialize-source-registry’ again, or maybe simply to
‘clear-source-registry’ (or ‘clear-configuration’) which will cause the
initialization to happen next time around.


File: asdf.info,  Node: Introspection,  Next: Status,  Prev: Configuration API,  Up: Controlling where ASDF searches for systems

8.11 Introspection
==================

* Menu:

* *source-registry-parameter* variable::
* Information about system dependencies::


File: asdf.info,  Node: *source-registry-parameter* variable,  Next: Information about system dependencies,  Prev: Introspection,  Up: Introspection

8.11.1 *source-registry-parameter* variable
-------------------------------------------

We have made available the variable ‘*source-registry-parameter*’ that
can be used by code that wishes to introspect about the (past)
configuration of ASDF’s source registry.  *This variable should never be
set!*  It will be set as a side-effect of calling
‘initialize-source-registry’; user code should treat it as read-only.


File: asdf.info,  Node: Information about system dependencies,  Prev: *source-registry-parameter* variable,  Up: Introspection

8.11.2 Information about system dependencies
--------------------------------------------

ASDF makes available three functions to read system interdependencies.
These are intended to aid programmers who wish to perform dependency
analyses.

 -- Function: system-defsystem-depends-on system

 -- Function: system-depends-on system

 -- Function: system-weakly-depends-on system
     Returns a list of names of systems that are weakly depended on by
     SYSTEM.  Weakly depended on systems are optionally loaded only if
     ASDF can find them; failure to find such systems does _not_ cause
     an error in loading.

     Note that the return value for ‘system-weakly-depends-on’ is
     simpler than the return values of the other two system dependency
     introspection functions.


File: asdf.info,  Node: Status,  Next: Rejected ideas,  Prev: Introspection,  Up: Controlling where ASDF searches for systems

8.12 Status
===========

This mechanism is vastly successful, and we have declared that
‘asdf:*central-registry*’ is not recommended anymore, though we will
continue to support it.  All hooks into implementation-specific search
mechanisms have been integrated in the ‘wrapping-source-registry’ that
everyone uses implicitly.


File: asdf.info,  Node: Rejected ideas,  Next: TODO,  Prev: Status,  Up: Controlling where ASDF searches for systems

8.13 Rejected ideas
===================

Alternatives I (FRR) considered and rejected while developing ASDF 2
included:

  1. Keep ‘asdf:*central-registry*’ as the master with its current
     semantics, and somehow the configuration parser expands the new
     configuration language into a expanded series of directories of
     subdirectories to lookup, pre-recursing through specified
     hierarchies.  This is kludgy, and leaves little space of future
     cleanups and extensions.

  2. Keep ‘asdf:*central-registry*’ as the master but extend its
     semantics in completely new ways, so that new kinds of entries may
     be implemented as a recursive search, etc.  This seems somewhat
     backwards.

  3. Completely remove ‘asdf:*central-registry*’ and break backwards
     compatibility.  Hopefully this will happen in a few years after
     everyone migrate to a better ASDF and/or to XCVB, but it would be
     very bad to do it now.

  4. Replace ‘asdf:*central-registry*’ by a symbol-macro with
     appropriate magic when you dereference it or setf it.  Only the new
     variable with new semantics is handled by the new search procedure.
     Complex and still introduces subtle semantic issues.

   I’ve been suggested the below features, but have rejected them, for
the sake of keeping ASDF no more complex than strictly necessary.

   • More syntactic sugar: synonyms for the configuration directives,
     such as ‘(:add-directory X)’ for ‘(:directory X)’, or
     ‘(:add-directory-hierarchy X)’ or ‘(:add-directory X :recurse t)’
     for ‘(:tree X)’.

   • The possibility to register individual files instead of
     directories.

   • Integrate Xach Beane’s tilde expander into the parser, or something
     similar that is shell-friendly or shell-compatible.  I’d rather
     keep ASDF minimal.  But maybe this precisely keeps it minimal by
     removing the need for evaluated entries that ASDF has?  i.e.  uses
     of ‘USER-HOMEDIR-PATHNAME’ and ‘$SBCL_HOME’ Hopefully, these are
     already superseded by the ‘:default-registry’

   • Using the shell-unfriendly syntax ‘/**’ instead of TEXINPUTS-like
     ‘//’ to specify recursion down a filesystem tree in the environment
     variable.  It isn’t that Lisp friendly either.


File: asdf.info,  Node: TODO,  Next: Credits for the source-registry,  Prev: Rejected ideas,  Up: Controlling where ASDF searches for systems

8.14 TODO
=========

   • Add examples


File: asdf.info,  Node: Credits for the source-registry,  Prev: TODO,  Up: Controlling where ASDF searches for systems

8.15 Credits for the source-registry
====================================

Thanks a lot to Stelian Ionescu for the initial idea.

   Thanks to Rommel Martinez for the initial implementation attempt.

   All bad design ideas and implementation bugs are mine, not theirs.
But so are good design ideas and elegant implementation tricks.

   — Francois-Rene Rideau <fare@tunes.org>, Mon, 22 Feb 2010 00:07:33
-0500


File: asdf.info,  Node: Controlling where ASDF saves compiled files,  Next: Error handling,  Prev: Controlling where ASDF searches for systems,  Up: Top

9 Controlling where ASDF saves compiled files
*********************************************

Each Common Lisp implementation has its own format for compiled files or
fasls.(1)  If you use multiple implementations (or multiple versions of
the same implementation), you’ll soon find your source directories
littered with various ‘fasl’s, ‘dfsl’s, ‘cfsl’s and so on.  Worse yet,
multiple implementations use the same file extension and some
implementations maintain the same file extension while changing formats
from version to version (or platform to platform).  This can lead to
many errors and much confusion as you switch from one implementation to
the next.  Finally, this requires write access to the source directory,
and therefore precludes sharing of a same source code directory between
multiple users.

   Since ASDF 2, ASDF includes the ‘asdf-output-translations’ facility
to mitigate the problem.

* Menu:

* Output Configurations::
* Output Backward Compatibility::
* Output Configuration DSL::
* Output Configuration Directories::
* Output Shell-friendly syntax for configuration::
* Semantics of Output Translations::
* Output Caching Results::
* Output location API::
* Credits for output translations::

   ---------- Footnotes ----------

   (1) “FASL” is short for “FASt Loading.”


File: asdf.info,  Node: Output Configurations,  Next: Output Backward Compatibility,  Prev: Controlling where ASDF saves compiled files,  Up: Controlling where ASDF saves compiled files

9.1 Configurations
==================

Configurations specify mappings from input locations to output
locations.  Once again we rely on the XDG base directory specification
for configuration.  *Note XDG base directory: Controlling where ASDF
searches for systems.

  1. Some hardcoded wrapping output translations configuration may be
     used.  This allows special output translations (or usually,
     invariant directories) to be specified corresponding to the similar
     special entries in the source registry.

  2. An application may explicitly initialize the output-translations
     configuration using the Configuration API in which case this takes
     precedence.  (*note Configuration API: Controlling where ASDF saves
     compiled files.)  It may itself compute this configuration from the
     command-line, from a script, from its own configuration file, etc.

  3. The source registry will be configured from the environment
     variable ‘ASDF_OUTPUT_TRANSLATIONS’ if it exists.

  4. The source registry will be configured from user configuration file
     ‘$XDG_CONFIG_DIRS/common-lisp/asdf-output-translations.conf’ (which
     defaults to ‘~/.config/common-lisp/asdf-output-translations.conf’)
     if it exists.

  5. The source registry will be configured from user configuration
     directory
     ‘$XDG_CONFIG_DIRS/common-lisp/asdf-output-translations.conf.d/’
     (which defaults to
     ‘~/.config/common-lisp/asdf-output-translations.conf.d/’) if it
     exists.

  6. The source registry will be configured from system configuration
     file ‘/etc/common-lisp/asdf-output-translations.conf’ if it exists.

  7. The source registry will be configured from system configuration
     directory ‘/etc/common-lisp/asdf-output-translations.conf.d/’ if it
     exists.

   Each of these configurations is specified as a SEXP in a trivial
domain-specific language (*note Configuration DSL::).  Additionally, a
more shell-friendly syntax is available for the environment variable
(*note Shell-friendly syntax for configuration::).

   When processing an entry in the above list of configuration methods,
ASDF will stop unless that entry explicitly or implicitly specifies that
it includes its inherited configuration.

   Note that by default, a per-user cache is used for output files.
This allows the seamless use of shared installations of software between
several users, and takes files out of the way of the developers when
they browse source code, at the expense of taking a small toll when
developers have to clean up output files and find they need to get
familiar with output-translations first.(1)

   ---------- Footnotes ----------

   (1) A ‘CLEAN-OP’ would be a partial solution to this problem.


File: asdf.info,  Node: Output Backward Compatibility,  Next: Output Configuration DSL,  Prev: Output Configurations,  Up: Controlling where ASDF saves compiled files

9.2 Backward Compatibility
==========================

We purposely do _not_ provide backward compatibility with earlier
versions of ‘ASDF-Binary-Locations’ (8 Sept 2009),
‘common-lisp-controller’ (7.0) or ‘cl-launch’ (2.35), each of which had
similar general capabilities.  The APIs of these programs were not
designed for easy user configuration through configuration files.
Recent versions of ‘common-lisp-controller’ (7.2) and ‘cl-launch’
(3.000) use the new ‘asdf-output-translations’ API as defined below.
‘ASDF-Binary-Locations’ is fully superseded and not to be used anymore.

   This incompatibility shouldn’t inconvenience many people.  Indeed,
few people use and customize these packages; these few people are
experts who can trivially adapt to the new configuration.  Most people
are not experts, could not properly configure these features (except
inasmuch as the default configuration of ‘common-lisp-controller’ and/or
‘cl-launch’ might have been doing the right thing for some users), and
yet will experience software that “just works”, as configured by the
system distributor, or by default.

   Nevertheless, if you are a fan of ‘ASDF-Binary-Locations’, we provide
a limited emulation mode:

 -- Function: enable-asdf-binary-locations-compatibility &key
          centralize-lisp-binaries default-toplevel-directory
          include-per-user-information map-all-source-files
          source-to-target-mappings
     This function will initialize the new ‘asdf-output-translations’
     facility in a way that emulates the behaviour of the old
     ‘ASDF-Binary-Locations’ facility.  Where you would previously set
     global variables *CENTRALIZE-LISP-BINARIES*,
     *DEFAULT-TOPLEVEL-DIRECTORY*, *INCLUDE-PER-USER-INFORMATION*,
     *MAP-ALL-SOURCE-FILES* or *SOURCE-TO-TARGET-MAPPINGS* you will now
     have to pass the same values as keyword arguments to this function.
     Note however that as an extension the ‘:source-to-target-mappings’
     keyword argument will accept any valid pathname designator for
     ‘asdf-output-translations’ instead of just strings and pathnames.

   If you insist, you can also keep using the old
‘ASDF-Binary-Locations’ (the one available as an extension to load of
top of ASDF, not the one built into a few old versions of ASDF), but
first you must disable ‘asdf-output-translations’ with
‘(asdf:disable-output-translations)’, or you might experience
“interesting” issues.

   Also, note that output translation is enabled by default.  To disable
it, use ‘(asdf:disable-output-translations)’.


File: asdf.info,  Node: Output Configuration DSL,  Next: Output Configuration Directories,  Prev: Output Backward Compatibility,  Up: Controlling where ASDF saves compiled files

9.3 Configuration DSL
=====================

Here is the grammar of the SEXP DSL for ‘asdf-output-translations’
configuration:

;; A configuration is single SEXP starting with keyword :output-translations
;; followed by a list of directives.
CONFIGURATION := (:output-translations DIRECTIVE ...)

;; A directive is one of the following:
DIRECTIVE :=
    ;; INHERITANCE DIRECTIVE:
    ;; Your configuration expression MUST contain
    ;; exactly one of either of these:
    :inherit-configuration |
      ;; splices inherited configuration (often specified last)
    :ignore-inherited-configuration |
      ;; drop inherited configuration (specified anywhere)

    ;; forward compatibility directive (since ASDF 2.011.4), useful when
    ;; you want to use new configuration features but have to bootstrap a
    ;; the newer required ASDF from an older release that doesn't have
    ;; said features:
    :ignore-invalid-entries |

    ;; include a configuration file or directory
    (:include PATHNAME-DESIGNATOR) |

    ;; enable global cache in ~/.common-lisp/cache/sbcl-1.0.45-linux-amd64/
    ;; or something.
    :enable-user-cache |
    ;; Disable global cache. Map / to /
    :disable-cache |

    ;; add a single directory to be scanned (no recursion)
    (DIRECTORY-DESIGNATOR DIRECTORY-DESIGNATOR)

    ;; use a function to return the translation of a directory designator
    (DIRECTORY-DESIGNATOR (:function TRANSLATION-FUNCTION))

DIRECTORY-DESIGNATOR :=
    NIL | ; As source: skip this entry. As destination: same as source
    T | ; as source matches anything, as destination
        ; maps pathname to itself.
    ABSOLUTE-COMPONENT-DESIGNATOR ; same as in the source-registry language

TRANSLATION-FUNCTION :=
    SYMBOL | ;; symbol naming a function that takes two arguments:
             ;; the pathname to be translated and the matching
             ;; DIRECTORY-DESIGNATOR
    LAMBDA   ;; A form which evaluates to a function taking two arguments:
             ;; the pathname to be translated and the matching
             ;; DIRECTORY-DESIGNATOR


   Relative components better be either relative or subdirectories of
the path before them, or bust.

   The last component, if not a pathname, is notionally completed by
‘/**/*.*’.  You can specify more fine-grained patterns by using a
pathname object as the last component e.g.
‘#p"some/path/**/foo*/bar-*.fasl"’

   You may use ‘#+features’ to customize the configuration file.

   The second designator of a mapping may be ‘nil’, indicating that
files are not mapped to anything but themselves (same as if the second
designator was the same as the first).

   When the first designator is ‘t’, the mapping always matches.  When
the first designator starts with ‘:root’, the mapping matches any host
and device.  In either of these cases, if the second designator isn’t
‘t’ and doesn’t start with ‘:root’, then strings indicating the host and
pathname are somehow copied in the beginning of the directory component
of the source pathname before it is translated.

   When the second designator is ‘t’, the mapping is the identity.  When
the second designator starts with ‘:root’, the mapping preserves the
host and device of the original pathname.  Notably, this allows you to
map files to a subdirectory of the whichever directory the file is in.
Though the syntax is not quite as easy to use as we’d like, you can have
an (source destination) mapping entry such as follows in your
configuration file, or you may use
‘enable-asdf-binary-locations-compatibility’ with
‘:centralize-lisp-binaries nil’ which will do the same thing internally
for you:
     #.(let ((wild-subdir
               (make-pathname :directory '(:relative :wild-inferiors)))
             (wild-file
               (make-pathname :name :wild :version :wild :type :wild)))
        `((:root ,wild-subdir ,wild-file)
          (:root ,wild-subdir :implementation ,wild-file)))
   Starting with ASDF 2.011.4, you can use the simpler: ‘`(:root (:root
:**/ :implementation :*.*.*))’

   ‘:include’ statements cause the search to recurse with the path
specifications from the file specified.

   If the ‘translate-pathname’ mechanism cannot achieve a desired
translation, the user may provide a function which provides the required
algorithm.  Such a translation function is specified by supplying a list
as the second ‘directory-designator’ the first element of which is the
keyword ‘:function’, and the second element of which is either a symbol
which designates a function or a lambda expression.  The function
designated by the second argument must take two arguments, the first
being the pathname of the source file, the second being the wildcard
that was matched.  When invoked, the function should return the
translated pathname.

   An ‘:inherit-configuration’ statement causes the search to recurse
with the path specifications from the next configuration in the bulleted
list.  *Note Configurations: Controlling where ASDF saves compiled
files, above.

   • ‘:enable-user-cache’ is the same as ‘(t :user-cache)’.
   • ‘:disable-cache’ is the same as ‘(t t)’.
   • ‘:user-cache’ uses the contents of variable ‘asdf::*user-cache*’
     which by default is the same as using ‘(:home ".cache"
     "common-lisp" :implementation)’.


File: asdf.info,  Node: Output Configuration Directories,  Next: Output Shell-friendly syntax for configuration,  Prev: Output Configuration DSL,  Up: Controlling where ASDF saves compiled files

9.4 Configuration Directories
=============================

Configuration directories consist of files, each of which contains a
list of directives without any enclosing ‘(:output-translations ...)’
form.  The files will be sorted by namestring as if by ‘string<’ and the
lists of directives of these files with be concatenated in order.  An
implicit ‘:inherit-configuration’ will be included at the _end_ of the
list.

   System-wide or per-user Common Lisp software distributions such as
Debian packages or some future version of ‘clbuild’ may then include
files such as
‘/etc/common-lisp/asdf-output-translations.conf.d/10-foo.conf’ or
‘~/.config/common-lisp/asdf-output-translations.conf.d/10-foo.conf’ to
easily and modularly register configuration information about software
being distributed.

   The convention is that, for sorting purposes, the names of files in
such a directory begin with two digits that determine the order in which
these entries will be read.  Also, the type of these files must be
‘.conf’, which not only simplifies the implementation by allowing for
more portable techniques in finding those files, but also makes it
trivial to disable a file, by renaming it to a different file type.

   Directories may be included by specifying a directory pathname or
namestring in an ‘:include’ directive, e.g.:

	(:include "/foo/bar/")


File: asdf.info,  Node: Output Shell-friendly syntax for configuration,  Next: Semantics of Output Translations,  Prev: Output Configuration Directories,  Up: Controlling where ASDF saves compiled files

9.5 Shell-friendly syntax for configuration
===========================================

When processing the environment variable ‘ASDF_OUTPUT_TRANSLATIONS’:
   • ASDF will skip to the next configuration if it’s an empty string.
   • ASDF will ‘READ’ the string as an SEXP in the DSL, if it begins
     with a parenthesis ‘(’.
   • Otherwise ASDF will interpret the value as a list of directories
     (see below).

   In the directory list format, directories should come in pairs, each
pair indicating a mapping directive.  Entries are separated by a ‘:’
(colon) on Unix platforms (including Mac and cygwin), and by a ‘;’
(semicolon) on other platforms (mainly, Windows).

   The magic empty entry, if it comes in what would otherwise be the
first entry in a pair, indicates the splicing of inherited
configuration; the next entry (if any) then starts a new pair.  If the
second entry in a pair is empty, it indicates that the directory in the
first entry is to be left untranslated (which has the same effect as if
the directory had been repeated).

   For example, ‘"/foo:/bar::/baz:"’ means: specify that outputs for
things under directory ‘/foo/’ are translated to be under ‘/bar/’; then
include the inherited configuration; then specify that outputs for
things under directory ‘/baz/’ are not translated.


File: asdf.info,  Node: Semantics of Output Translations,  Next: Output Caching Results,  Prev: Output Shell-friendly syntax for configuration,  Up: Controlling where ASDF saves compiled files

9.6 Semantics of Output Translations
====================================

From the specified configuration, a list of mappings is extracted in a
straightforward way: mappings are collected in order, recursing through
included or inherited configuration as specified.  To this list is
prepended some implementation-specific mappings, and is appended a
global default.

   The list is then compiled to a mapping table as follows: for each
entry, in order, resolve the first designated directory into an actual
directory pathname for source locations.  If no mapping was specified
yet for that location, resolve the second designated directory to an
output location directory add a mapping to the table mapping the source
location to the output location, and add another mapping from the output
location to itself (unless a mapping already exists for the output
location).

   Based on the table, a mapping function is defined, mapping source
pathnames to output pathnames: given a source pathname, locate the
longest matching prefix in the source column of the mapping table.
Replace that prefix by the corresponding output column in the same row
of the table, and return the result.  If no match is found, return the
source pathname.  (A global default mapping the filesystem root to
itself may ensure that there will always be a match, with same
fall-through semantics).


File: asdf.info,  Node: Output Caching Results,  Next: Output location API,  Prev: Semantics of Output Translations,  Up: Controlling where ASDF saves compiled files

9.7 Caching Results
===================

The implementation is allowed to either eagerly compute the information
from the configurations and file system, or to lazily re-compute it
every time, or to cache any part of it as it goes.  To explicitly flush
any information cached by the system, use the API below.


File: asdf.info,  Node: Output location API,  Next: Credits for output translations,  Prev: Output Caching Results,  Up: Controlling where ASDF saves compiled files

9.8 Output location API
=======================

The specified functions are exported from package ASDF.

 -- Function: initialize-output-translations &optional PARAMETER
     will read the configuration and initialize all internal variables.
     You may extend or override configuration from the environment and
     configuration files with the given PARAMETER, which can be ‘nil’
     (no configuration override), or a SEXP (in the SEXP DSL), a string
     (as in the string DSL), a pathname (of a file or directory with
     configuration), or a symbol (fbound to function that when called
     returns one of the above).

 -- Function: disable-output-translations
     will initialize output translations in a way that maps every
     pathname to itself, effectively disabling the output translation
     facility.

 -- Function: clear-output-translations
     undoes any output translation configuration and clears any cache
     for the mapping algorithm.  You might want to call this function
     (or better, ‘clear-configuration’) before you dump an image that
     would be resumed with a different configuration, and return an
     empty configuration.  Note that this does not include clearing
     information about systems defined in the current image, only about
     where to look for systems not yet defined.

 -- Function: ensure-output-translations &optional PARAMETER
     checks whether output translations have been initialized.  If not,
     initialize them with the given PARAMETER.  This function will be
     called before any attempt to operate on a system.

 -- Function: apply-output-translations PATHNAME
     Applies the configured output location translations to PATHNAME
     (calls ‘ensure-output-translations’ for the translations).

   Every time you use ASDF’s ‘output-files’, or anything that uses it
(that may compile, such as ‘operate’, ‘perform’, etc.),
‘ensure-output-translations’ is called with parameter ‘nil’, which the
first time around causes your configuration to be read.  If you change a
configuration file, you need to explicitly
‘initialize-output-translations’ again, or maybe
‘clear-output-translations’ (or ‘clear-configuration’), which will cause
the initialization to happen next time around.


File: asdf.info,  Node: Credits for output translations,  Prev: Output location API,  Up: Controlling where ASDF saves compiled files

9.9 Credits for output translations
===================================

Thanks a lot to Peter van Eynde for ‘Common Lisp Controller’ and to
Bjorn Lindberg and Gary King for ‘ASDF-Binary-Locations’.

   All bad design ideas and implementation bugs are to mine, not theirs.
But so are good design ideas and elegant implementation tricks.

   — Francois-Rene Rideau <fare@tunes.org>


File: asdf.info,  Node: Error handling,  Next: Miscellaneous additional functionality,  Prev: Controlling where ASDF saves compiled files,  Up: Top

10 Error handling
*****************

10.1 ASDF errors
================

If ASDF detects an incorrect system definition, it will signal a
generalised instance of ‘system-definition-error’.

   Operations may go wrong (for example when source files contain
errors).  These are signalled using generalised instances of
‘operation-error’.

10.2 Compilation error and warning handling
===========================================

ASDF checks for warnings and errors when a file is compiled.  The
variables *COMPILE-FILE-WARNINGS-BEHAVIOUR* and
*COMPILE-FILE-FAILURE-BEHAVIOUR* control the handling of any such
events.  The valid values for these variables are ‘:error’, ‘:warn’, and
‘:ignore’.


File: asdf.info,  Node: Miscellaneous additional functionality,  Next: Getting the latest version,  Prev: Error handling,  Up: Top

11 Miscellaneous additional functionality
*****************************************

ASDF includes several additional features that are generally useful for
system definition and development.

* Menu:

* Controlling file compilation::
* Controlling source file character encoding::
* Miscellaneous Functions::
* Some Utility Functions::


File: asdf.info,  Node: Controlling file compilation,  Next: Controlling source file character encoding,  Prev: Miscellaneous additional functionality,  Up: Miscellaneous additional functionality

11.1 Controlling file compilation
=================================

When declaring a component (system, module, file), you can specify a
keyword argument ‘:around-compile function’.  If left unspecified (and
therefore unbound), the value will be inherited from the parent
component if any, or with a default of ‘nil’ if no value is specified in
any transitive parent.

   The argument must be either ‘nil’, an fbound symbol, a
lambda-expression (e.g.  ‘(lambda (thunk) ...(funcall thunk ...) ...)’)
a function object (e.g.  using ‘#.#'’ but that’s discouraged because it
prevents the introspection done by e.g.  asdf-dependency-grovel), or a
string that when ‘read’ yields a symbol or a lambda-expression.  ‘nil’
means the normal compile-file function will be called.  A non-nil value
designates a function of one argument that will be called with a
function that will invoke ‘compile-file*’ with various arguments; the
around-compile hook may supply additional keyword arguments to pass to
that call to ‘compile-file*’.

   One notable argument that is heeded by ‘compile-file*’ is
‘:compile-check’, a function called when the compilation was otherwise a
success, with the same arguments as ‘compile-file’; the function shall
return true if the compilation and its resulting compiled file respected
all system-specific invariants, and false (‘nil’) if it broke any of
those invariants; it may issue warnings or errors before it returns
‘nil’.  (NB: The ability to pass such extra flags is only available
starting with ASDF 2.22.3.)  This feature is notably exercised by
asdf-finalizers.

   By using a string, you may reference a function, symbol and/or
package that will only be created later during the build, but isn’t yet
present at the time the defsystem form is evaluated.  However, if your
entire system is using such a hook, you may have to explicitly override
the hook with ‘nil’ for all the modules and files that are compiled
before the hook is defined.

   Using this hook, you may achieve such effects as: locally renaming
packages, binding *READTABLES* and other syntax-controlling variables,
handling warnings and other conditions, proclaiming consistent
optimization settings, saving code coverage information, maintaining
meta-data about compilation timings, setting gensym counters and PRNG
seeds and other sources of non-determinism, overriding the
source-location and/or timestamping systems, checking that some
compile-time side-effects were properly balanced, etc.

   Note that there is no around-load hook.  This is on purpose.  Some
implementations such as ECL, GCL or MKCL link object files, which allows
for no such hook.  Other implementations allow for concatenating FASL
files, which doesn’t allow for such a hook either.  We aim to discourage
something that’s not portable, and has some dubious impact on
performance and semantics even when it is possible.  Things you might
want to do with an around-load hook are better done around-compile,
though it may at times require some creativity (see e.g.  the
‘package-renaming’ system).


File: asdf.info,  Node: Controlling source file character encoding,  Next: Miscellaneous Functions,  Prev: Controlling file compilation,  Up: Miscellaneous additional functionality

11.2 Controlling source file character encoding
===============================================

Starting with ASDF 2.21, components accept a ‘:encoding’ option so
authors may specify which character encoding should be used to read and
evaluate their source code.  When left unspecified, the encoding is
inherited from the parent module or system; if no encoding is specified
at any point, or if ‘nil’ is explicitly specified, an extensible
protocol described below is followed, that ultimately defaults to
‘:utf-8’ since ASDF 3.

   The protocol to determine the encoding is to call the function
‘detect-encoding’, which itself, if provided a valid file, calls the
function specified by *ENCODING-DETECTION-HOOK*, or else defaults to the
*DEFAULT-ENCODING*.  The *ENCODING-DETECTION-HOOK* is by default bound
to function ‘always-default-encoding’, that always returns the contents
of *DEFAULT-ENCODING*.  *DEFAULT-ENCODING* is bound to ‘:utf-8’ by
default (before ASDF 3, the default was ‘:default’).

   Whichever encoding is returned must be a portable keyword, that will
be translated to an implementation-specific external-format designator
by function ‘encoding-external-format’, which itself simply calls the
function specified *ENCODING-EXTERNAL-FORMAT-HOOK*; that function by
default is ‘default-encoding-external-format’, that only recognizes
‘:utf-8’ and ‘:default’, and translates the former to the
implementation-dependent *UTF-8-EXTERNAL-FORMAT*, and the latter to
itself (that itself is portable but has an implementation-dependent
meaning).

   In other words, there now are plenty of extension hooks, but by
default ASDF enforces the previous _de facto_ standard behaviour of
using ‘:utf-8’, independently from whatever configuration the user may
be using.  Thus, system authors can now rely on ‘:utf-8’ being used
while compiling their files, even if the user is currently using
‘:koi8-r’ or ‘:euc-jp’ as their interactive encoding.  (Before ASDF 3,
there was no such guarantee, ‘:default’ was used, and only plain ASCII
was safe to include in source code.)

   Some legacy implementations only support 8-bit characters, and some
implementations provide 8-bit only variants.  On these implementations,
the *UTF-8-EXTERNAL-FORMAT* gracefully falls back to ‘:default’, and
Unicode characters will be read as multi-character mojibake.  To detect
such situations, UIOP will push the ‘:asdf-unicode’ feature on
implementations that support Unicode, and you can use
reader-conditionalization to protect any ‘:encoding _encoding_’
statement, as in ‘#+asdf-unicode :encoding #+asdf-unicode :utf-8’.  We
recommend that you avoid using unprotected ‘:encoding’ specifications
until after ASDF 2.21 or later becomes widespread.  As of May 2016, all
maintained implementations provide ASDF 3.1, so you may prudently start
using this and other features without such protection.

   While it offers plenty of hooks for extension, and one such extension
is available (see ‘asdf-encodings’ below), ASDF itself only recognizes
one encoding beside ‘:default’, and that is ‘:utf-8’, which is the _de
facto_ standard, already used by the vast majority of libraries that use
more than ASCII. On implementations that do not support unicode, the
feature ‘:asdf-unicode’ is absent, and the ‘:default’ external-format is
used to read even source files declared as ‘:utf-8’.  On these
implementations, non-ASCII characters intended to be read as one CL
character may thus end up being read as multiple CL characters.  In most
cases, this shouldn’t affect the software’s semantics: comments will be
skipped just the same, strings with be read and printed with slightly
different lengths, symbol names will be accordingly longer, but none of
it should matter.  But a few systems that actually depend on unicode
characters may fail to work properly, or may work in a subtly different
way.  See for instance ‘lambda-reader’.

   We invite you to embrace UTF-8 as the encoding for non-ASCII
characters starting today, even without any explicit specification in
your ‘.asd’ files.  Indeed, on some implementations and configurations,
UTF-8 is already the ‘:default’, and loading your code may cause errors
if it is encoded in anything but UTF-8.  Therefore, even with the legacy
behaviour, non-UTF-8 is guaranteed to break for some users, whereas
UTF-8 is pretty much guaranteed not to break anywhere (provided you do
_not_ use a BOM), although it might be read incorrectly on some
implementations.  ‘:utf-8’ has been the default value of
‘*default-encoding*’ since ASDF 3.

   If you need non-standard character encodings for your source code,
use the extension system ‘asdf-encodings’, by specifying
‘:defsystem-depends-on ("asdf-encodings")’ in your ‘defsystem’.  This
extension system will register support for more encodings using the
‘*encoding-external-format-hook*’ facility, so you can explicitly
specify ‘:encoding :latin1’ in your ‘.asd’ file.  Using the
‘*encoding-detection-hook*’ it will also eventually implement some
autodetection of a file’s encoding from an emacs-style ‘-*- mode: lisp ;
coding: latin1 -*-’ declaration, or otherwise based on an analysis of
octet patterns in the file.  At this point, ‘asdf-encoding’ only
supports the encodings that are supported as part of your
implementation.  Since the list varies depending on implementations, we
still recommend you use ‘:utf-8’ everywhere, which is the most portable
(next to it is ‘:latin1’).

   Recent versions of Quicklisp include ‘asdf-encodings’; if you’re not
using it, you may get this extension using git: ‘git clone
https://gitlab.common-lisp.net/asdf/asdf-encodings.git’ or ‘git clone
git@gitlab.common-lisp.net:asdf/asdf-encodings.git’.  You can also
browse the repository on
<https://gitlab.common-lisp.net/asdf/asdf-encodings>.

   When you use ‘asdf-encodings’, any ‘.asd’ file loaded will use the
autodetection algorithm to determine its encoding.  If you depend on
this detection happening, you should explicitly load ‘asdf-encodings’
early in your build.  Note that ‘:defsystem-depends-on’ cannot be used
here: by the time the ‘:defsystem-depends-on’ is loaded, the enclosing
‘defsystem’ form has already been read.

   In practice, this means that the ‘*default-encoding*’ is usually used
for ‘.asd’ files.  Currently, this defaults to ‘:utf-8’, and you should
be safe using Unicode characters in those files.  This might matter, for
instance, in meta-data about author’s names.  Otherwise, the main data
in these files is component (path)names, and we don’t recommend using
non-ASCII characters for these, for the result probably isn’t very
portable.


File: asdf.info,  Node: Miscellaneous Functions,  Next: Some Utility Functions,  Prev: Controlling source file character encoding,  Up: Miscellaneous additional functionality

11.3 Miscellaneous Functions
============================

These functions are exported by ASDF for your convenience.

 -- Function: system-relative-pathname system name &key type

     It’s often handy to locate a file relative to some system.  The
     ‘system-relative-pathname’ function meets this need.

     It takes two mandatory arguments SYSTEM and NAME and a keyword
     argument TYPE: SYSTEM is name of a system, whereas NAME and
     optionally TYPE specify a relative pathname, interpreted like a
     component pathname specifier by ‘coerce-pathname’.  *Note Pathname
     specifiers::.

     It returns a pathname built from the location of the system’s
     source directory and the relative pathname.  For example:

          > (asdf:system-relative-pathname 'cl-ppcre "regex.data")
          #P"/repository/other/cl-ppcre/regex.data"

 -- Function: system-source-directory system-designator

     ASDF does not provide a turnkey solution for locating data (or
     other miscellaneous) files that are distributed together with the
     source code of a system.  Programmers can use
     ‘system-source-directory’ to find such files.  Returns a pathname
     object.  The SYSTEM-DESIGNATOR may be a string, symbol, or ASDF
     system object.

 -- Function: clear-system system-designator

     It is sometimes useful to force recompilation of a previously
     loaded system.  For these cases, ‘(asdf:clear-system :foo)’ will
     remove the system from the table of currently loaded systems: the
     next time the system ‘foo’ or one that depends on it is re-loaded,
     ‘foo’ will be loaded again.(1)

     Note that this does not and cannot undo the previous loading of the
     system.  Common Lisp has no provision for such an operation, and
     its reliance on irreversible side-effects to global data structures
     makes such a thing impossible in the general case.  If the software
     being re-loaded is not conceived with hot upgrade in mind,
     re-loading may cause many errors, warnings or subtle silent
     problems, as packages, generic function signatures, structures,
     types, macros, constants, etc.  are being redefined incompatibly.
     It is up to the user to make sure that reloading is possible and
     has the desired effect.  In some cases, extreme measures such as
     recursively deleting packages, unregistering symbols, defining
     methods on ‘update-instance-for-redefined-class’ and much more are
     necessary for reloading to happen smoothly.  ASDF itself goes to
     extensive effort to make a hot upgrade possible with respect to its
     own code.  If you want, you can reuse some of its utilities such as
     ‘uiop:define-package’ and ‘uiop:with-upgradability’, and get
     inspiration (or disinspiration) from what it does in ‘header.lisp’
     and ‘upgrade.lisp’.

 -- Function: register-preloaded-system name &rest keys &key version
          &allow-other-keys
     A system with name NAME, created by ‘make-instance’ with extra keys
     KEYS (e.g.  ‘:version’), is registered as _preloaded_.  If VERSION
     is ‘t’ (default), then the version is copied from the defined
     system of the same name (if registered) or else is ‘nil’ (this
     automatic copy of version is only available starting since ASDF
     3.1.8).

     A preloaded system is considered as having already been loaded into
     the current image, and if at some point some other system
     ‘:depends-on’ it yet no source code is found, it is considered as
     already provided, and ASDF will not raise a ‘missing-component’
     error.

     This function is particularly useful if you distribute your code as
     fasls with either ‘compile-bundle-op’ or
     ‘monolithic-compile-bundle-op’, and want to register systems so
     that dependencies will work uniformly whether you’re using your
     software from source or from fasl.

     Note that if the system was already defined or loaded from source
     code, its build information will remain active until you call
     ‘clear-system’ on it, at which point a system without build
     information will be registered in its place.

 -- Function: register-immutable-system name &rest keys
     A system with name NAME is registered as preloaded, and
     additionally is marked as _immutable_: that is, attempts to compile
     or load it will be succeed without actually reading, creating or
     loading any file, as if the system was passed as a ‘force-not’
     argument to all calls to ‘plan’ or ‘operate’.  There will be no
     search for an updated ‘.asd’ file to override the loaded version,
     whether from the source-register or any other method.

     If a VERSION keyword argument is specified as ‘t’ or left
     unspecified, then the version is copied from the defined system of
     the same name (if registered) or else is ‘nil’.  This automatic
     copy of version is available starting since immutable systems have
     been available in ASDF 3.1.5.

     This function, available since ASDF 3.1.5, is particularly useful
     if you distribute a large body of code as a precompiled image, and
     want to allow users to extend the image with further extension
     systems, but without making thousands of filesystem requests
     looking for inexistent (or worse, out of date) source code for all
     the systems that came bundled with the image but aren’t distributed
     as source code to regular users.

 -- Function: run-shell-command control-string &rest args

     This function is obsolete and present only for the sake of
     backwards-compatibility: “If it’s not backwards, it’s not
     compatible”.  We _strongly_ discourage its use.  Its current
     behaviour is only well-defined on Unix platforms (which include
     MacOS X and cygwin).  On Windows, anything goes.  The following
     documentation is only for the purpose of your migrating away from
     it in a way that preserves semantics.

     Instead we recommend the use ‘run-program’, described in the next
     section, and available as part of ASDF since ASDF 3.

     ‘run-shell-command’ takes as arguments a format ‘control-string’
     and arguments to be passed to ‘format’ after this control-string to
     produce a string.  This string is a command that will be evaluated
     with a POSIX shell if possible; yet, on Windows, some
     implementations will use CMD.EXE, while others (like SBCL) will
     make an attempt at invoking a POSIX shell (and fail if it is not
     present).

   ---------- Footnotes ----------

   (1) Alternatively, you could touch ‘foo.asd’ or remove the
corresponding fasls from the output file cache.


File: asdf.info,  Node: Some Utility Functions,  Prev: Miscellaneous Functions,  Up: Miscellaneous additional functionality

11.4 Some Utility Functions
===========================

The below functions are not exported by ASDF itself, but by UIOP,
available since ASDF 3.  Some of them have precursors in ASDF 2, but we
recommend that for active developments, you should rely on the package
UIOP as included in ASDF 3.  UIOP provides many, many more utility
functions, and we recommend you read its ‘README.md’ and sources for
more information.

 -- Function: parse-unix-namestring name &key type defaults dot-dot
          ensure-directory &allow-other-keys
     Coerce NAME into a PATHNAME using standard Unix syntax.

     Unix syntax is used whether or not the underlying system is Unix;
     on non-Unix systems it is only usable for relative pathnames.  In
     order to manipulate relative pathnames portably, it is crucial to
     possess a portable pathname syntax independent of the underlying
     OS. This is what ‘parse-unix-namestring’ provides, and why we use
     it in ASDF.

     When given a ‘pathname’ object, just return it untouched.  When
     given ‘nil’, just return ‘nil’.  When given a non-null ‘symbol’,
     first downcase its name and treat it as a string.  When given a
     ‘string’, portably decompose it into a pathname as below.

     ‘#\/’ separates directory components.

     The last ‘#\/’-separated substring is interpreted as follows: 1- If
     TYPE is ‘:directory’ or ENSURE-DIRECTORY is true, the string is
     made the last directory component, and its ‘name’ and ‘type’ are
     ‘nil’.  if the string is empty, it’s the empty pathname with all
     slots ‘nil’.  2- If TYPE is ‘nil’, the substring is a
     file-namestring, and its ‘name’ and ‘type’ are separated by
     ‘split-name-type’.  3- If TYPE is a string, it is the given ‘type’,
     and the whole string is the ‘name’.

     Directory components with an empty name the name ‘.’ are removed.
     Any directory named ‘..’ is read as DOT-DOT, which must be one of
     ‘:back’ or ‘:up’ and defaults to ‘:back’.

     ‘host’, ‘device’ and ‘version’ components are taken from DEFAULTS,
     which itself defaults to ‘*nil-pathname*’.  ‘*nil-pathname*’ is
     also used if DEFAULTS is ‘nil’.  No host or device can be specified
     in the string itself, which makes it unsuitable for absolute
     pathnames outside Unix.

     For relative pathnames, these components (and hence the defaults)
     won’t matter if you use ‘merge-pathnames*’ but will matter if you
     use ‘merge-pathnames’, which is an important reason to always use
     ‘merge-pathnames*’.

     Arbitrary keys are accepted, and the parse result is passed to
     ‘ensure-pathname’ with those keys, removing TYPE, DEFAULTS and
     DOT-DOT.  When you’re manipulating pathnames that are supposed to
     make sense portably even though the OS may not be Unixish, we
     recommend you use ‘:want-relative t’ so that
     ‘parse-unix-namestring’ will throw an error if the pathname is
     absolute.

 -- Function: merge-pathnames* specified &optional defaults

     This function is a replacement for ‘merge-pathnames’ that uses the
     host and device from the DEFAULTS rather than the SPECIFIED
     pathname when the latter is a relative pathname.  This allows ASDF
     and its users to create and use relative pathnames without having
     to know beforehand what are the host and device of the absolute
     pathnames they are relative to.

 -- Function: subpathname pathname subpath &key type

     This function takes a PATHNAME and a SUBPATH and a TYPE.  If
     SUBPATH is already a ‘pathname’ object (not namestring), and is an
     absolute pathname at that, it is returned unchanged; otherwise,
     SUBPATH is turned into a relative pathname with given TYPE as per
     ‘parse-unix-namestring’ with ‘:want-relative t :type ’TYPE, then it
     is merged with the ‘pathname-directory-pathname’ of PATHNAME, as
     per ‘merge-pathnames*’.

     We strongly encourage the use of this function for portably
     resolving relative pathnames in your code base.

 -- Function: subpathname* pathname subpath &key type

     This function returns ‘nil’ if the base PATHNAME is ‘nil’,
     otherwise acts like ‘subpathname’.

 -- Function: run-program command &key ignore-error-status force-shell
          input output error-output if-input-does-not-exist
          if-output-exists if-error-output-exists element-type
          external-format &allow-other-keys

     ‘run-program’ takes a COMMAND argument that is either a list of a
     program name or path and its arguments, or a string to be executed
     by a shell.  It spawns the command, waits for it to return,
     verifies that it exited cleanly (unless told not too below), and
     optionally captures and processes its output.  It accepts many
     keyword arguments to configure its behaviour.

     ‘run-program’ returns three values: the first for the output, the
     second for the error-output, and the third for the return value.
     (Beware that before ASDF 3.0.2.11, it didn’t handle input or
     error-output, and returned only one value, the one for the output
     if any handler was specified, or else the exit code; please upgrade
     ASDF, or at least UIOP, to rely on the new enhanced behaviour.)

     OUTPUT is its most important argument; it specifies how the output
     is captured and processed.  If it is ‘nil’, then the output is
     redirected to the null device, that will discard it.  If it is
     ‘:interactive’, then it is inherited from the current process
     (beware: this may be different from your *STANDARD-OUTPUT*, and
     under SLIME will be on your ‘*inferior-lisp*’ buffer).  If it is
     ‘t’, output goes to your current *STANDARD-OUTPUT* stream.
     Otherwise, OUTPUT should be a value that is a suitable first
     argument to ‘slurp-input-stream’ (see below), or a list of such a
     value and keyword arguments.  In this case, ‘run-program’ will
     create a temporary stream for the program output; the program
     output, in that stream, will be processed by a call to
     ‘slurp-input-stream’, using OUTPUT as the first argument (or if
     it’s a list the first element of OUTPUT and the rest as keywords).
     The primary value resulting from that call (or ‘nil’ if no call was
     needed) will be the first value returned by ‘run-program’.  E.g.,
     using ‘:output :string’ will have it return the entire output
     stream as a string.  And using ‘:output '(:string :stripped t)’
     will have it return the same string stripped of any ending newline.

     ERROR-OUTPUT is similar to OUTPUT, except that the resulting value
     is returned as the second value of ‘run-program’.  ‘t’ designates
     the *ERROR-OUTPUT*.  Also ‘:output’ means redirecting the error
     output to the output stream, in which case ‘nil’ is returned.

     INPUT is similar to OUTPUT, except that ‘vomit-output-stream’ is
     used, no value is returned, and ‘t’ designates the
     *STANDARD-INPUT*.

     ‘element-type’ and ‘external-format’ are passed on to your Lisp
     implementation, when applicable, for creation of the output stream.

     One and only one of the stream slurping or vomiting may or may not
     happen in parallel in parallel with the subprocess, depending on
     options and implementation, and with priority being given to output
     processing.  Other streams are completely produced or consumed
     before or after the subprocess is spawned, using temporary files.

     ‘force-shell’ forces evaluation of the command through a shell,
     even if it was passed as a list rather than a string.  If a shell
     is used, it is ‘/bin/sh’ on Unix or ‘CMD.EXE’ on Windows, except on
     implementations that (erroneously, IMNSHO) insist on consulting
     ‘$SHELL’ like clisp.

     ‘ignore-error-status’ causes ‘run-program’ to not raise an error if
     the spawned program exits in error.  Following POSIX convention, an
     error is anything but a normal exit with status code zero.  By
     default, an error of type ‘subprocess-error’ is raised in this
     case.

     ‘run-program’ works on all platforms supported by ASDF, except
     Genera.  See the source code for more documentation.

 -- Function: slurp-input-stream processor input-stream &key

     ‘slurp-input-stream’ is a generic function of two arguments, a
     target object and an input stream, and accepting keyword arguments.
     Predefined methods based on the target object are as follows:

        • If the object is a function, the function is called with the
          stream as argument.

        • If the object is a cons, its first element is applied to its
          rest appended by a list of the input stream.

        • If the object is an output stream, the contents of the input
          stream are copied to it.  If the LINEWISE keyword argument is
          provided, copying happens line by line, and an optional PREFIX
          is printed before each line.  Otherwise, copying happen based
          on a buffer of size BUFFER-SIZE, using the specified
          ELEMENT-TYPE.

        • If the object is ‘'string’ or ‘:string’, the content is
          captured into a string.  Accepted keywords include the
          ELEMENT-TYPE and a flag STRIPPED, which when true causes any
          single line ending to be removed as per ‘uiop:stripln’.

        • If the object is ‘:lines’, the content is captured as a list
          of strings, one per line, without line ending.  If the COUNT
          keyword argument is provided, it is a maximum count of lines
          to be read.

        • If the object is ‘:line’, the content is captured as with
          ‘:lines’ above, and then its sub-object is extracted with the
          AT argument, which defaults to ‘0’, extracting the first line.
          A number will extract the corresponding line.  See the
          documentation for ‘uiop:access-at’.

        • If the object is ‘:forms’, the content is captured as a list
          of s-expressions, as read by the Lisp reader.  If the COUNT
          argument is provided, it is a maximum count of lines to be
          read.  We recommend you control the syntax with such macro as
          ‘uiop:with-safe-io-syntax’.

        • If the object is ‘:form’, the content is captured as with
          ‘:forms’ above, and then its sub-object is extracted with the
          AT argument, which defaults to ‘0’, extracting the first form.
          A number will extract the corresponding form.  See the
          documentation for ‘uiop:access-at’.  We recommend you control
          the syntax with such macro as ‘uiop:with-safe-io-syntax’.


File: asdf.info,  Node: Getting the latest version,  Next: FAQ,  Prev: Miscellaneous additional functionality,  Up: Top

12 Getting the latest version
*****************************

Decide which version you want.  The ‘master’ branch is where development
happens; its ‘HEAD’ is usually OK, including the latest fixes and
portability tweaks, but an occasional regression may happen despite our
(limited) test suite.

   The ‘release’ branch is what cautious people should be using; it has
usually been tested more, and releases are cut at a point where there
isn’t any known unresolved issue.

   You may get the ASDF source repository using git: ‘git clone
https://gitlab.common-lisp.net/asdf/asdf.git’

   You will find the above referenced tags in this repository.  You can
also browse the repository on
<https://gitlab.common-lisp.net/asdf/asdf>.

   Discussion of ASDF development is conducted on the mailing list
(*note Mailing list::).


File: asdf.info,  Node: FAQ,  Next: Ongoing Work,  Prev: Getting the latest version,  Up: Top

13 FAQ
******

* Menu:

* Where do I report a bug?::
* Mailing list::
* What has changed between ASDF 1 ASDF 2 and ASDF 3?::
* Issues with installing the proper version of ASDF::
* Issues with configuring ASDF::
* Issues with using and extending ASDF to define systems::
* ASDF development FAQs::


File: asdf.info,  Node: Where do I report a bug?,  Next: Mailing list,  Prev: FAQ,  Up: FAQ

13.1 “Where do I report a bug?”
===============================

ASDF bugs are tracked on common-lisp.net’s gitlab::
<https://gitlab.common-lisp.net/asdf/asdf/issues>.  Previously, we had
done bug-tracking on <https://launchpad.net/asdf>, but we are now
consolidating project management on ‘common-lisp.net’.

   If you’re unsure about whether something is a bug, or for general
discussion, use the asdf-devel mailing list (*note Mailing list::).


File: asdf.info,  Node: Mailing list,  Next: What has changed between ASDF 1 ASDF 2 and ASDF 3?,  Prev: Where do I report a bug?,  Up: FAQ

13.2 Mailing list
=================

Discussion of ASDF development is conducted on the mailing list
‘asdf-devel@common-lisp.net’.
<http://common-lisp.net/cgi-bin/mailman/listinfo/asdf-devel>


File: asdf.info,  Node: What has changed between ASDF 1 ASDF 2 and ASDF 3?,  Next: Issues with installing the proper version of ASDF,  Prev: Mailing list,  Up: FAQ

13.3 “What has changed between ASDF 1, ASDF 2, and ASDF 3?”
===========================================================

We released ASDF 2.000 on May 31st 2010, ASDF 3.0.0 on May 15th 2013,
ASDF 3.1.2 on May 6th 2014.  Releases of ASDF 2 and now ASDF 3 have
since then been included in all actively maintained CL implementations
that used to bundle ASDF 1, plus many implementations that previously
did not.  ASDF has been made to work with all actively maintained CL
implementations and even a few implementations that are _not_ actively
maintained.

   Furthermore, it is possible to upgrade from ASDF 1 to ASDF 2 or ASDF
3 on the fly (though we recommend instead upgrading your implementation
or replacing its ASDF module).  For this reason, we have stopped
supporting ASDF 1 and ASDF 2.  If you are using ASDF 1 or ASDF 2 and are
experiencing any kind of issues or limitations, we recommend you upgrade
to ASDF 3 — and we explain how to do that.  *Note Loading ASDF::.

   Note that in the context of compatibility requirements, ASDF 2.27,
released on Feb 1st 2013, and further releases up to 2.33, count as
pre-releases of ASDF 3, and define the ‘:asdf3’ feature, though the
first stable release of ASDF 3 was release 3.0.1.  Significant new or
improved functionality were added in ASDF 3.1; the ‘:asdf3.1’ feature is
present in recent enough versions to detect this functionality; the
first stable release since then was ASDF 3.1.2.  New ‘*features*’ are
only added at major milestones, and the next one will probably be
‘:asdf3.2’.

* Menu:

* What are ASDF 1 2 3?::
* How do I detect the ASDF version?::
* ASDF can portably name files in subdirectories::
* Output translations::
* Source Registry Configuration::
* Usual operations are made easier to the user::
* Many bugs have been fixed::
* ASDF itself is versioned::
* ASDF can be upgraded::
* Decoupled release cycle::
* Pitfalls of the transition to ASDF 2::
* Pitfalls of the upgrade to ASDF 3::
* What happened to the bundle operations::


File: asdf.info,  Node: What are ASDF 1 2 3?,  Next: How do I detect the ASDF version?,  Prev: What has changed between ASDF 1 ASDF 2 and ASDF 3?,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.1 What are ASDF 1, ASDF 2, and ASDF 3?
-------------------------------------------

ASDF 1 refers to any release earlier than 1.369 or so (from August 2001
to October 2009), and to any development revision earlier than 2.000
(May 2010).  If your copy of ASDF doesn’t even contain version
information, it’s an old ASDF 1.  Revisions between 1.656 and 1.728 may
count as development releases for ASDF 2.

   ASDF 2 refers to releases from 2.000 (May 31st 2010) to 2.26 (Oct
30th 2012), and any development revision newer than ASDF 1 and older
than 2.27 (Feb 1st 2013).

   ASDF 3 refers to releases from 2.27 (Feb 1st 2013) to 2.33 and 3.0.0
onward (May 15th 2013).  2.27 to 2.33 count as pre-releases to ASDF 3.

   ASDF 3.1 refers to releases from 3.1.2 (May 6th 2014) onward.  These
releases are also considered part of ASDF 3.


File: asdf.info,  Node: How do I detect the ASDF version?,  Next: ASDF can portably name files in subdirectories,  Prev: What are ASDF 1 2 3?,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.2 How do I detect the ASDF version?
----------------------------------------

All releases of ASDF push ‘:asdf’ onto ‘*features*’.  Releases starting
with ASDF 2 push ‘:asdf2’ onto ‘*features*’.  Releases starting with
ASDF 3 (including 2.27 and later pre-releases) push ‘:asdf3’ onto
‘*features*’.  Furthermore, releases starting with ASDF 3.1.2 (May
2014), though they count as ASDF 3, include enough progress that they
also push ‘:asdf3.1’ onto ‘*features*’.  You may depend on the presence
or absence of these features to write code that takes advantage of
recent ASDF functionality but still works on older versions, or at least
detects the old version and signals an error.

   Additionally, all releases starting with ASDF 2 define a function
‘(asdf:asdf-version)’ you may use to query the version.  All releases
starting with 2.013 display the version number prominently on the second
line of the ‘asdf.lisp’ source file.

   If you are experiencing problems or limitations of any sort with ASDF
1 or ASDF 2, we recommend that you should upgrade to the latest release,
be it ASDF 3 or other.

   Finally, here is a code snippet to programmatically determine what
version of ASDF is loaded, if any, that works on all versions including
very old ones:

     (when (find-package :asdf)
       (let ((ver (symbol-value
                        (or (find-symbol (string :*asdf-version*) :asdf)
                            (find-symbol (string :*asdf-revision*) :asdf)))))
         (etypecase ver
           (string ver)
           (cons (with-output-to-string (s)
                   (loop for (n . m) on ver
                         do (princ n s)
                            (when m (princ "." s)))))
           (null "1.0"))))

   If it returns ‘nil’ then ASDF is not installed.  Otherwise it should
return a string.  If it returns ‘"1.0"’, then it can actually be any
version before 1.77 or so, or some buggy variant of 1.x.  If it returns
anything older than ‘"3.0.1"’, you really need to upgrade your
implementation or at least upgrade its ASDF. *Note Replacing your
implementation's ASDF::.


File: asdf.info,  Node: ASDF can portably name files in subdirectories,  Next: Output translations,  Prev: How do I detect the ASDF version?,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.3 ASDF can portably name files in subdirectories
-----------------------------------------------------

Common Lisp namestrings are not portable, except maybe for logical
pathname namestrings, that themselves have various limitations and
require a lot of setup that is itself ultimately non-portable.

   In ASDF 1, the only portable ways to refer to pathnames inside
systems and components were very awkward, using ‘#.(make-pathname ...)’
and ‘#.(merge-pathnames ...)’.  Even the above were themselves were
inadequate in the general case due to host and device issues, unless
horribly complex patterns were used.  Plenty of simple cases that looked
portable actually weren’t, leading to much confusion and greavance.

   ASDF 2 implements its own portable syntax for strings as pathname
specifiers.  Naming files within a system definition becomes easy and
portable again.  *Note system-relative-pathname: Miscellaneous
additional functionality, ‘merge-pathnames*’, ‘coerce-pathname’.

   On the other hand, there are places where systems used to accept
namestrings where you must now use an explicit pathname object:
‘(defsystem ... :pathname "LOGICAL-HOST:PATH;TO;SYSTEM;" ...)’ must now
be written with the ‘#p’ syntax: ‘(defsystem ... :pathname
#p"LOGICAL-HOST:PATH;TO;SYSTEM;" ...)’.  We recommend against using
pathname objects in general and logical pathnames in particular.  Your
code will be much more portable using ASDF’s pathname specifiers.

   *Note Pathname specifiers::.


File: asdf.info,  Node: Output translations,  Next: Source Registry Configuration,  Prev: ASDF can portably name files in subdirectories,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.4 Output translations
--------------------------

A popular feature added to ASDF was output pathname translation:
‘asdf-binary-locations’, ‘common-lisp-controller’, ‘cl-launch’ and other
hacks were all implementing it in ways both mutually incompatible and
difficult to configure.

   Output pathname translation is essential to share source directories
of portable systems across multiple implementations or variants thereof,
or source directories of shared installations of systems across multiple
users, or combinations of the above.

   In ASDF 2, a standard mechanism is provided for that,
‘asdf-output-translations’, with sensible defaults, adequate
configuration languages, a coherent set of configuration files and
hooks, and support for non-Unix platforms.

   *Note Controlling where ASDF saves compiled files::.


File: asdf.info,  Node: Source Registry Configuration,  Next: Usual operations are made easier to the user,  Prev: Output translations,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.5 Source Registry Configuration
------------------------------------

Configuring ASDF used to require special magic to be applied just at the
right moment, between the moment ASDF is loaded and the moment it is
used, in a way that is specific to the user, the implementation he is
using and the application he is building.

   This made for awkward configuration files and startup scripts that
could not be shared between users, managed by administrators or packaged
by distributions.

   ASDF 2 provides a well-documented way to configure ASDF, with
sensible defaults, adequate configuration languages, and a coherent set
of configuration files and hooks.

   We believe it’s a vast improvement because it decouples application
distribution from library distribution.  The application writer can
avoid thinking where the libraries are, and the library distributor
(dpkg, clbuild, advanced user, etc.)  can configure them once and for
every application.  Yet settings can be easily overridden where needed,
so whoever needs control has exactly as much as required.

   At the same time, ASDF 2 remains compatible with the old magic you
may have in your build scripts (using ‘*central-registry*’ and
‘*system-definition-search-functions*’) to tailor the ASDF configuration
to your build automation needs, and also allows for new magic, simpler
and more powerful magic.

   *Note Controlling where ASDF searches for systems::.


File: asdf.info,  Node: Usual operations are made easier to the user,  Next: Many bugs have been fixed,  Prev: Source Registry Configuration,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.6 Usual operations are made easier to the user
---------------------------------------------------

In ASDF 1, you had to use the awkward syntax ‘(asdf:oos 'asdf:load-op
:foo)’ to load a system, and similarly for ‘compile-op’, ‘test-op’.

   In ASDF 2 and later, you can use shortcuts for the usual operations:
‘(asdf:load-system :foo)’, and similarly for ‘compile-system’,
‘test-system’.


File: asdf.info,  Node: Many bugs have been fixed,  Next: ASDF itself is versioned,  Prev: Usual operations are made easier to the user,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.7 Many bugs have been fixed
--------------------------------

The following issues and many others have been fixed:

   • The infamous TRAVERSE function has been revamped completely between
     ASDF 1 and ASDF 2, with many bugs squashed.  In particular,
     dependencies were not correctly propagated across modules but now
     are.  It has been completely rewritten many times over between ASDF
     2.000 and ASDF 3, with fundamental issues in the original model
     being fixed.  Timestamps were not propagated at all, and now are.
     The internal model of how actions depend on each other is now both
     consistent and complete.  As of ASDF 3.3, multiple phases of
     loading are well supported, wherein correctly interpreting
     ‘defsystem‘ statements in some ‘.asd‘ files itself depends on
     loading other systems, e.g.  via ‘:defsystem-depends-on‘.  The
     ‘:version’ and the ‘:force (system1 .. systemN)’ features have been
     fixed.

   • Performance has been notably improved for large systems (say with
     thousands of components) by using hash-tables instead of linear
     search, and linear-time list accumulation instead of cubic time
     recursive append, for an overall _O(n)_ complexity vs _O(n^4)_.

   • Many features used to not be portable, especially where pathnames
     were involved.  Windows support was notably quirky because of such
     non-portability.

   • The internal test suite used to massively fail on many
     implementations.  While still incomplete, it now fully passes on
     all implementations supported by the test suite, though some tests
     are commented out on a few implementations.

   • Support was lacking for some implementations.  ABCL and GCL were
     notably wholly broken.  ECL extensions were not integrated with
     ASDF release.

   • The documentation was grossly out of date.


File: asdf.info,  Node: ASDF itself is versioned,  Next: ASDF can be upgraded,  Prev: Many bugs have been fixed,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.8 ASDF itself is versioned
-------------------------------

Between new features, old bugs fixed, and new bugs introduced, there
were various releases of ASDF in the wild, and no simple way to check
which release had which feature set.  People using or writing systems
had to either make worst-case assumptions as to what features were
available and worked, or take great pains to have the correct version of
ASDF installed.

   With ASDF 2 and later, we provide a new stable set of working
features that everyone can rely on from now on.  Use ‘#+asdf2’,
‘#+asdf3’, ‘#+asdf3.1’ or ‘#+asdf3.3’ to detect presence of relevant
versions of ASDF and their features, or ‘(asdf:version-satisfies
(asdf:asdf-version) "2.345.67")’ to check the availability of a version
no earlier than required.


File: asdf.info,  Node: ASDF can be upgraded,  Next: Decoupled release cycle,  Prev: ASDF itself is versioned,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.9 ASDF can be upgraded
---------------------------

When an old version of ASDF was loaded, it was very hard to upgrade ASDF
in your current image without breaking everything.  Instead you had to
exit the Lisp process and somehow arrange to start a new one from a
simpler image.  Something that can’t be done from within Lisp, making
automation of it difficult, which compounded with difficulty in
configuration, made the task quite hard.  Yet as we saw before, the task
would have been required to not have to live with the worst case or
non-portable subset of ASDF features.

   With ASDF 2, it is easy to upgrade from ASDF 2 to later versions from
within Lisp, and not too hard to upgrade from ASDF 1 to ASDF 2 from
within Lisp.  We support hot upgrade of ASDF and any breakage is a bug
that we will do our best to fix.  There are still limitations on
upgrade, though, most notably the fact that after you upgrade ASDF, you
must also reload or upgrade all ASDF extensions.


File: asdf.info,  Node: Decoupled release cycle,  Next: Pitfalls of the transition to ASDF 2,  Prev: ASDF can be upgraded,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.10 Decoupled release cycle
-------------------------------

When vendors were releasing their Lisp implementations with ASDF, they
had to basically never change version because neither upgrade nor
downgrade was possible without breaking something for someone, and no
obvious upgrade path was visible and recommendable.

   With ASDF 2, upgrade is possible, easy and can be recommended.  This
means that vendors can safely ship a recent version of ASDF, confident
that if a user isn’t fully satisfied, he can easily upgrade ASDF and
deal with a supported recent version of it.  This means that release
cycles will be causally decoupled, the practical consequence of which
will mean faster convergence towards the latest version for everyone.


File: asdf.info,  Node: Pitfalls of the transition to ASDF 2,  Next: Pitfalls of the upgrade to ASDF 3,  Prev: Decoupled release cycle,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.11 Pitfalls of the transition to ASDF 2
--------------------------------------------

The main pitfalls in upgrading to ASDF 2 seem to be related to the
output translation mechanism.

   • Output translations is enabled by default.  This may surprise some
     users, most of them in pleasant way (we hope), a few of them in an
     unpleasant way.  It is trivial to disable output translations.
     *Note “How can I wholly disable the compiler output cache?”: FAQ.

   • Some systems in the large have been known not to play well with
     output translations.  They were relatively easy to fix.  Once
     again, it is also easy to disable output translations, or to
     override its configuration.

   • The new ASDF output translations are incompatible with
     ASDF-Binary-Locations.  They replace A-B-L, and there is
     compatibility mode to emulate your previous A-B-L configuration.
     See ‘enable-asdf-binary-locations-compatibility’ in *note Backward
     Compatibility: Controlling where ASDF saves compiled files.  But
     thou shalt not load ABL on top of ASDF 2.

   Other issues include the following:

   • ASDF pathname designators are now specified in places where they
     were unspecified, and a few small adjustments have to be made to
     some non-portable defsystems.  Notably, in the ‘:pathname’ argument
     to a ‘defsystem’ and its components, a logical pathname (or
     implementation-dependent hierarchical pathname) must now be
     specified with ‘#p’ syntax where the namestring might have
     previously sufficed; moreover when evaluation is desired ‘#.’ must
     be used, where it wasn’t necessary in the toplevel ‘:pathname’
     argument (but necessary in other ‘:pathname’ arguments).

   • There is a slight performance bug, notably on SBCL, when initially
     searching for ‘asd’ files, the implicit ‘(directory
     "/configured/path/**/*.asd")’ for every configured path ‘(:tree
     "/configured/path/")’ in your ‘source-registry’ configuration can
     cause a slight pause.  Try to ‘(time
     (asdf:initialize-source-registry))’ to see how bad it is or isn’t
     on your system.  If you insist on not having this pause, you can
     avoid the pause by overriding the default source-registry
     configuration and not use any deep ‘:tree’ entry but only
     ‘:directory’ entries or shallow ‘:tree’ entries.  Or you can fix
     your implementation to not be quite that slow when recursing
     through directories.  _Update_: This performance bug fixed the hard
     way in 2.010.

   • On Windows, only LispWorks supports proper default configuration
     pathnames based on the Windows registry.  Other implementations
     make do with environment variables, that you may have to define
     yourself if you’re using an older version of Windows.  Windows
     support is somewhat less tested than Unix support.  Please help
     report and fix bugs.  _Update_: As of ASDF 2.21, all
     implementations should now use the same proper default
     configuration pathnames and they should actually work, though they
     haven’t all been tested.

   • The mechanism by which one customizes a system so that Lisp files
     may use a different extension from the default ‘.lisp’ has changed.
     Previously, the pathname for a component was lazily computed when
     operating on a system, and you would ‘(defmethod source-file-type
     ((component cl-source-file) (system (eql (find-system 'foo))))
     (declare (ignorable component system)) "lis")’.  Now, the pathname
     for a component is eagerly computed when defining the system, and
     instead you will ‘(defclass cl-source-file.lis (cl-source-file)
     ((type :initform "lis")))’ and use ‘:default-component-class
     cl-source-file.lis’ as argument to ‘defsystem’, as detailed in a
     *note How do I create a system definition where all the source
     files have a .cl extension?: FAQ. below.  ‘source-file-type’ is
     deprecated.  To access a component’s file-type, use ‘file-type’,
     instead.  ‘source-file-type’ will be removed.


File: asdf.info,  Node: Pitfalls of the upgrade to ASDF 3,  Next: What happened to the bundle operations,  Prev: Pitfalls of the transition to ASDF 2,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.12 Pitfalls of the upgrade to ASDF 3
-----------------------------------------

While ASDF 3 is largely compatible with ASDF 2, there are a few pitfalls
when upgrading from ASDF 2, due to limitations in ASDF 2.

   • ASDF 2 was designed so it could be upgraded; but upgrading it
     required a special setup at the beginning of your build files.
     Failure to upgrade it early could result in catastrophic attempt to
     self-upgrade in mid-build.

   • Starting with ASDF 3 (2.27 or later), ASDF will automatically
     attempt to upgrade itself as the first step before any system
     operation, to avoid any possibility of such catastrophic mid-build
     self-upgrade.  But that doesn’t help if your old implementation
     still provides ASDF 2.

   • It was unsafe in ASDF 2 for a system definition to declare a
     dependency on ASDF, since it could trigger such catastrophe for
     users who were not carefully configured.  If you declare a
     dependency on a recent enough ASDF, yet want to be nice with these
     potentially misconfigured users, we recommend that you not only
     specify a recent ASDF in your dependencies with ‘:depends-on
     ((:version "asdf" "3.1.2"))’, but that you _also_ check that ASDF 3
     is installed, or else the upgrade catastrophe might happen before
     that specification is checked, by starting your ‘.asd’ file with a
     version check as follows:
          #-asdf3 (error "MY-SYSTEM requires ASDF 3.1.2")

   • When you upgrade from too old a version of ASDF, previously loaded
     ASDF extensions become invalid, and will need to be reloaded.
     Example extensions include CFFI-Grovel, hacks used by ironclad,
     etc.  Since it isn’t possible to automatically detect what
     extensions need to be invalidated and what systems use them, ASDF
     will invalidate _all_ previously loaded systems when it is loaded
     on top of a forward-incompatible ASDF version.  (1)

   • To write a portable build script, you need to rely on a recent
     version of UIOP, but until you have ensured a recent ASDF is
     loaded, you can’t rely on UIOP being present, and thus must
     manually avoid all the pathname pitfalls when loading ASDF itself.

   • Bugs in CMUCL and XCL prevent upgrade of ASDF from an old
     forward-incompatible version.  Happily, CMUCL comes with a recent
     ASDF, and XCL is more of a working demo than something you’d use
     seriously anyway.

   • For the above reasons, your build and startup scripts should load
     ASDF 3, configure it, and upgrade it, among the very first things
     they do.  They should ensure that only ASDF 3 or later is used
     indeed, and error out if ASDF 2 or earlier was used.

   • Now that (since May 2016) all maintained implementations (i.e.
     having had at least one release since 2014, or a commit on their
     public source code repository) provide ASDF 3.1 or later, the
     simple solution is just to use code as below in your setup, and
     when it fails, upgrade your implementation or replace its ASDF.
     (*note Replacing your implementation's ASDF::):
          (require "asdf")
          #-asdf3.1 (error "ASDF 3.1 or bust")

   • For scripts that try to use ASDF simply via ‘require’ at first, and
     make heroic attempts to load it the hard way if at first they don’t
     succeed, see ‘tools/load-asdf.lisp’ distributed with the ASDF
     source repository, or the code of ‘cl-launch’
     (https://cliki.net/cl-launch).

   • Note that in addition to the pitfalls and constraints above, these
     heroic scripts (should you wish to write or modify one), must take
     care to configure ASDF _twice_.  A first time, right after you load
     the old ASDF 2 (or 1!)  and before you upgrade to the new ASDF 3,
     so it may find where you put ASDF 3.  A second time, because most
     implementations can’t handle a smooth upgrade from ASDF 2 to ASDF
     3, so ASDF 3 doesn’t try (anymore) and loses any configuration from
     ASDF 2.
          (ignore-errors (funcall 'require "asdf")) ;; <--- try real hard
          ;; <--- insert heroics here, if that failed to provide ASDF 2 or 3
          ;; <--- insert configuration here, if that succeeded
          (asdf:load-system "asdf")
          ;; <--- re-configure here, too, in case at first you got ASDF 2

   ---------- Footnotes ----------

   (1) Forward incompatibility can be determined using the variable
‘asdf/upgrade::*oldest-forward-compatible-asdf-version*’, which is 2.33
at the time of this writing.


File: asdf.info,  Node: What happened to the bundle operations,  Prev: Pitfalls of the upgrade to ASDF 3,  Up: What has changed between ASDF 1 ASDF 2 and ASDF 3?

13.3.13 What happened to the bundle operations?
-----------------------------------------------

‘asdf-ecl’ and its short-lived successor ‘asdf-bundle’ are no more,
having been replaced by code now built into ASDF 3.  Moreover, the name
of the bundle operations has changed since ASDF 3.1.3.  Starting with
ASDF 3.2.0, ‘load-system’ will once again use ‘load-bundle-op’ instead
of ‘load-op’ on ECL, as originally intended by ‘asdf-ecl’ authors, but
disabled for a long time due to bugs in both ECL and ASDF.

   Note that some of the bundle operations were renamed after ASDF
3.1.3, and the old names have been removed.  Old bundle operations, and
their modern equivalents are:

   • ‘fasl-op’ is now ‘compile-bundle-op’
   • ‘load-fasl-op’ is now ‘load-bundle-op’
   • ‘binary-op’ is now ‘deliver-asd-op’
   • ‘monolithic-fasl-op’ is now ‘monolithic-compile-bundle-op’
   • ‘monolithic-load-fasl-op’ is now ‘monolithic-load-bundle-op’
   • ‘monolithic-binary-op’ is now ‘monolithic-deliver-asd-op’


File: asdf.info,  Node: Issues with installing the proper version of ASDF,  Next: Issues with configuring ASDF,  Prev: What has changed between ASDF 1 ASDF 2 and ASDF 3?,  Up: FAQ

13.4 Issues with installing the proper version of ASDF
======================================================

* Menu:

* My Common Lisp implementation comes with an outdated version of ASDF. What to do?::
* I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?::
* After upgrading ASDF, ASDF (and Quicklisp) can’t find my systems: After upgrading ASDF.


File: asdf.info,  Node: My Common Lisp implementation comes with an outdated version of ASDF. What to do?,  Next: I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?,  Prev: Issues with installing the proper version of ASDF,  Up: Issues with installing the proper version of ASDF

13.4.1 “My Common Lisp implementation comes with an outdated version of ASDF. What to do?”
------------------------------------------------------------------------------------------

If you have a recent implementation, it should already come with ASDF 3
or later.  If you need a more recent version than is provided, we
recommend you simply upgrade ASDF by installing a recent version in a
path configured in your source-registry.  *Note Upgrading ASDF::.

   If you have an old implementation that does not provide ASDF 3, we
recommend you replace your implementation’s ASDF. *Note Replacing your
implementation's ASDF::.


File: asdf.info,  Node: I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?,  Next: After upgrading ASDF,  Prev: My Common Lisp implementation comes with an outdated version of ASDF. What to do?,  Up: Issues with installing the proper version of ASDF

13.4.2 “I’m a Common Lisp implementation vendor. When and how should I upgrade ASDF?”
-------------------------------------------------------------------------------------

Since ASDF 2, it should always be a good time to upgrade to a recent
version of ASDF. You may consult with the maintainer for which specific
version they recommend, but the latest ‘release’ should be correct.
Though we do try to test ASDF releases against all implementations that
we can, we may not be testing against all variants of your
implementation, and we may not be running enough tests; we trust you to
thoroughly test it with your own implementation before you release it.
If there are any issues with the current release, it’s a bug that you
should report upstream and that we will fix ASAP.

   As to how to include ASDF, we recommend the following:

   • If ASDF isn’t loaded yet, then ‘(require "asdf")’ should load the
     version of ASDF that is bundled with your system.  If possible so
     should ‘(require "ASDF")’.  You may have it load some other version
     configured by the user, if you allow such configuration.

   • If your system provides a mechanism to hook into ‘cl:require’, then
     it would be nice to add ASDF to this hook the same way that ABCL,
     CCL, CLISP, CMUCL, ECL, SBCL and SCL do it.  Please send us
     appropriate code to this end.

   • You may, like SBCL since 1.1.13 or MKCL since 1.1.9, have ASDF
     create bundle FASLs that are provided as modules by your Lisp
     distribution.  You may also, but we don’t recommend that anymore,
     as in SBCL up until 1.1.12, have ASDF be implicitly used to
     ‘cl:require’ these modules that are provided by your Lisp
     distribution; if you do, you should add these modules in the
     beginning of both ‘wrapping-source-registry’ and
     ‘wrapping-output-translations’.

   • If you have magic systems as above, like SBCL used to do, then we
     explicitly ask you to _NOT_ distribute ‘asdf.asd’ as part of those
     magic systems.  You should still include the file ‘asdf.lisp’ in
     your source distribution and precompile it in your binary
     distribution, but ‘asdf.asd’ if included at all, should be secluded
     from the magic systems, in a separate file hierarchy.
     Alternatively, you may provide the system after renaming it and its
     ‘.asd’ file to e.g.  ‘asdf-ecl’ and ‘asdf-ecl.asd’, or ‘sb-asdf’
     and ‘sb-asdf.asd’.  Indeed, if you made ‘asdf.asd’ a magic system,
     then users would no longer be able to upgrade ASDF using ASDF
     itself to some version of their preference that they maintain
     independently from your Lisp distribution.

   • If you do not have any such magic systems, or have other non-magic
     systems that you want to bundle with your implementation, then you
     may add them to the ‘wrapping-source-registry’, and you are welcome
     to include ‘asdf.asd’ amongst them.  Non-magic systems should be at
     the back of the ‘wrapping-source-registry’ while magic systems are
     at the front.  If they are precompiled, they should also be in the
     ‘wrapping-output-translations’.

   • Since ASDF 3, the library UIOP comes transcluded in ASDF. But if
     you want to be nice to users who care for UIOP but not for ASDF,
     you may package UIOP separately, so that one may ‘(require "uiop")’
     and not load ASDF, or one may ‘(require "asdf")’ which would
     implicitly require and load the former.

   • Please send us upstream any patches you make to ASDF itself, so we
     can merge them back in for the benefit of your users when they
     upgrade to the upstream version.


File: asdf.info,  Node: After upgrading ASDF,  Prev: I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?,  Up: Issues with installing the proper version of ASDF

13.4.3 After upgrading ASDF, ASDF (and Quicklisp) can’t find my systems
-----------------------------------------------------------------------

When you upgrade the ASDF running in your Lisp image from an ancient
ASDF 2 or older to ASDF 3 or newer, then you may have to re-configure
ASDF. If your configuration only consists in using the source-registry
and output-translations (as it should), and if you are not explicitly
calling ‘asdf:initialize-source-registry’ or
‘asdf:initialize-output-translations’ with a non-nil argument, then ASDF
will reconfigure itself.  Otherwise, you will have to configure ASDF 2
(or older) to find ASDF 3, then configure ASDF 3.  Notably,
*CENTRAL-REGISTRY* is not maintained across upgrades from ASDF 2.  *Note
note about ASDF reconfiguration after upgrade:
reinitializeASDFAfterUpgrade.

   Problems like this may be experienced if one loads Quicklisp (which
as of this writing bundles an obsolete ASDF version 2.26), upgrades
ASDF, and then tries to load new systems.  The correct solution is to
load the most up-to-date ASDF you can, _then_ configure it, _then_ load
Quicklisp and any other extension.  Do _not_ try to upgrade from ASDF 2
_after_ loading Quicklisp, for it will leave both ASDF and Quicklisp
badly misconfigured.  For details see the discussion at the above
cross-reference.

   Also, if you are experiencing such failures due to Quicklisp shipping
an ancient ASDF, please complain to Zach Beane about it.


File: asdf.info,  Node: Issues with configuring ASDF,  Next: Issues with using and extending ASDF to define systems,  Prev: Issues with installing the proper version of ASDF,  Up: FAQ

13.5 Issues with configuring ASDF
=================================

* Menu:

* How can I customize where fasl files are stored?::
* How can I wholly disable the compiler output cache?::
* How can I debug problems finding ASDF systems::


File: asdf.info,  Node: How can I customize where fasl files are stored?,  Next: How can I wholly disable the compiler output cache?,  Prev: Issues with configuring ASDF,  Up: Issues with configuring ASDF

13.5.1 “How can I customize where fasl files are stored?”
---------------------------------------------------------

*Note Controlling where ASDF saves compiled files::.

   Note that in the past there was an add-on to ASDF called
‘ASDF-binary-locations’, developed by Gary King.  That add-on has been
merged into ASDF proper, then superseded by the
‘asdf-output-translations’ facility.

   Note that use of ‘asdf-output-translations’ can interfere with one
aspect of your systems — if your system uses ‘*load-truename*’ to find
files (e.g., if you have some data files stored with your program), then
the relocation that this ASDF customization performs is likely to
interfere.  Use ‘asdf:system-relative-pathname’ to locate a file in the
source directory of some system, and use
‘asdf:apply-output-translations’ to locate a file whose pathname has
been translated by the facility.


File: asdf.info,  Node: How can I wholly disable the compiler output cache?,  Next: How can I debug problems finding ASDF systems,  Prev: How can I customize where fasl files are stored?,  Up: Issues with configuring ASDF

13.5.2 “How can I wholly disable the compiler output cache?”
------------------------------------------------------------

To permanently disable the compiler output cache for all future runs of
ASDF, you can:

     mkdir -p ~/.config/common-lisp/asdf-output-translations.conf.d/
     echo ':disable-cache' > \
     ~/.config/common-lisp/asdf-output-translations.conf.d/99-disable-cache.conf

   This assumes that you didn’t otherwise configure the ASDF files (if
you did, edit them again), and don’t somehow override the configuration
at runtime with a shell variable (see below) or some other runtime
command (e.g.  some call to ‘asdf:initialize-output-translations’).

   To disable the compiler output cache in Lisp processes run by your
current shell, try (assuming ‘bash’ or ‘zsh’) (on Unix and cygwin only):

     export ASDF_OUTPUT_TRANSLATIONS=/:

   To disable the compiler output cache just in the current Lisp
process, use (after loading ASDF but before using it):

     (asdf:disable-output-translations)

   Note that this does _NOT_ belong in a ‘.asd’ file.  Please do not
tamper with ASDF configuration from a ‘.asd’ file, and only do this from
your personal configuration or build scripts.


File: asdf.info,  Node: How can I debug problems finding ASDF systems,  Prev: How can I wholly disable the compiler output cache?,  Up: Issues with configuring ASDF

13.5.3 How can I debug problems finding ASDF systems?
-----------------------------------------------------

Sometimes ASDF will be unable to find and load your systems, although
you believe that it should be able to.  There are a number of things you
can do to debug such issues.

   If you are using ‘asdf:*central-registry*’ (*note Configuring ASDF to
find your systems --- old style::), you can simply look at the pathnames
and namestrings in this variable, and use conventional tools such as
‘cl:probe-file’ and ‘cl:directory’ to poke around and see why your
systems are not being found.

   If you are using one of the newer methods for configuring ASDF’s
system finding (*note Controlling where ASDF searches for systems::),
you can try:

     (alexandria:hash-table-alist asdf/source-registry::*source-registry*)

   (alphabetizing the results here may be helpful).  Or for a
higher-level view:

     (asdf/source-registry:flatten-source-registry)

   Finally, if you use the source registry cache (*note Caching
Results::), you can:
     find ~/common-lisp -name .cl-source-registry.cache
   at the shell.

   It is still, unfortunately, an open question how to monitor ASDF’s
interpretation of its source configuration as it happens.


File: asdf.info,  Node: Issues with using and extending ASDF to define systems,  Next: ASDF development FAQs,  Prev: Issues with configuring ASDF,  Up: FAQ

13.6 Issues with using and extending ASDF to define systems
===========================================================

* Menu:

* How can I cater for unit-testing in my system?::
* How can I cater for documentation generation in my system?::
* How can I maintain non-Lisp (e.g. C) source files?::
* I want to put my module's files at the top level.  How do I do this?::
* How do I create a system definition where all the source files have a .cl extension?::
* How do I mark a source file to be loaded only and not compiled?::
* How do I work with readtables?::
* How can I capture ASDF's output?::
* LOAD-PATHNAME has a weird value::
* How can I produce a binary at a specific path from sources at a specific path::


File: asdf.info,  Node: How can I cater for unit-testing in my system?,  Next: How can I cater for documentation generation in my system?,  Prev: Issues with using and extending ASDF to define systems,  Up: Issues with using and extending ASDF to define systems

13.6.1 “How can I cater for unit-testing in my system?”
-------------------------------------------------------

ASDF provides a predefined test operation, ‘test-op’.  *Note test-op:
Predefined operations of ASDF. The test operation, however, is largely
left to the system definer to specify.  ‘test-op’ has been a topic of
considerable discussion on the asdf-devel mailing list
(http://common-lisp.net/cgi-bin/mailman/listinfo/asdf-devel) (*note
Mailing list::), and on the launchpad bug-tracker
(https://launchpad.net/asdf) (*note Where do I report a bug?::).  We
provide some guidelines in the discussion of ‘test-op’.


File: asdf.info,  Node: How can I cater for documentation generation in my system?,  Next: How can I maintain non-Lisp (e.g. C) source files?,  Prev: How can I cater for unit-testing in my system?,  Up: Issues with using and extending ASDF to define systems

13.6.2 “How can I cater for documentation generation in my system?”
-------------------------------------------------------------------

Various ASDF extensions provide some kind of ‘doc-op’ operation.  See
also <https://bugs.launchpad.net/asdf/+bug/479470>.


File: asdf.info,  Node: How can I maintain non-Lisp (e.g. C) source files?,  Next: I want to put my module's files at the top level. How do I do this?,  Prev: How can I cater for documentation generation in my system?,  Up: Issues with using and extending ASDF to define systems

13.6.3 “How can I maintain non-Lisp (e.g. C) source files?”
-----------------------------------------------------------

See ‘cffi’’s ‘cffi-grovel’.


File: asdf.info,  Node: I want to put my module's files at the top level. How do I do this?,  Next: How do I create a system definition where all the source files have a .cl extension?,  Prev: How can I maintain non-Lisp (e.g. C) source files?,  Up: Issues with using and extending ASDF to define systems

13.6.4 “I want to put my module’s files at the top level. How do I do this?”
----------------------------------------------------------------------------

By default, the files contained in an asdf module go in a subdirectory
with the same name as the module.  However, this can be overridden by
adding a ‘:pathname ""’ argument to the module description.  For
example, here is how it could be done in the spatial-trees ASDF system
definition for ASDF 2 or later:

     (asdf:defsystem "spatial-trees"
       :components
       ((:module "base"
                 :pathname ""
                 :components
                 ((:file "package")
                  (:file "basedefs" :depends-on ("package"))
                  (:file "rectangles" :depends-on ("package"))))
        (:module tree-impls
                 :depends-on ("base")
                 :pathname ""
                 :components
                 ((:file "r-trees")
                  (:file "greene-trees" :depends-on ("r-trees"))
                  (:file "rstar-trees" :depends-on ("r-trees"))
                  (:file "rplus-trees" :depends-on ("r-trees"))
                  (:file "x-trees" :depends-on ("r-trees" "rstar-trees"))))
        (:module viz
                 :depends-on ("base")
                 :pathname ""
                 :components
                 ((:static-file "spatial-tree-viz.lisp")))
        (:module tests
                 :depends-on ("base")
                 :pathname ""
                 :components
                 ((:static-file "spatial-tree-test.lisp")))
        (:static-file "LICENCE")
        (:static-file "TODO")))

   All of the files in the ‘tree-impls’ module are at the top level,
instead of in a ‘tree-impls/’ subdirectory.

   Note that the argument to ‘:pathname’ can be either a pathname object
or a string.  A pathname object can be constructed with the
‘#p"foo/bar/"’ syntax, but this is discouraged because the results of
parsing a namestring are not portable.  A pathname can only be portably
constructed with such syntax as ‘#.(make-pathname :directory '(:relative
"foo" "bar"))’, and similarly the current directory can only be portably
specified as ‘#.(make-pathname :directory '(:relative))’.  However, as
of ASDF 2, you can portably use a string to denote a pathname.  The
string will be parsed as a ‘/’-separated path from the current
directory, such that the empty string ‘""’ denotes the current
directory, and ‘"foo/bar"’ (no trailing ‘/’ required in the case of
modules) portably denotes the same subdirectory as above.  When files
are specified, the last ‘/’-separated component is interpreted either as
the name component of a pathname (if the component class specifies a
pathname type), or as a name component plus optional dot-separated type
component (if the component class doesn’t specifies a pathname type).


File: asdf.info,  Node: How do I create a system definition where all the source files have a .cl extension?,  Next: How do I mark a source file to be loaded only and not compiled?,  Prev: I want to put my module's files at the top level. How do I do this?,  Up: Issues with using and extending ASDF to define systems

13.6.5 How do I create a system definition where all the source files have a .cl extension?
-------------------------------------------------------------------------------------------

Starting with ASDF 2.014.14, you may just pass the builtin class
‘cl-source-file.cl’ as the ‘:default-component-class’ argument to
‘defsystem’:

     (defsystem my-cl-system
       :default-component-class cl-source-file.cl
       ...)

   Another builtin class ‘cl-source-file.lsp’ is offered for files
ending in ‘.lsp’.

   If you want to use a different extension for which ASDF doesn’t
provide builtin support, or want to support versions of ASDF earlier
than 2.014.14 (but later than 2.000), you can define a class as follows:

     ;; Prologue: make sure we're using a sane package.
     (defpackage :my-asdf-extension
        (:use :asdf :common-lisp)
        (:export #:cl-source-file.lis))
     (in-package :my-asdf-extension)

     (defclass cl-source-file.lis (cl-source-file)
       ((type :initform "lis")))

   Then you can use it as follows:
     (defsystem my-cl-system
       :default-component-class my-asdf-extension:cl-source-file.lis
       ...)

   Of course, if you’re in the same package, e.g.  in the same file, you
won’t need to use the package qualifier before ‘cl-source-file.lis’.
Actually, if all you’re doing is defining this class and using it in the
same file without other fancy definitions, you might skip package
complications:

     (in-package :asdf)
     (defclass cl-source-file.lis (cl-source-file)
        ((type :initform "lis")))
     (defsystem my-cl-system
       :default-component-class cl-source-file.lis
       ...)


File: asdf.info,  Node: How do I mark a source file to be loaded only and not compiled?,  Next: How do I work with readtables?,  Prev: How do I create a system definition where all the source files have a .cl extension?,  Up: Issues with using and extending ASDF to define systems

13.6.6 How do I mark a source file to be loaded only and not compiled?
----------------------------------------------------------------------

There is no provision in ASDF for ensuring that some components are
always loaded as source, while others are always compiled.  There is
‘load-source-op’ (*note load-source-op: Predefined operations of ASDF.),
but that is an operation to be applied to a system as a whole, not to
one or another specific source files.  While this idea often comes up in
discussions, it doesn’t play well with either the linking model of ECL
or with various bundle operations.  In addition, the dependency model of
ASDF would have to be modified incompatibly to allow for such a trick.


File: asdf.info,  Node: How do I work with readtables?,  Next: How can I capture ASDF's output?,  Prev: How do I mark a source file to be loaded only and not compiled?,  Up: Issues with using and extending ASDF to define systems

13.6.7 How do I work with readtables?
-------------------------------------

It is possible to configure the lisp syntax by modifying the
currently-active readtable.  However, this same readtable is shared
globally by all software being compiled by ASDF, especially since ‘load’
and ‘compile-file’ both bind *READTABLE*, so that its value is the same
across the build at the start of every file (unless overridden by some
‘perform :around’ method), even if a file locally binds it to a
different readtable during the build.

   Therefore, the following hygiene restrictions apply.  If you don’t
abide by these restrictions, there will be situations where your output
files will be corrupted during an incremental build.  We are not trying
to prescribe new restrictions for the sake of good style: these
restrictions have always applied implicitly, and we are simply
describing what they have always been.

   • It is forbidden to modifying any standard character or standard
     macro dispatch defined in the CLHS.
   • No two dependencies may assign different meanings to the same
     non-standard character.
   • Using any non-standard character while expecting the implementation
     to treat some way counts as such an assignment of meaning.
   • libraries need to document these assignments of meaning to
     non-standard characters.
   • free software libraries will register these changes on:
     <http://www.cliki.net/Macro%20Characters>

   If you want to use readtable modifications that cannot abide by those
restrictions, you _must_ create a different readtable object and set
*READTABLE* to temporarily bind it to your new readtable (which will be
undone after processing the file).

   For that, we recommend you use system ‘named-readtables’ to define or
combine such readtables using ‘named-readtables:defreadtable’ and use
them using ‘named-readtables:in-readtable’.  Equivalently, you can use
system ‘cl-syntax’, that itself uses ‘named-readtables’, but may someday
do more with, e.g.  *PRINT-PPRINT-DISPATCH*.

   For even more advanced syntax modification beyond what a readtable
can express, you may consider either:
   • a ‘perform’ method that compiles a constant file that contains a
     single form ‘#.*code-read-with-alternate-reader*’ in an environment
     where this special variable was bound to the code read by your
     alternate reader, or
   • using the system ‘reader-interception’.

   Beware that it is unsafe to use ASDF from the REPL to compile or load
systems while the readtable isn’t the shared readtable previously used
to build software.  You _must_ manually undo any binding of *READTABLE*
at the REPL and restore its initial value whenever you call ‘operate’
(via e.g.  ‘load-system’, ‘test-system’ or ‘require’) from a REPL that
is using a different readtable.

13.6.7.1 How should my system use a readtable exported by another system?
.........................................................................

Use from the ‘named-readtables’ system the macro
‘named-readtables:in-readtable’.

   If the other system fails to use ‘named-readtables’, fix it and send
a patch upstream.  In the day and age of Quicklisp and clbuild, there is
little reason to eschew using such an important library anymore.

13.6.7.2 How should my library make a readtable available to other systems?
...........................................................................

Use from the ‘named-readtables’ system the macro
‘named-readtables:defreadtable’.


File: asdf.info,  Node: How can I capture ASDF's output?,  Next: LOAD-PATHNAME has a weird value,  Prev: How do I work with readtables?,  Up: Issues with using and extending ASDF to define systems

13.6.8 How can I capture ASDF’s output?
---------------------------------------

Output from ASDF and ASDF extensions are sent to the CL stream
‘*standard-output*’, so rebinding that stream around calls to
‘asdf:operate’ should redirect all output from ASDF operations.


File: asdf.info,  Node: LOAD-PATHNAME has a weird value,  Next: How can I produce a binary at a specific path from sources at a specific path,  Prev: How can I capture ASDF's output?,  Up: Issues with using and extending ASDF to define systems

13.6.9 *LOAD-PATHNAME* and *LOAD-TRUENAME* have weird values, help!
-------------------------------------------------------------------

Conventional Common Lisp code may use ‘*LOAD-TRUENAME*’ or
‘*LOAD-PATHNAME*’ to find files adjacent to source files.  This will
generally _not_ work in ASDF-loaded systems.  Recall that ASDF relocates
the FASL files it builds, typically to a special cache directory.  Thus
the value of ‘*LOAD-PATHNAME*’ and ‘*LOAD-TRUENAME*’ at load time, when
ASDF is loading your system, will typically be a pathname in that cache
directory, and useless to you for finding other system components.

   There are two ways to work around this problem:
  1. Use the ‘system-relative-pathname’ function.  This can readily be
     used from outside the system, but it is probably not good software
     engineering to require a source file _of_ a system to know what
     system it is going to be part of.  Contained objects should not
     have to know their containers.
  2. Store the pathname at compile time, so that you get the pathname of
     the source file, which is presumably what you want.  To do this,
     you can capture the value of ‘(or *compile-file-pathname*
     *load-truename*)’ (or ‘*LOAD-PATHNAME*’, if you prefer) in a macro
     expansion or other compile-time evaluated context.


File: asdf.info,  Node: How can I produce a binary at a specific path from sources at a specific path,  Prev: LOAD-PATHNAME has a weird value,  Up: Issues with using and extending ASDF to define systems

13.6.10 How can I produce a binary at a specific path from sources at a specific path?
--------------------------------------------------------------------------------------

Especially when integrating with outside build systems, it’s useful to
have fine-grained control over where ASDF puts output files.  The
following is an example of a build script that takes the directory to
find the source and the path to put the resulting binary at, and
compiles a system there.

     (in-package :cl-user)

     ;; Tell ASDF where to find your source files. This may not
     ;; be necessary if you've already configured this elsewhere.
     (asdf:initialize-source-registry
       `(:source-registry
          :inherit-configuration
          (:directory ,(uiop:getenv-absolute-directory "SRC"))))

     ;; Set the output pathname when building the system.
     (defmethod asdf:output-files ((o asdf:image-op)
                                   (system (eql (asdf:find-system FOO))))
       (declare (ignorable system))
       (values (list (uiop:getenv-pathname "OUT")) t))

     ;; Build the system.
     (asdf:operate-on-system 'asdf:program-op FOO)
     (uiop:quit)


File: asdf.info,  Node: ASDF development FAQs,  Prev: Issues with using and extending ASDF to define systems,  Up: FAQ

13.7 ASDF development FAQs
==========================

* Menu:

* How do I run the tests interactively in a REPL?::


File: asdf.info,  Node: How do I run the tests interactively in a REPL?,  Prev: ASDF development FAQs,  Up: ASDF development FAQs

13.7.1 How do I run the tests interactively in a REPL?
------------------------------------------------------

This not-so-frequently asked question is primarily for ASDF developers,
but those who encounter an unexpected error in some test may be
interested, too.

   Here’s the procedure for experimenting with tests in a REPL:
     ;; BEWARE! Some tests expect you to be in the .../asdf/test directory
     ;; If your REPL is not there yet, change your current directory:
     ;; under SLIME, you may: ,change-directory ~/common-lisp/asdf/test/
     ;; otherwise you may evaluate something like:
     (require "asdf") (asdf:upgrade-asdf) ;load UIOP & update asdf.lisp
     (uiop:chdir (asdf:system-relative-pathname :asdf "test/"))
     (setf *default-pathname-defaults* (uiop:getcwd))

     ;; Load the test script support.
     (load "script-support.lisp")

     ;; Initialize the script support for interaction.
     ;; This will also change your *package* to asdf-test
     ;; after frobbing the asdf-test package to make it usable.
     ;; NB: this function is also available from package cl-user,
     ;; and also available with the shorter name da in both packages.
     (asdf-test:debug-asdf)

     ;; Now, you may experiment with test code from a .script file.
     ;; See the instructions given at the end of your failing test
     ;; to identify which form is needed, e.g.
     (run-test-script "test-utilities.script")


File: asdf.info,  Node: Ongoing Work,  Next: Bibliography,  Prev: FAQ,  Up: Top

Ongoing Work
************

For an active list of things to be done, see the ‘TODO’ file in the
source repository.

   Also, bugs are currently tracked on launchpad:
<https://launchpad.net/asdf>.


File: asdf.info,  Node: Bibliography,  Next: Concept Index,  Prev: Ongoing Work,  Up: Top

Bibliography
************

   • Andrey Mokhov, Neil Mitchell and Simon Peyton Jones: “Build Systems
     à la Carte”, International Conference on Functional Programming,
     2018.
     <https://www.microsoft.com/en-us/research/uploads/prod/2018/03/build-systems-final.pdf>
     This influential article provides axes along which to describe
     build systems in general; ASDF, in addition to being in-image (an
     axis not considered by these authors), has the following
     characteristics: ASDF’s persistent build information is file
     modification times (the way ASDF is written, it should be easy
     enough to write an extension that modifies it to use a “cloud
     cache” à la Bazel, but that would involve using some database,
     network and cryptographic libraries, which cannot reasonably be
     included in the base ASDF, that must remain a minimal
     bootstrappable system with no external dependencies).  The object
     model of ASDF was initially designed for “static” dependencies with
     a “topological” scheduler, but its ‘defsystem-depends-on’ mechanism
     (and more generally, the ability to call ASDF from within an ‘.asd’
     file) allows for multiple _phases_ of execution resulting in
     “dynamic” dependencies with a “suspending” scheduler.  The
     rebuilder essentially uses a “dirty bit”, except that the in-image
     model and the multiple phase support mean that’s actually more than
     a bit: instead it’s three bits plus the timestamp plus a phase
     depth level.  The build is guaranteed “minimal” in number of steps
     computed.  It is local.  It assumes but does not enforce
     determinism.  It does not assume early cutoff of the build when
     rebuild dependencies didn’t change.
   • Robert Goldman, Elias Pipping, and François-René Rideau:
     “Delivering Common Lisp Applications with ASDF 3.3”, European Lisp
     Symposium, 2017.  <https://github.com/fare/asdf2017> This short
     article gives an overview of the changes in ASDF 3.2 and 3.3,
     including improved application delivery, asynchronous subprocess
     management, correct support for multi-phase builds, and enhanced
     source location configuration.
   • Francois-Rene Rideau: “ASDF 3, or Why Lisp is Now an Acceptable
     Scripting Language”, European Lisp Symposium, 2014.
     <https://github.com/fare/asdf3-2013> This article describes the
     innovations in ASDF 3 and 3.1, as well as historical information on
     previous versions.
   • Alastair Bridgewater: “Quick-build” (private communication), 2012.
     ‘quick-build’ is a simple and robust one file, one package build
     system, similar to ‘faslpath’, in 182 lines of code (117 of which
     are neither blank nor comments nor docstrings).  Unhappily, it
     remains unpublished and its IP status is unclear as of April 2014.
     ‘asdf/package-system’ is mostly compatible with it, modulo a
     different setup for toplevel hierarchies.
   • Zach Beane: “Quicklisp”, 2011.  The Quicklisp blog and Xach’s
     personal blogs contain information on Quicklisp.
     <http://blog.quicklisp.org/> <http://lispblog.xach.com/> (new)
     <http://xach.livejournal.com/> (old)
   • Francois-Rene Rideau and Robert Goldman: “Evolving ASDF: More
     Cooperation, Less Coordination”, International Lisp Conference,
     2010.  This article describes the main issues solved by ASDF 2, and
     exposes its design principles.
     <https://common-lisp.net/project/asdf/ilc2010draft.pdf>
     <http://rpgoldman.goldman-tribe.org/papers/ilc2010-asdf.pdf>
   • Francois-Rene Rideau and Spencer Brody: “XCVB: an eXtensible
     Component Verifier and Builder for Common Lisp”, International Lisp
     Conference, 2009.  This article describes XCVB, a proposed
     competitor for ASDF; many of its ideas have been incorporated into
     ASDF 2 and 3, though many other ideas still haven’t.
     <https://common-lisp.net/project/xcvb/>
   • Peter von Etter: “faslpath”, 2009.  ‘faslpath’ is similar to the
     latter ‘quick-build’ and our yet latter ‘asdf/package-system’
     extension, except that it uses dot ‘.’ rather than slash ‘/’ as a
     separator.  <https://code.google.com/p/faslpath/>
   • Drew McDermott: “A Framework for Maintaining the Coherence of a
     Running Lisp,” International Lisp Conference, 2005.
     <http://www.cs.yale.edu/homes/dvm/papers/lisp05.pdf>
   • Dan Barlow: “ASDF Manual”, 2004.  Older versions of this document
     from the days of ASDF 1; they include ideas laid down by Dan
     Barlow, and comparisons with older defsystems (‘mk-defsystem’) and
     defsystem (‘defsystem-4’, kmp’s Memo 801).
   • Marco Antoniotti and Peter Van Eynde: “‘DEFSYSTEM’: A ‘make’ for
     Common Lisp, A Thoughtful Re-Implementation of an Old Idea”, 2002.
     The ‘defsystem-4’ proposal available in the CLOCC repository.
   • Mark Kantrovitz: “Defsystem: A Portable Make Facility for Common
     Lisp”, 1990.  The classic ‘mk-defsystem’, later variants of which
     are available in the CLOCC repository as ‘defsystem-3.x’.
   • Richard Elliot Robbins: “BUILD: A Tool for Maintaining Consistency
     in Modular Systems”, MIT AI TR 874, 1985.
     <http://www.dtic.mil/dtic/tr/fulltext/u2/a162744.pdf>
   • Kent M. Pitman (kmp): “The Description of Large Systems”, MIT AI
     Memo 801, 1984.  Available in updated-for-CL form on the web at
     <http://nhplace.com/kent/Papers/Large-Systems.html>
   • Dan Weinreb and David Moon: “Lisp Machine Manual”, 3rd Edition MIT,
     March 1981.  The famous CHINE NUAL describes one of the earliest
     variants of DEFSYSTEM. (NB: Not present in the second preliminary
     version of January 1979)
     <http://bitsavers.org/pdf/mit/cadr/chinual_3rdEd_Mar81.pdf>


File: asdf.info,  Node: Concept Index,  Next: Function and Macro Index,  Prev: Bibliography,  Up: Top

Concept Index
*************

[index]
* Menu:

* *features*:                            How do I detect the ASDF version?.
                                                              (line   6)
* :also-exclude source config directive: Configuration DSL.   (line   6)
* :around-compile:                       Controlling file compilation.
                                                              (line   6)
* :asdf:                                 Introduction.        (line   6)
* :asdf2:                                Introduction.        (line   6)
* :asdf3:                                Introduction.        (line   6)
* :build-operation:                      The defsystem grammar.
                                                              (line 192)
* :compile-check:                        Controlling file compilation.
                                                              (line   6)
* :default-registry source config directive: Configuration DSL.
                                                              (line   6)
* :defsystem-depends-on:                 The defsystem grammar.
                                                              (line 184)
* :directory source config directive:    Configuration DSL.   (line   6)
* :entry-point:                          The defsystem grammar.
                                                              (line 481)
* :exclude source config directive:      Configuration DSL.   (line   6)
* :feature dependencies:                 The defsystem grammar.
                                                              (line 339)
* :if-feature component option:          The defsystem grammar.
                                                              (line 458)
* :ignore-invalid-entries source config directive: Configuration DSL.
                                                              (line   6)
* :include source config directive:      Configuration DSL.   (line   6)
* :inherit-configuration source config directive: Configuration DSL.
                                                              (line   6)
* :require dependencies:                 The defsystem grammar.
                                                              (line 329)
* :tree source config directive:         Configuration DSL.   (line   6)
* :version:                              The defsystem form.  (line  68)
* :version <1>:                          The defsystem grammar.
                                                              (line 295)
* :version <2>:                          Common attributes of components.
                                                              (line  23)
* :weakly-depends-on:                    The defsystem grammar.
                                                              (line 204)
* also-exclude source config directive:  Configuration DSL.   (line   6)
* around-compile keyword:                Controlling file compilation.
                                                              (line   6)
* ASDF output:                           How can I capture ASDF's output?.
                                                              (line   6)
* ASDF versions:                         Introduction.        (line   6)
* ASDF-BINARY-LOCATIONS compatibility:   Output Backward Compatibility.
                                                              (line   6)
* asdf-output-translations:              Controlling where ASDF saves compiled files.
                                                              (line   6)
* ASDF-related features:                 Introduction.        (line   6)
* asdf-user:                             The defsystem form.  (line   6)
* ASDF-USER package:                     Components.          (line  41)
* bug tracker:                           Where do I report a bug?.
                                                              (line   6)
* build-operation:                       Convenience Functions.
                                                              (line  61)
* bundle operations:                     Predefined operations of ASDF.
                                                              (line  94)
* bundle operations <1>:                 What happened to the bundle operations.
                                                              (line   6)
* bundle operations <2>:                 How can I produce a binary at a specific path from sources at a specific path.
                                                              (line   6)
* Capturing ASDF output:                 How can I capture ASDF's output?.
                                                              (line   6)
* compile-check keyword:                 Controlling file compilation.
                                                              (line   6)
* component:                             Components.          (line   6)
* component designator:                  Components.          (line   6)
* default-registry source config directive: Configuration DSL.
                                                              (line   6)
* DEFSYSTEM grammar:                     The defsystem grammar.
                                                              (line   6)
* directory source config directive:     Configuration DSL.   (line   6)
* exclude source config directive:       Configuration DSL.   (line   6)
* Extending ASDF’s defsystem parser:     Parsing system definitions.
                                                              (line   6)
* gitlab:                                Where do I report a bug?.
                                                              (line   6)
* ignore-invalid-entries source config directive: Configuration DSL.
                                                              (line   6)
* immutable systems:                     Operations.          (line  67)
* immutable systems <1>:                 Miscellaneous Functions.
                                                              (line 108)
* include source config directive:       Configuration DSL.   (line   6)
* inherit-configuration source config directive: Configuration DSL.
                                                              (line   6)
* launchpad:                             Where do I report a bug?.
                                                              (line   6)
* logical pathnames:                     The defsystem grammar.
                                                              (line 357)
* mailing list:                          Mailing list.        (line   6)
* One package per file systems:          The package-inferred-system extension.
                                                              (line   6)
* operation:                             Operations.          (line   6)
* Package inferred systems:              The package-inferred-system extension.
                                                              (line   6)
* Packages, inferring dependencies from: The package-inferred-system extension.
                                                              (line   6)
* Parsing system definitions:            Parsing system definitions.
                                                              (line   6)
* pathname specifiers:                   The defsystem grammar.
                                                              (line 226)
* Primary system name:                   Components.          (line  70)
* Quicklisp:                             After upgrading ASDF.
                                                              (line   6)
* readtables:                            How do I work with readtables?.
                                                              (line   6)
* serial dependencies:                   The defsystem grammar.
                                                              (line 403)
* system:                                Components.          (line   6)
* system designator:                     Components.          (line   6)
* System names:                          Components.          (line  70)
* Testing for ASDF:                      Introduction.        (line   6)
* tree source config directive:          Configuration DSL.   (line   6)
* version specifiers:                    The defsystem grammar.
                                                              (line 295)


File: asdf.info,  Node: Function and Macro Index,  Next: Variable Index,  Prev: Concept Index,  Up: Top

Function and Macro Index
************************

[index]
* Menu:

* already-loaded-systems:                Convenience Functions.
                                                              (line  92)
* apply-output-translations:             Output location API. (line  36)
* asdf-version:                          How do I detect the ASDF version?.
                                                              (line   6)
* class-for-type:                        Parsing system definitions.
                                                              (line  36)
* clear-configuration:                   Resetting the ASDF configuration.
                                                              (line  10)
* clear-output-translations:             Configuring where ASDF stores object files.
                                                              (line   6)
* clear-output-translations <1>:         Output location API. (line  22)
* clear-source-registry:                 Configuration API.   (line  19)
* clear-system:                          Miscellaneous Functions.
                                                              (line  34)
* coerce-name:                           Creating new operations.
                                                              (line  70)
* coerce-name <1>:                       Components.          (line 140)
* coerce-name <2>:                       Common attributes of components.
                                                              (line  12)
* compile-file*:                         Controlling file compilation.
                                                              (line   6)
* compile-system:                        Convenience Functions.
                                                              (line  35)
* component-depends-on:                  Creating new operations.
                                                              (line  45)
* component-pathname:                    Common attributes of components.
                                                              (line 154)
* compute-component-children:            Parsing system definitions.
                                                              (line  24)
* define-package:                        The package-inferred-system extension.
                                                              (line  64)
* defsystem:                             The defsystem form.  (line   6)
* defsystem <1>:                         A more involved example.
                                                              (line   6)
* defsystem <2>:                         The defsystem grammar.
                                                              (line   6)
* disable-output-translations:           Output location API. (line  17)
* enable-asdf-binary-locations-compatibility: Output Backward Compatibility.
                                                              (line  27)
* ensure-output-translations:            Output location API. (line  31)
* ensure-source-registry:                Configuration API.   (line  28)
* file-type:                             Pitfalls of the transition to ASDF 2.
                                                              (line  77)
* find-component:                        Creating new operations.
                                                              (line  70)
* find-component <1>:                    Components.          (line 132)
* find-system:                           Components.          (line  21)
* flatten-source-registry:               How can I debug problems finding ASDF systems.
                                                              (line  25)
* initialize-output-translations:        Output location API. (line   8)
* initialize-source-registry:            Configuration API.   (line  10)
* input-files:                           Creating new operations.
                                                              (line  81)
* input-files <1>:                       Creating new operations.
                                                              (line  88)
* load-asd:                              The defsystem form.  (line   6)
* load-system:                           Convenience Functions.
                                                              (line  29)
* locate-system:                         Components.          (line  97)
* make:                                  Convenience Functions.
                                                              (line  51)
* make-operation:                        Operations.          (line  78)
* merge-pathnames*:                      Some Utility Functions.
                                                              (line  63)
* oos:                                   Convenience Functions.
                                                              (line  21)
* oos <1>:                               Operations.          (line  33)
* operate:                               Convenience Functions.
                                                              (line  21)
* operate <1>:                           Operations.          (line  31)
* operation-done-p:                      Creating new operations.
                                                              (line  92)
* output-files:                          Creating new operations.
                                                              (line  33)
* package-inferred-system:               The package-inferred-system extension.
                                                              (line   6)
* parse-component-form:                  Parsing system definitions.
                                                              (line  15)
* parse-unix-namestring:                 Some Utility Functions.
                                                              (line  13)
* perform:                               Creating new operations.
                                                              (line  19)
* primary-system-name:                   Components.          (line  70)
* primary-system-name <1>:               Components.          (line  91)
* register-immutable-system:             Operations.          (line  67)
* register-immutable-system <1>:         Miscellaneous Functions.
                                                              (line  87)
* register-preloaded-system:             Miscellaneous Functions.
                                                              (line  61)
* register-system-packages:              The package-inferred-system extension.
                                                              (line  58)
* require-system:                        Convenience Functions.
                                                              (line  62)
* run-program:                           Some Utility Functions.
                                                              (line  90)
* run-shell-command:                     Miscellaneous Functions.
                                                              (line 110)
* slurp-input-stream:                    Some Utility Functions.
                                                              (line 162)
* source-file-type:                      Pitfalls of the transition to ASDF 2.
                                                              (line  77)
* subpathname:                           Some Utility Functions.
                                                              (line  72)
* subpathname*:                          Some Utility Functions.
                                                              (line  85)
* system-defsystem-depends-on:           Information about system dependencies.
                                                              (line  10)
* system-depends-on:                     Information about system dependencies.
                                                              (line  12)
* system-relative-pathname:              Miscellaneous Functions.
                                                              (line   8)
* system-relative-pathname <1>:          LOAD-PATHNAME has a weird value.
                                                              (line  15)
* system-source-directory:               Miscellaneous Functions.
                                                              (line  25)
* system-weakly-depends-on:              Information about system dependencies.
                                                              (line  14)
* test-system:                           Convenience Functions.
                                                              (line  46)
* traverse:                              Operations.          (line  75)
* uiop:define-package:                   The package-inferred-system extension.
                                                              (line  64)
* version-satisfies:                     Common attributes of components.
                                                              (line  23)
* version-satisfies <1>:                 Functions.           (line   6)


File: asdf.info,  Node: Variable Index,  Next: Class and Type Index,  Prev: Function and Macro Index,  Up: Top

Variable Index
**************

[index]
* Menu:

* *central-registry*:                    After upgrading ASDF.
                                                              (line   6)
* *central-registry* <1>:                How can I debug problems finding ASDF systems.
                                                              (line  10)
* *compile-file-failure-behaviour*:      Error handling.      (line  19)
* *compile-file-warnings-behaviour*:     Error handling.      (line  19)
* *default-source-registry-exclusions*:  Search Algorithm.    (line   6)
* *features*:                            Introduction.        (line   6)
* *image-dump-hook*:                     Resetting the ASDF configuration.
                                                              (line  14)
* *LOAD-PATHNAME*:                       LOAD-PATHNAME has a weird value.
                                                              (line   6)
* *LOAD-TRUENAME*:                       LOAD-PATHNAME has a weird value.
                                                              (line   6)
* *nil-pathname*:                        Some Utility Functions.
                                                              (line  44)
* *oldest-forward-compatible-asdf-version*: Pitfalls of the upgrade to ASDF 3.
                                                              (line  86)
* *source-registry*:                     How can I debug problems finding ASDF systems.
                                                              (line  20)
* *source-registry-parameter*:           *source-registry-parameter* variable.
                                                              (line   6)
* *standard-output*:                     How can I capture ASDF's output?.
                                                              (line   6)
* *system-definition-search-functions*:  Components.          (line   6)
* asdf::*user-cache*:                    Output Configuration DSL.
                                                              (line 118)
* ASDF_OUTPUT_TRANSLATIONS:              Controlling where ASDF saves compiled files.
                                                              (line   6)


File: asdf.info,  Node: Class and Type Index,  Prev: Variable Index,  Up: Top

Class and Type Index
********************

[index]
* Menu:

* binary-op (obsolete):                  What happened to the bundle operations.
                                                              (line   6)
* compile-bundle-op:                     Predefined operations of ASDF.
                                                              (line  94)
* compile-bundle-op <1>:                 What happened to the bundle operations.
                                                              (line   6)
* compile-concatenated-source-op:        Predefined operations of ASDF.
                                                              (line 189)
* compile-op:                            Predefined operations of ASDF.
                                                              (line  11)
* component:                             The object model of ASDF.
                                                              (line   6)
* concatenate-source-op:                 Predefined operations of ASDF.
                                                              (line 186)
* deliver-asd-op:                        Predefined operations of ASDF.
                                                              (line  98)
* deliver-asd-op <1>:                    What happened to the bundle operations.
                                                              (line   6)
* dll-op:                                Predefined operations of ASDF.
                                                              (line 102)
* fasl-op (obsolete):                    What happened to the bundle operations.
                                                              (line   6)
* image-op:                              Predefined operations of ASDF.
                                                              (line 104)
* lib-op:                                Predefined operations of ASDF.
                                                              (line 100)
* load-bundle-op:                        Predefined operations of ASDF.
                                                              (line  96)
* load-bundle-op <1>:                    What happened to the bundle operations.
                                                              (line   6)
* load-compiled-concatenated-source-op:  Predefined operations of ASDF.
                                                              (line 190)
* load-concatenated-source-op:           Predefined operations of ASDF.
                                                              (line 188)
* load-fasl-op (obsolete):               What happened to the bundle operations.
                                                              (line   6)
* load-op:                               Predefined operations of ASDF.
                                                              (line  25)
* load-source-op:                        Predefined operations of ASDF.
                                                              (line  45)
* module:                                Pre-defined subclasses of component.
                                                              (line  23)
* monolithic-binary-op (obsolete):       What happened to the bundle operations.
                                                              (line   6)
* monolithic-compile-bundle-op:          Predefined operations of ASDF.
                                                              (line  95)
* monolithic-compile-bundle-op <1>:      What happened to the bundle operations.
                                                              (line   6)
* monolithic-compile-concatenated-source-op: Predefined operations of ASDF.
                                                              (line 192)
* monolithic-concatenate-source-op:      Predefined operations of ASDF.
                                                              (line 187)
* monolithic-deliver-asd-op:             Predefined operations of ASDF.
                                                              (line  99)
* monolithic-deliver-asd-op <1>:         What happened to the bundle operations.
                                                              (line   6)
* monolithic-dll-op:                     Predefined operations of ASDF.
                                                              (line 103)
* monolithic-fasl-op (obsolete):         What happened to the bundle operations.
                                                              (line   6)
* monolithic-lib-op:                     Predefined operations of ASDF.
                                                              (line 101)
* monolithic-load-bundle-op:             Predefined operations of ASDF.
                                                              (line  97)
* monolithic-load-bundle-op <1>:         What happened to the bundle operations.
                                                              (line   6)
* monolithic-load-compiled-concatenated-source-op: Predefined operations of ASDF.
                                                              (line 193)
* monolithic-load-concatenated-source-op: Predefined operations of ASDF.
                                                              (line 191)
* monolithic-load-fasl-op (obsolete):    What happened to the bundle operations.
                                                              (line   6)
* operation:                             The object model of ASDF.
                                                              (line   6)
* operation-error:                       Error handling.      (line   5)
* prepare-op:                            Predefined operations of ASDF.
                                                              (line  38)
* prepare-source-op:                     Predefined operations of ASDF.
                                                              (line  46)
* program-op:                            Predefined operations of ASDF.
                                                              (line 105)
* program-op <1>:                        What happened to the bundle operations.
                                                              (line   6)
* program-op <2>:                        How can I produce a binary at a specific path from sources at a specific path.
                                                              (line   6)
* source-file:                           Pre-defined subclasses of component.
                                                              (line   6)
* system:                                Pre-defined subclasses of component.
                                                              (line  51)
* system-definition-error:               Error handling.      (line   6)
* test-op:                               Predefined operations of ASDF.
                                                              (line  53)



Tag Table:
Node: Top1689
Node: Introduction7988
Node: Quick start summary10417
Node: Loading ASDF12180
Node: Loading a pre-installed ASDF12482
Ref: Loading a pre-installed ASDF-Footnote-114317
Node: Checking whether ASDF is loaded14517
Node: Upgrading ASDF15431
Node: Replacing your implementation's ASDF16429
Node: Loading ASDF from source17881
Node: Configuring ASDF19004
Node: Configuring ASDF to find your systems19777
Ref: Configuring ASDF to find your systems-Footnote-123178
Ref: Configuring ASDF to find your systems-Footnote-223429
Ref: Configuring ASDF to find your systems-Footnote-323731
Node: Configuring ASDF to find your systems --- old style24204
Ref: Configuring ASDF to find your systems --- old style-Footnote-127880
Ref: Configuring ASDF to find your systems --- old style-Footnote-228118
Ref: Configuring ASDF to find your systems --- old style-Footnote-328921
Node: Configuring where ASDF stores object files29077
Node: Resetting the ASDF configuration30486
Node: Using ASDF31579
Node: Loading a system31790
Node: Convenience Functions32865
Ref: Convenience Functions-Footnote-138348
Node: Moving on38430
Node: Defining systems with defsystem38803
Node: The defsystem form39231
Node: A more involved example42766
Ref: A more involved example-Footnote-150019
Node: The defsystem grammar50727
Ref: rule-system-definition50932
Ref: rule-system-designator51098
Ref: rule-simple-component-name51419
Ref: rule-complex-component-name51540
Ref: rule-system-option51588
Ref: rule-system-option/asdf352376
Ref: rule-source-control52837
Ref: rule-module-option52880
Ref: rule-option53016
Ref: rule-person-or-persons54004
Ref: rule-system-list54052
Ref: rule-component-list54158
Ref: rule-component-def54243
Ref: rule-component-type54445
Ref: rule-other-component-type54579
Ref: rule-dependency-def54751
Ref: rule-dependency55360
Ref: rule-requirement55487
Ref: rule-dependent-op55581
Ref: rule-required-op55661
Ref: rule-pathname-specifier55854
Ref: rule-version-specifier55909
Ref: rule-line-specifier56296
Ref: rule-form-specifier56343
Ref: rule-method-form56398
Ref: rule-qual56533
Ref: rule-method-qualifier56612
Ref: rule-feature-expression56665
Ref: rule-operation-name57023
Ref: Simple component names57318
Ref: Complex component names58329
Ref: Component types59045
Ref: System class names59527
Ref: Build-operation60736
Ref: Pathname specifiers62322
Ref: Version specifiers66358
Ref: Feature dependencies68607
Ref: Using logical pathnames69478
Ref: if-feature option74119
Ref: Entry point75256
Ref: feature requirement75986
Node: Other code in .asd files76404
Node: The package-inferred-system extension77576
Node: The object model of ASDF83341
Ref: The object model of ASDF-Footnote-185759
Ref: The object model of ASDF-Footnote-286123
Node: Operations86458
Ref: operate87585
Ref: make-operation90365
Node: Predefined operations of ASDF90810
Ref: test-op93042
Node: Creating new operations101446
Node: Components106851
Ref: System names110473
Ref: Components-Footnote-1115291
Ref: Components-Footnote-2115603
Node: Common attributes of components115933
Ref: required-features117455
Node: Pre-defined subclasses of component123395
Node: Creating new component types125895
Node: Dependencies127203
Node: Functions129132
Node: Parsing system definitions131024
Node: Controlling where ASDF searches for systems133272
Node: Configurations133894
Node: Truenames and other dangers137461
Node: XDG base directory138769
Node: Backward Compatibility140215
Node: Configuration DSL140946
Node: Configuration Directories146509
Node: The here directive148376
Node: Shell-friendly syntax for configuration150303
Node: Search Algorithm151378
Node: Caching Results153272
Node: Configuration API156580
Node: Introspection158663
Node: *source-registry-parameter* variable158927
Node: Information about system dependencies159506
Node: Status160426
Node: Rejected ideas160889
Node: TODO163342
Node: Credits for the source-registry163529
Node: Controlling where ASDF saves compiled files164065
Ref: Controlling where ASDF saves compiled files-Footnote-1165495
Node: Output Configurations165547
Ref: Output Configurations-Footnote-1168436
Node: Output Backward Compatibility168506
Node: Output Configuration DSL171314
Node: Output Configuration Directories176889
Node: Output Shell-friendly syntax for configuration178478
Node: Semantics of Output Translations180041
Node: Output Caching Results181610
Node: Output location API182090
Node: Credits for output translations184558
Node: Error handling185087
Node: Miscellaneous additional functionality185948
Node: Controlling file compilation186420
Node: Controlling source file character encoding189758
Node: Miscellaneous Functions196809
Ref: system-relative-pathname197106
Ref: Miscellaneous Functions-Footnote-1203668
Node: Some Utility Functions203783
Node: Getting the latest version214951
Node: FAQ215914
Node: Where do I report a bug?216309
Node: Mailing list216864
Node: What has changed between ASDF 1 ASDF 2 and ASDF 3?217203
Node: What are ASDF 1 2 3?219398
Node: How do I detect the ASDF version?220443
Node: ASDF can portably name files in subdirectories222802
Node: Output translations224529
Node: Source Registry Configuration225572
Node: Usual operations are made easier to the user227209
Node: Many bugs have been fixed227829
Node: ASDF itself is versioned229929
Node: ASDF can be upgraded230914
Node: Decoupled release cycle232068
Node: Pitfalls of the transition to ASDF 2232999
Node: Pitfalls of the upgrade to ASDF 3237389
Ref: reinitializeASDFAfterUpgrade241141
Ref: Pitfalls of the upgrade to ASDF 3-Footnote-1242017
Node: What happened to the bundle operations242191
Node: Issues with installing the proper version of ASDF243440
Node: My Common Lisp implementation comes with an outdated version of ASDF. What to do?244003
Node: I'm a Common Lisp implementation vendor. When and how should I upgrade ASDF?244942
Node: After upgrading ASDF248968
Node: Issues with configuring ASDF250629
Node: How can I customize where fasl files are stored?251054
Node: How can I wholly disable the compiler output cache?252176
Node: How can I debug problems finding ASDF systems253637
Node: Issues with using and extending ASDF to define systems255066
Node: How can I cater for unit-testing in my system?255945
Node: How can I cater for documentation generation in my system?256849
Node: How can I maintain non-Lisp (e.g. C) source files?257378
Ref: report-bugs257824
Node: I want to put my module's files at the top level. How do I do this?257824
Node: How do I create a system definition where all the source files have a .cl extension?261030
Node: How do I mark a source file to be loaded only and not compiled?263035
Node: How do I work with readtables?264037
Node: How can I capture ASDF's output?267862
Node: LOAD-PATHNAME has a weird value268343
Node: How can I produce a binary at a specific path from sources at a specific path269943
Node: ASDF development FAQs271317
Node: How do I run the tests interactively in a REPL?271556
Node: Ongoing Work273125
Node: Bibliography273408
Node: Concept Index279440
Node: Function and Macro Index287949
Node: Variable Index297180
Node: Class and Type Index299501

End Tag Table


Local Variables:
coding: utf-8
End:
